RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Ambulances ( 1 pieces ) Technical Specifications * As per GeM Category Specification 1/5 Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Vehicle Engine Capacity (in cc) 3455.0 * Type of Fuel Diesel Diesel Vehicle Emission Complaince BS-IV BS-IV Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (in KM-Liter) 8.0 8.0 - 50.0 Or higher Top Speed (KM/Hour) 90.0 90.0 - 200.0 Or higher Acceleration(0-100K mPH) 55.0 1.0 - 55.0 Or lower Gradeability of Vehicle (in Degrees) 10.2 * Air Conditioning With With Engine BHP@rpm (HP@rpm) - * Engine Torque Max@rpm (N-M@rpm) - * No. of Cylinder in Engine 4.0 4.0 - 10.0 Or higher No.of Doors 3.0 * Fuel Tank Capacity 90.0 90.0 - 100.0 Or higher Ground Clearance 206.0 * Wheel Base 2515.0 * Kerb Weight 3040.0 3040.0 - 5000.0 Or higher Gross Vehicle Weight 6200.0 6200.0 - 5000.0 Or higher BIS marked Pneumatic Tyres and tubes for both front and rear Yes Yes Vehicle Transmission System Manual Manual No. of Speed/Forward Gears 5.0 * Type of Wheel drive Two Wheel drive( Rear Wheel) Two Wheel drive( Rear Wheel) Drive Axle Rear Rear 2/5 Type of Steering Power Power Turning Radius 5000.0 * Vehicle Brake ABS Fitted No No Front Vehicle Brake Drum Brake Drum Brake Rear Vehicle Brake Drum Brake Drum Brake Vehicle Air Intake System TurboCharged TurboCharged Driver Airbag No No Certification Parameters Vehicle Certification ARAI/VRDE/ICAT No - * Performance Parameters Warranty Time (in months) 12.0 12.0 Warranty Distance (Km) unlimited in warranty period yes yes Battery Warranty (in months) 12.0 * No. Of Free Service 7.0 7.0 Low Fuel warning Light With With Central Locking No No Transportation Charges including transient insurance and temporary registration(in Rs/Km) - * Constructional Parameters Vehicle Colour Type Solid Solid Colour of the Vehicle White White Type of Vehicle Body Monocoque Monocoque Length of Vehicle Body (mm) 4919.0 4919.0 - 10000.0 Or higher Width of Vehicle Body 2100.0 * Height of Vehicle Body 2725.0 * Boot Space (in Litres) 0.0 0.0 Size Of Tyre (mm) - * Size of Wheel - * Number of Stretchers 4.0 4.0 - 10.0 Or higher Hat type tube diameter for body of main structure welded with NA for Monocoque NA for Monocoque 3/5 Hat type tube diameter( thickness) for side and roof of main structure welded with NA for Monocoque NA for Monocoque Base Frame Structure ISMC ISMC Exterior Panel of side body and roof NA for Monocoque NA for Monocoque Interior Panel of side body and roof GI sheet of thickness 0.8 mm (min) GI sheet of thickness 0.8 mm (min) Flooring Made Out from ISI Marked 12 mm thick BWR grade plywood covered with Vinyle Aluminum sheet Yes Yes Seating Plan Yes Yes Doors Yes Yes Glasses Yes Yes Medical cabinet inside of rear saloon No No swiveling Fan in side of rear saloon Yes Yes SS washbasin with water tank in side of rear saloon Yes Yes Exhaust Fan Yes Yes Other fitments - Roof revolving light
RequiredSiren etc Yes Yes Rear Saloon Yes Yes Boot Space availability No No Day & Night View Mirror Yes Yes * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
