CWE/GGN/FT-71/2025-26 INTEGRATED COMPLAINT MANAGEMENT SYSTEM FOR DAY TO DAY COMPLAINTS AND COMPREHENSIVE MAINTENANCE IN BASANT NAGAR UNDER AOR OF GE (AF) FARIDABAD

M&L for Petty repairs to leaking in bib tap, pillar tap, stop cock, Angle valve, WHB/ Wall mixer of any description by including changing the spindles with washer only etc, complete all as specified & directed.

M&L for Petty repairs to Easeing of doors, window of any description by including changing the hinges and nails only to refix the doors and windows with nails etc, complete all as specified & directed.

M&L for Petty repairs to sewage line bloackages useing bamboo and M S steel moulded bar near and inside of toilets to manhole and washroom gully trap, nhani trap and kitchn trap and manholes complete including removing of dirts and debris to cleanup the sewage dirts up to the satisfication of user end etc, complete all as specified & directed.

Demolition/ Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed .

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.

Complete all as per above item No 5.00 here in but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) with WPC as per user manual complete all as specified and directed. Note :- WPC will be measured and paid seperately.

Supply only liquid WPC

M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 3mm thick wall care putty for exterior/interior on old scraped wall/ceiling surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M&L for one coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 3mm thick wall care putty for exterior/interior on old scraped wall/ceiling surfaces and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of oil emulsion distemper over a coat of primer on surface of walls incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of distemper oil emulsion on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of white wash on surface of wall/ceiling complete all as spcified and directed.

M&L for preparation of old steel or iron surfaces of any description, n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed and specified.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for repair of RCC slab, column, beam, chajja, facia etc by removing of old portion of concrete and cleaning/brushing and removing of loose concrete/applying required cement slurry @ 3.5 kg/sqm making good with concrete 1:1.5:3 and applying 3 mm thick cement mortar 1:4 and finish the surface all as specified and directed. Note length of fins, facias shall be measured irrespective of any thickness and height.

M& L for Glazed ceramic jointless light/coloured group of size 350mmx450mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as spd and directted. Note : shade & design as approved by EIC/GE complete all as specified.

M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling tiles etc complete all as spd and directed.

Complete all as per above item No 26.0 here in before but area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors & dado complete all as speciefied and directed.

M&L for 20 to 25 mm thick Kota stone slab (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring /steps/ riser / skirting incl dismantling stone slabs etc complete all as spd and directed.

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white incl roundening the edge of stone complete all as spd and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and incl u/s dismantling complete all as spd and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes incl demolition complete all as spd and directed.

M & L for 100mm thick PCC 1:2:4 type B-2 (using 40 mm agg. ) in hardstanding /base of flooring incl demolition complete all as spd and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as spd and directed.

M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area incl demolition complete all as spd and directed.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of 60mm thickness any shape and size confirming to IS 15658 -2006, with grey cement, pigment incl 25mm thick sand filling complete all as specified and directed.

M & L broken stone hard core of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M & L for PCC 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition old u/s existing complete all as Spd & directed .

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' in on concrete slab 100mm all as specified and directed.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc incl taking down old u/s existing complete all as specied and directed

M&L for anodised aluminium powder coated door shutter , aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality / frosted glass or ACP sheet incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts,1xdoor stoper,1xHydralic door closer with each shutter any type incl demolition old u/s existing complete all as specified all as specified.

M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts incl taking down old u/s existing complete all as spd and directed.

M&L for aluminium Anodized powder coated fixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specifed & directed

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as spd and directed

M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified.

S & F for plain gypsum board panel 12.5mm thick on ceiling with and incl necessary GI frame used with ' T ' or any section accessories etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm incl dismantling of walls and ceiling board any type and two coat of OBD over a coat of putty complete all as specified and directed.

M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed

S & F for 10 -12 mm thick glass door, frosted with certain logo, fixed with floor spring, fixed on floor with two nos stainless steel handle of 300mm on each leaf and fixed partition arrangement incl necessary provision to lock the door completed all as specified and directed.

M&L for providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) of approved design/ pattern to flat surfaces incl all necessary MS frame work, 12 mm thick board and fittings as per standard practice and as per manufacturer's instrs reinforced with GI wire mesh incl dismantling of walls and ceiling board any type complete all as specifed and directed.

M&L for providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottom tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners & dismantling of walls and ceiling board any type complete all as spd and directed.

M&L for coral wall texture paint flasks type consisting of fiber natural gem, semi-precious pigmented granules, pearl and spary texture of high resistance, fire proof polymer alkali resistance, anti-corrosion and anti-condensation with natural stone, lime stone quartz etc. that given a scam less wall surface without joints, reples water ultra violet rays from sunlight including removing of, alage and fungus applied on wall or ceiling with trowel and roller complete all as specified and directed.

M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm including removing of, alage and fungus applied on wall with trowel /roller complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 40x6 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar , Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, incl taking down old frame/chowkat complete all as spd and directed.

Complete all as item No 54.00 here in before but here-in size of frame 125mmx60mm for doors complete all as specified.

S&F for factory made 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl taking down old u/s complete all as specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match incl taking down old u/s shutter complete all as specified and directed.

S&F for 2nd class H.W. factory made glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads & incl takig down old u/s shutter etc complete all as specified.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter & 3Nos- 100mm Aluminium hinges for each shutter complete all as specified and directed .

S & F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

S & F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and all specified.

S & F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.

S & F in repair 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane incl hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and glazed with oil putty complete all as specified and directed.

S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminum handles cast type anodized 200mm long (ISI Marked) complete all as specified and directed.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair, 150 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed and specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and as directed.

M&L for extruded brass handle, fancy type as approved by the GE, polished, 150mm long (ISI marked), complete all as specified.

M&L for continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified.

M&L for aluminium Fan light catch with 14mm catch and fixed suitable for any shutters, complete all as specified.

M & L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engr-in-charge.

S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as spd and directed.

Fixing only for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as spd and directed.

S&F of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern in repairs complete all as specified and directed.

S&F for Vitreous China wash basin (Pedestal pattern), White, flat back, size 550x400 mm incl brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs complete all as specified

fixing only for Vitreous China wash basin (Pedestal pattern), White, flat back, size 550x400 mm incl brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs complete all as specified

S&F for One piece water closet with bowl for cupled WC with PP soft seat cover, cistern hinges fixing accessories and accessories set of size 650x375x750mm, 3.S trap outlet with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified. Make: Jaquar Cat Part No. 3.S Trap-BO9NQ5CBDD or equivalent to makes mentioned in list of Approved Makes.

S&F for wall mixer with provision for overhead showes with 115mm long bend pipe on upper side, connecting legs and wall flanges, in repairs complete all as specified and directed. Make: Jaquar Cat Part No. CON 273KNUPR or equivalent to makes mentioned in list of Approved Makes.

S&F for CP brass Centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified. Make: Jaquar Cat Part No. CON-167KNV or equivalent to makes mentioned in list of Approved Makes.

S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified. Make: Jaquar Cat Part No. ACN 1131N or equivalent to makes mentioned in list of Approved Makes.

S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified.

S&F in repairs for Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F in replacement Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified.

S&F in replacement Brass Chromium plated shower roses 125 mm size incl arm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified.

S&F in repair Stainless steel sink without drainboard, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe incl sink coupling, 40mm waste fitting, overall size 915mmx460mm with bowl size 410 mm x 330mm x 160mm, etc complete all as specified and as directed.

S&F in repairs Toilet paper holder,stainless steel, fixed with and including chromium plated brass screws and and wooden/plastic cleats on walls, complete all as specified. Make: Jaquar Cat Part No. AKP 35753PS or equivalent make as mentioned in list of Approved makes

S&F in repairs for Health faucet brass CP with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified. Make: Jaquar Cat Part No. ALD CHR-573 or equivalent make as mentioned in list of Approved makes.

S&F in repair for Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms), complete all as specified.

S & F for Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe in repairs complete with all fittings all as specified and directed.

S & F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S& F for swan neck pillar cock fancy type chromium plated screw with iron pipe incl all fittings in repairs complete all as specified and directed.

S&F in repair for PVC connections 60cm long superior quality with PTMT nut on both sidecomplete all as specified and directed.

S&F in repair grating round 125mm size of CP complete all as specified and directed.

S&F in repair 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm45gms/ 40mm-60 gms) complete all as specified and directed.

S&F in repair 40 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm45gms/ 40mm-60 gms) complete all as specified and directed.

S & F in repair vitreous china urinals, half stall type (635x450mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Enger-in-Charge.

S&F in repair PVC water tank lid with locking arrangement complete capacity (500 ltr -1000 Ltr) complete all as spd and dir by Engr-in-charge.

S&F in repair for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting, GI nipple and any fitting ,dismantling existing water tank complete all as specified and directed.

S&F in repair for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting,GI nipple and any fitting , tank cover dismantling existing water tank complete all as specified and directed.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required all as directed and specified.

S&F GI tubing 15 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 15 mm dia bore to wall and laid in floors.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed..

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors.

S&F in repair for Gun-metal globe or gate valves of 20mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .

S&F in repair 25 mm PVC float valve incl ball and rod complete all as specified and directed by EIC.

S&F in repair 20 mm PVC float valve incl ball and rod complete all as specified and directed by EIC.

S&F in repair cast iron body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by EIC.

Demolition of cement concrete unreinforced in of any desciption and in any position not otherwise specifically provided for (sunken floor) and concrete debris and rubbish off to a distance n exc 100m as directed by the EIC.

M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken slab complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, cement concrete 1:7:12 F-2 (40 mm graded aggregate ) in lean concrete complete all as specified and directed.

M&L for repairs to collapsible steel gate including necessary gressing, welding, locking arrangement including serviceing etc complete as to bring in service condtions all as specified and directed

S&F for 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality (size/frame of board , design of bd , type of print on sheet , size of studd , samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL to 29 Mtr height incl stainless steel studds (min 4 studs at each board / sheet ) complete all as specified and directed incl dismantling of existing damaged sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818).

Dismantling of polycarbonated sandwitch type sheets

S&f 6.00 mm thick polycarbonate sandwitch type sheets in semi circle shape on roofs of desired colour and fixed with aluminium metal flat / angle / tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed

S&F in repair 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

S&F in repair corner shelf with CP railing 300mm x 300mm complete all as specified

S&F in repair CP jet for EWC along with pvc connection complete all as specified.

S&F in repairs for liquid soap container of PTMT fixed with and incl CP brass screws and wooden/plastic cleats.

S&F in repairs ventia blind for window including necessary items required for fix to wall complete all as specified

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and as directed.

S&F double legged door stopper of aluminium alloy with rubber complete all as specifified and as directed.

S&F in repair, 4 mm thick sheet glass for window/ ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer in Charge.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap with L type or J-type or cranked hook bolts in lieu of screws in roofs, wall etc with grade of zinc coating complete all as specified and directed by Engineer in Charge.

Complete all as per item No 141.00 but except Sheets complete all as specified and directed by Engineer in Charge.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting in ridges, hips valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating complete all as specified and directed by Engineer in Charge.

S&F for 110 mm bore PVC pipes single socketed pressure rating @ 4Kg/Sq cm length 'Medium grade' with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete, incl taking up/down old pipe with all fittings all as specified and and directed by Engineer in Charge.

Cleaning /removal of blockage 150 mm bore SWG pipes of depth not exc 1.50 mtr with mechnical process incl removing RCC man hole covers and refixing the same as before complete all specified

Cleaning /removal of blockage 150 mm bore SWG pipes of depth exc 1.50 mtr but not exc 3.00 mtr with mechnical process incl removing RCC man hole covers and refixing the same as before complete all specified

Dewatering/desilting of existing manholes of any size depth and removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (mechanical system or using suction pump where ever required up to any depth) and incl removing RCC manhole Covers and refixing the same after making the manhole fully functional, complete all as directed by Engineer-in-charge.

Dewatering/desilting for the septic tank of any capacity exc1.50 m and n.exc 4.5 m deep solid/semi-solid matter of silt residue both organic or inorganic in nature ( mechanical system or using suction pump where ever required up to any depth by working under foul conditions and disposal of the same in out of MoD area, complete all as directed by Engineer-in-charge. Note for Item : The Septic tank shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft or loose soil for shafts, wells,drains, manholes etc n exc 10Sqm on plan for sewage line & foundation etc all as specified and directed by Engr-in-charge.

Complete all as per item No 149.00 but exceeding 1.5 M depth and not exceeding 3 M for foundation, etc., and getting out in Soft/ Loose soil.

Complete all as per item No 149.00 but exceeding 3.0 M depth and not exceeding 4.50M for foundation, etc., and getting out in Soft/ Loose soil.

Demolition and breaking up drain pipes 100mm dia ( Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land all as directed.

Demoltion and breaking up existing sewag(SWR/ AC pipes and the like, 150mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m all as directed by Engr-in-charge.

Demoltion and breaking up existing sewage (SGSW / AC pipes and the like, 200mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m all as directed by Engr-in-charge.

S&F 110 mm PVC (SWR ) , pipes single socketd , in any length with rubber ring joints , laid in trenches or in floor complete all as specified & directed by Engr-in-Charge.

S & F RCC Class NP 3, 150 mm bore pipes laid and jointed complete with collars.

S & F RCC Class NP 3, 200 mm bore pipes laid and jointed complete with collars.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 100 mm bore.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore.

S & F in repair for precast factry made reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of 60mm thick (size of the cover will be itimated by the Engineer-in-Charge) complete all as specified and as directed.

S&F in repair mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165

S&F in repair precast factory made polycrete (SFRC) medium duty perforated drain cover 100 mm thick rectangle in shape upto 01 sqm area each with hole for drain complete all as specified and directed by Engr-in-charge.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified & directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 100mm dia pipe.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 150mm dia pipe.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 200mm dia pipe.

M&L for salt glazed stoneware gully trap, square or round moulded type 'P', 150x150mm size.

M&L for cement concrete 1:3:6 type C2 (using 20 mm graded stone aggregate) as in surface channels, drains and bed of manhole al as specified and as directed..

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, and mass concrete all as specified.

M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete

M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete

S&F for 100mm bore sand Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specifed and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specifed and dirtected.

S&F in repair for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specifed and dirtected.

S&F in repair 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specifed and dirtected.

S&F in repair for 100mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specifed and dirtected.

S&F in repair for 75mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specifed and dirtected.

S& F in repair for 75mm Cast Iron Cowl complete all as specifed and dirtected.

S& F in repair for 100mm Cast Iron Cowl complete all as specifed and dirtected.

S&F in repair for 75mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specifed and dirtected.

S&F in repair for 100mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specifed and dirtected.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

Complete all as per ser item No 185.00 here in before but laid in trench or in floor

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

Remoing excavated material n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as directed and specified

S&F SFRC drain covers with perforated holes factory made of size 0.50m x 1m x 75mm thick complete all as specified and directed

M&L for RCC 1:2:4 (using 20mm graded agg) pre cast cover slabs ( for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles all as specfied with one hole at centre and both side ring to carrying complete complete all as directed and specified.

M&L for TMT Bar 10mm dia and over cut to length bend t shape required including cranking, bending sprilly for hooping columns hooking ends and binding with and incl MS wire (Anneled) not less than 0.9mm dia or securing with clips

S&F in repairs for 300mm dia of NP3 reinforced concrete pipes, laid and jointed complete with collars incl taking out old u/s existing pipe completed all as specified and directed.

S&F in repair for 200mm dia of NP3 reinforced concrete pipes laid and jointed complete with collars incl taking out old u/s existing pipe complete all as specified and directed.

M&L for framed work such as grills, gratings etc with ends of bars shoulddered and /or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work incl dismentling old MS works complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above ground level, concrete debris and rubbish to a distance n exc 100m as directed by EIC

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm agg) in sub base of flooring and all as specified and directed

M&L for sand filling under floors or in foundation including watering and consolidation complete all as directed and specified

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60mm thickness with grey cement pigment complete all as specified and directed

M&L for refixing machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 of 60mm thickness, with grey cement, pigment complete all as specified and directed. Note:- interlocking paver block retrived from item no 200 to be used

M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg) as in plinth protection/path/ any paved area complete all as specified and directed

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken Modular boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. Note- Modular Switch and sockets will be measured and paid seperately.

For one light point/fan point controlled by one SP switch

For one bell point controlled by one No bell push

Complete all as per item No 207.00 above but for one 3 pin socket out let, 6 Amps on same board

Complete all as per item No 207.00 above but for one 3 pin socket out let, 6 Amps on Independent board

Complete all as per item No 207.00 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS all as specified and directed by Engineer-in-Charge. Note : Only one 15 Amp point will be in one circuit.

Supply and Fix Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.

Supply and Fix Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.

Supply and Fix Bell push Modular flush type 6 Amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, , suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Switch and sockets will be measured and paid seperately).

For one light point/fan point controlled by one SP switch

For one light point controlled by two 2 - way SP switches

For one bell point controlled by one No bell push

Complete all as per item No 217.00 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

Complete all as per item No 217.00 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

Complete all as per item No 217.00 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in existing PVC conduit including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Switch and sockets will be measured and paid seperately).

For one light point/fan point controlled by one SP switch

For one light point controlled by two 2 - way SP switches

For one bell point controlled by one No bell push

Complete all as per item No 221.00 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

Complete all as per item No 221.00 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

Complete all as per item No 221.00 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.

S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano 5 Amps flush type single pole two way suitable for 240 volt AC

S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.

Supply and fixing ding dong bell AC 230 volt single pole complete all as specified and directed

Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/ Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge.

Supply only Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.

Supply only Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.

Supply only switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only switch piano 5 Amps flush type single pole two way suitable for 240 volt AC

Supply only switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply only bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.

Supply only ding dong bell AC 230 volt single pole complete all as specified and directed

Supply only stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.

Supply only stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.

Supply only Rigid non-metallic PVC conduit of external diameter 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Taking down old unsv VTPN DB of any size.

Complete all as per item No 249.00 here in before but TPN 8 way

Complete all as per item No 249.00 here in before but TPN 4 way

Taking down old unsv MCB SPN DB of any size.

Complete all as per item No 253.00 here in before but SPN 8 way

Complete all as per item No 253.00 here in before but SPN 12 way

Supply and fixing in replacement of MCCB 200 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.

Supply and fixing in replacement of MCCB 160 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.

Supply and fixing in replacement of MCCB 125 Amps FP 415 volts 3 phase 50 HZ, ,Ics=100%Icu,breaking capacity 16 KA complete all as specified and directed.

Supply only MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB SP 40 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB SPN 40 Amps 10 KA, 240 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.

Supply only MCB TP 25-63 Amps 10 KA, 415 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.

Taking down unserviceable submain wiring of alluminium of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed.

M & L for in submain wiring with two run of 10.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 10.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 25 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall and surface conduit on ceiling portion only complete all as specified . (Note:- 3 Runs of 10.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose) .

Complete all as per item No 264.00 here in before but for 6.0 sqmm wire

Complete all as per item No 264.00 here in before but for 4.0 sqmm wire (For geyser and AC points)

Complete all as per item No 264.00 here in before but for 2.5 sqmm wire

Supply installation commissioning testing of tripod earthing in any kind of soil/strata complete with copper bonded earthing electrode chemical earthing system outer electrode dia 25 mm and 3 mtr long tightly filled with crystalline conductor mixture 250 microns copper coated along with bag of back bill compound 50 kg buried directly in the ground (earth pit not less than 2.25 meter deep below ground level) connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts,nuts,check nuts and washers and connecting earthing test point ,including CI covers ,frame and PCC (1:3:6) type C-2 using 20 mm graded stone aggergate as in earthing pit with CI cover and framing including necessary earth work etc incl taking down old u/s earthing material complete all as specified . Note- PCC chamber shall be constructed at least one meter away from the building shall be provided in slanting manner. Note- PCC cover pit shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 kg (sqm in liew of CI)

Material and labour for galvanised iron strip 25 X 4 mm with saddles and fixing screws and connected as per site requirement comlete all as specified and as directed by Engineer-in-Charge.

Complete all as per item No 269.00 here in before but 4mm dia GI wire

Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply only wall mounted LED bulk head fittings, 10 watt, , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge.

Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply only surface mounted round shape 15 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only surface mounted round shape warm white 24 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only focus light round shape warm white LED 12 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only focus light round shape warm white LED 6 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 3000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply only PVC gang box suitable for one switch 5 Amps complete with screw and necessary arrangement complete all as specified and directed by Engineer in Charge.

All as per srl item 281.00 above but for one 5 amps switch socket outlet.

All as per srl item 281.00 above but for one 15 amps switch socket outlet.

Supply only Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified and directed.

Supply only exhaust fan heady duty metal body 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells / Crompton Greaves or equivalet makes mentioned in approved makes list.

Supply only exhaust fan heady duty metal body type 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Supply only exhaust fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Supply only wall mounting fan heady duty 400 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Model No- Swing Penta Wall Fan or equivalent to makes mentioned in Approved makes list.

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.

Supply only ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote control complete all as specified and directed by Engineer-in-Charge.

Supply only fan capacitor with copper wire plastic body 2.5 mfd.

Supply only fan capacitor with copper wire plastic body 3.15 mfd.

Supply only fan capacitor with copper wire plastic body 4.0 mfd.

Taking down the old white hylem sheet from the existing flash metal box and replacing new supper quality white hylium sheet of size 8" x 10" complete all as specified and as directed by Engineer-in-Charge.

Complete all as per ser item No 294 here in before but of size 5" x 5" complete all as specified and as directed by Engineer-in-Charge.

Complete all as per ser item No 294 here in before but of size 8" x 5" complete all as specified and as directed by Engineer-in-Charge.

Complete all as per ser item No 294 here in before but of size 9" x 13" complete all as specified and as directed by Engineer-in-Charge.

Supply only Batten Holder PVC white suitable for retrofit type CFL/LED Lamp cxomplete allas specified and as directed.

Supply & fixing in replacement White cover plate with frame,1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement White cover plate with frame,2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Metal flush box 1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular Metal flush box 2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.

Supply only Modular MCB SP 25 Amps 10 KA, 240 volt 1 module all as specified and directed by Engineer-in-charge.

Supply only 3 pin plug top 15 Amps all as specified and directed by engineer-in-charge.

Supply only LED flood light fitting 150 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.

Supply only LED flood light fitting 200 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.

Supply only LED street light fittings 90 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.

Supply only LED street light fittings 120 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.

Supply only of GI pipe light grade 40 mm dia bracket to make L type 1.5m long for bldg light fitting complete all as specified and direted by Engr-in-Charge.

Supply only of MS flat clamp of size 30mmx5mm thick including nuts ,bolts and washer suitable for bldg light fitting complete all as specified and as directed by Engr-in-Charge.

Supply Only Disinfection hypo chlorine based having chlorine percentage 5-6 % in 40 Ltr jar all as specified and directed by engineer in charge.

Net Contract Sum will be after deducting Sch of Credit of Rs 1,10,067.50

Please Enable Macros to View BoQ information