Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.0 LAccepted-Finance 428 SURAJ PALACE C A ROAD GANDHIBAG NAGPUR MAHARASHTRA 440002 | NAGPUR | MAHARASHTRA | 440002 | ₹10.0 L | 1 | Accepted-Finance Lowest Rate |
| 2 | 2₹12.4 LRejected-Finance GIJJROLI AGRA ROAD HATHRAS UTTAR PRADESH 204101 INDIA | HATHRAS | HATHRAS | UTTAR PRADESH | 204101 | ₹12.4 L | 2 | Rejected-Finance Higher Rate |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technical Bid Found Not ok. |
| Sl No | Description | Qty | Unit | M/s Manisha Trading Co. L1 | SUMIT ENGINEERING L2 |
|---|---|---|---|---|---|
| 1.00Supply of 33 KV Line Material as per relevant ISS | |||||
| 2.00 | Stone Pad 300x300x75 mm | 30 | No | 100 ₹3,000 | 120 ₹3,600 |
| 3.00 | F Bracket | 37 | No | 300 ₹11,100 | 220 ₹8,140 |
| 4.00 | Aluminium Binding Wire | 5 | Kg | 250 ₹1,250 | 220 ₹1,100 |
| 5.00 | Nut & Bolts with Washer | 31 | Kg | 100 ₹3,100 | 220 ₹6,820 |
| 6.00 | Number Plate with Clamp | 23 | No | 100 ₹2,300 | 220 ₹5,060 |
| 7.00 | Danger Board with Clamp | 23 | No | 150 ₹3,450 | 220 ₹5,060 |
| 8.00 | Barbed Wire | 56 | Kg | 90 ₹5,040 | 220 ₹12,320 |
| 9.00 | MS Iron Angle 65x65x6 mm, 4300 mm | 7 | Set | 1,800 ₹12,600 | 2,200 ₹15,400 |
| 10.00 | Top Channel 125x65x6x3200 mm with Clamp | 9 | No | 2,500 ₹22,500 | 1,800 ₹16,200 |
Tender Value
₹15 L
EMD Value
₹15,000
Closing Date
27 Jan 2026, 12:00 pmClosed
SE EDC Etah
Vidhyut Colony, Aruna Nagar, Railway Road, Etah.
Work for Shifting of 33 KV, 11 KV and LT lines and other electrical equipments in Aliganj-Kampil Marg Chaudikaran under EDD-Pilua, Etah on semi turnkey basis (Deposit Scheme)
2025_DVVNL_1103171_2
22/2025-26/EDC ETAH
Open Tender
Electrical Works
District-Etah
As per Tender Documents.
2 documents required · 2 mandatory
₹1,180
DVVNL
₹15,000
12 Feb 2026
21 Jan 2026
27 Jan 2026
21 Jan 2026
27 Jan 2026
21 Jan 2026
Supply of 33 KV Line Material as per relevant ISS
Stone Pad 300x300x75 mm
F Bracket
Aluminium Binding Wire
Nut & Bolts with Washer
Number Plate with Clamp
Danger Board with Clamp
Barbed Wire
MS Iron Angle 65x65x6 mm, 4300 mm
Top Channel 125x65x6x3200 mm with Clamp
Guarding Angle with Clamp
Clamp with Nut & Bolts
PG Clamp for Dog
Jointing Sleev for ACSR Dog Conducor
Earth Wire Clamp with N&B
Aluminium Tape
Aluminium Paint
Red Oxide Paint
Supply of 11 KV Line Material as per relevant ISS
Stone Pad 300x300x75 mm
Guarding Angle with Clamp
Barbed Wire
F Bracket with Nut & Bolts
Clamp with Nut & Bolts
Danger Board with Clamp
T off Channel 125x65x6x1300 mm with Clamp
Dropper Channel 100x50x6x2028
Top Channel 100x50x2240 mm with Clamp
MS Base Angle 75x75x6 mm
MS Cross Bracing Angle
PG Clamp
Aluminium Lug 120 sq mm
Supply of LT Line Material as per relevant ISS
Stone Pad 300x300x75 mm
Suspension Clamp
I Hook
Dead End Clamp
Pricing Connector
LT Clamp
Three Phase Distribution Box Clamp
Erection Work of 33 KV Line
Safe carriage of line material from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Safe carriage of 9 Mtr PCC pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Safe carriage of 11/13 Mtr Long ST pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Erection of 9 mtr PCC Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.
Erection of 13 mtr ST Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.
Erection of 13 mtr ST Pole Try Pole including fixing of all HT/LT accessories etc. complete, pole should be grouted properly as per DVVNL/RESPO norms.
Erection of 11 mtr ST Pole Double Pole/Section Pole including fixing of all HT/LT accessories etc. complete, pole should be grouted properly as per DVVNL/RESPO norms.
Erection of 11 mtr ST Pole as Fore Pole including fixing of all HT/LT accessories etc. complete, pole should be grouted properly as per DVVNL/RESPO norms.
Dismentalling of old ACSR Dog Conductor stacking of proper place.
Laying, sagging stringing, binding, jumpering & fixing of all accessories etc of ACSR Dog Conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.
Stone Pad 300x300x75 mm
F Bracket
Alluminium Binding Wire
Number Plate with Clamp
Danger Board with Clamp
Barbed Wire
PG Clamp for Dog
Jointing Sleev for ACSR Dog Conducor
Alluminium Tape
Alluminium Paint
Red Oxide Paint
Laying of GI Wire 8 SWG
Laying of GI Wire 10 SWG
Earthing Complete
Stay set complete including the work of nozzling etc.
Dismentalling of ST Pole stacking of proper place
Safe carriage of dismantilled material (Cross Arm Clamp, F Clamp, Top Channel & other accessories etc.) from the pit side to the store distance 0 to 60 Km. with loading & unloading at both ends and proper stacking in store.
Safe Carriage of Dismantiled ST Pole from the pit side to store in distance 0 to 60 km with loading and unloading at both ends proper stacking in store.
Erection Work of 11 KV Line
Safe carriage of line material from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Safe carriage of 8.5 Mtr Long PCC pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Safe carriage of 11 Mtr Long ST pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc complete, pole should be gruted properly as per DVVNL/Respo norms.
Erection of 11 mtr ST Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.
Erection of 8.5 mtr PCC as Double Pole/Section Pole including fixing of all HT/LT accessories etc. complete, pole should be grouted properly as per DVVNL/RESPO norms.
Dismentalling of old ACSR Weseal Conductor stacking of proper place.
Laying, sagging stringing, binding, jumpering & fixing of all accessories etc of ACSR Weseal Conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.
Stone Pad 300x300x75 mm
Barbed Wire
F Bracket with Nut & Bolts
Danger Board with Clamp
PG Clamp
Alluminium Lug 120 sq mm
Laying of GI Wire 6 swg
Laying of GI Wire 8 swg
Earthing Complete
Stay set complete including the work of nozzling etc.
11 KV DO Fuse Set
LT Lead 1x120 sq mm
Safe carriage of dismantilled material (Cross Arm, Clamp, F Clamp, Top Channel & other accessories etc.) from the pit side to the store distance 0 to 60 Km. with loading & unloading at both ends and proper stacking in store.
Safe Carriage of Dismantiled ST Pole/Gattere & Rail Pole from the pit side to store in distance 0 to 60 km with loading and unloading at both ends proper stacking in store.
Erection Work of LT Line
Safe carriage of line material from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Safe carriage of 8.5 Mtr Long PCC pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Safe carriage of LT AB cable (3.5x95) sq. mm from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.
Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc complete, pole should be gruted properly as per DVVNL/Respo norms.
Dismentalling of LT AB cable (3.5x95) sq. mm stacking of proper place.
Laying, sagging stringing, binding, jumpering & fixing of all accessories etc. of LT AB cable (3.5x95) sq. mm on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.
Stone Pad 300x300x75 mm
Suspension Clamp
I Hook
Dead End Clamp
Pricing Connector
Earthing Complete
3 Phase Distribution Box with Clamp
Stay set complete including the work of nozzling etc.
Safe carriage of dismantilled material (LT AB Cable & other accessories) from the pit side to the store distance 0 to 60 Km. with loading & unloading at both ends and proper stacking in store.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
BOQ_2045146.xls
BOQ • 0.28 MB
UploadDoc22.rar
Tender Documents • 2.95 MB
Download all tender documents and submit your bid