Construction of E type quarter for AE Estimator RW Division BoudhatMarjakudfor the year 2025-26

Earth work in excavation of foundation in hard soil with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at place away from work site with all leads and lifts including cost of all labour T&P articles and dewatering if required for the work etc. complete as per specification and direction of the Engineer-in-charge.

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, additional charges, DMF 10% & EMF 5% over royalty Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge.

Providing Cement concrete (1:3:6) in foundation upto a required depth below ground level and upto a required height above ground level/bed level using 4cm size hard granite metal of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers not exceeding 15cm thick compacting with proper packing to proper slope & level including watering, curing and cost, conveyance, Cess royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer – in – charge

Providing Cement Concrete of proportion (1:2:4) with 12mm size hard black granite chips of approved quality and from approved quarry including hoisting lowering, laying and compacting concrete watering, curing including cost, conveyance, royalty and taxes of all materials, labour T&P articles required, , Cess royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer – in – charge

Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (23 cm x 11 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.

Flyash brick masonary in cement mortar (1:6) in superstructre and similar such types of works with all necessary projections using flyash bricks of (23 cm x 11 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Column Base

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Lintel

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Plinth Beam

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. chajja

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Roof slab

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Beam and column

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Providing, fitting and fixing of 8 mm to 12 mm thick matte vitrified tile of size (600 x 600mm) of printed series confirming to IS specification having minimum breaking strength 1400 kg / Sq.cm in floowing in all floors at all heights on 20mm thick bed of C.M. (1:4) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge.

12mm (1/2”) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties , etc. complete in all respect in all floors as per direction of the Engineer in charge.

16mm (5/8") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge

20mm (¾") thick cement plaster in cement mortar (1:6) over stone work after racking out the joints including cost conveyance, royalty and taxes of all materials labour and T&P required for the work and including watering curing and finishing etc. complete in all respects in all floors as per direction of the Engineer-in-charge.

6mm thick cement plaster in cement mortar (1:4) to RCC surface smooth including watering and curing with the cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Wall painting two coats with weather paint of approved shade on wall surface to give an even shade over a coat of primer including cost of brushes and putty including cost of paint scrapping, cleaing rubbing scaffloding with cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge.

Painting with oil bound cement primer including cost of the primer sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P article required for the work etc. complete in all respect inclouding cost of paint or as per direction of the Engineer-in-charge.

Painting one coat primer to new iron work including cost of the primer sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc., complete in all respect including cost of paint or as per direction of the Engineer-in-charge.

Painting two coat enamel paint over the one coat primer to new iron work including cost of the enamel paint, sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc., complete in all respect including cost of paint or as per direction of the Engineer-in-charge.

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame section No. 4095, 4096, 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including llocking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.

Providing fitting, fixing of Al. door having OEL anodized shutter section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm thick plain glass in top portion with 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete.

Providing fitting, fixing of Al. door having OEL anodized shutter section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete.

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transportation by mechanical means and unloading the soil within a lead of 5 km on properly prepared and scientifically approved surface including spreading and levelling the earth etc. completed as per the direction of Engineer-in-Charge

Compound wall Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, additional charges, DMF 10% & EMF 5% over royalty Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge.

Providing Cement concrete (1:3:6) in foundation upto a required depth below ground level and upto a required height above ground level/bed level using 4cm size hard granite metal of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers not exceeding 15cm thick compacting with proper packing to proper slope & level including watering, curing and cost, conveyance, Cess royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer – in – charge

Providing Cement Concrete of proportion (1:2:4) with 12mm size hard black granite chips of approved quality and from approved quarry including hoisting lowering, laying and compacting concrete watering, curing including cost, conveyance, royalty and taxes of all materials, labour T&P articles required, , Cess royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer – in – charge

Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (23 cm x 11 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.

Flyash brick masonary in cement mortar (1:6) in superstructre and similar such types of works with all necessary projections using flyash bricks of (23 cm x 11 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge.

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Column Base

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Beams & column

R.C.C. work (1:1½:3) M-20 in using 12mm size crusher broken hard granite chips including watering, curing, cenering and shuttering with all cost, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc, cess with T&P, conveyance taxes etc. complete as per the direction of the Engineer-in-charge. Roof slab

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

16mm (5/8") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities etc completed in all respect in all floors as per direction of the Engineer-in-Charge

12mm (1/2”) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties , etc. complete in all respect in all floors as per direction of the Engineer in charge.

Wall painting two coats with weather paint of approved shade on wall surface to give an even shade over a coat of primer including cost of brushes and putty including cost of paint scrapping, cleaing rubbing scaffloding with cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Painting with oil bound cement primer including cost of the primer sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P article required for the work etc. complete in all respect inclouding cost of paint or as per direction of the Engineer-in-charge.

Painting one coat primer to new iron work including cost of the primer sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc., complete in all respect including cost of paint or as per direction of the Engineer-in-charge.

Painting two coat enamel paint over the one coat primer to new iron work including cost of the enamel paint, sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc., complete in all respect including cost of paint or as per direction of the Engineer-in-charge.

Cement concrete approach road Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, additional charges, DMF 10% & EMF 5% over royalty Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge.

Providing Cement concrete (1:3:6) in foundation upto a required depth below ground level and upto a required height above ground level/bed level using 4cm size hard granite metal of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers not exceeding 15cm thick compacting with proper packing to proper slope & level including watering, curing and cost, conveyance, Cess royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer – in – charge

Providing Cement Concrete of proportion (1:2:4) with 12mm size hard black granite chips of approved quality and from approved quarry including hoisting lowering, laying and compacting concrete watering, curing including cost, conveyance, royalty and taxes of all materials, labour T&P articles required, , Cess royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer – in – charge