Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹61.0 LAccepted-AOC 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹68.9 L+₹6.8 L (11.0%)Rejected-Finance A 212B GALI NO 1 SHAKARPUR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L2 | Rejected-Finance other than lowest. | |
| 3 | L3₹70.0 L+₹7.9 L (12.7%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L3 | Rejected-Finance other than lowest. | |
| 4 | L4₹70.8 L+₹8.7 L (14.0%)Rejected-Finance POCKET A 2 310 SECTOR 08 ROHINI NEW DELHI 110085 | NEW DELHI | NORTH WEST DELHI | DELHI | 110085 | L4 | Rejected-Finance other than lowest. | |
| 5 | L5₹70.8 L+₹8.7 L (14.0%)Rejected-Finance 1 206 SHOP NO 71 MANDIR MARKET SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L5 | Rejected-Finance other than lowest. |
Tender Value
₹83.8 L
EMD Value
₹1.5 L
Closing Date
20 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NEW DELHI, DELHI CANTT
HQ CWE NEW DELHI, RAO TULA RAM MARG, DELHI CANTT -10
SPL REPAIR OF BLDG No. M-98 (OR MD ACCN) AT VASANT RANGE COLONY UNDER GE (SOUTH ) DELHI CANTT-10
2023_MES_586488_1
CWE/ND-51/2022-23
Open Tender
Miscellaneous Works
Item Rate
120 days
DELHI CANTT
PLEASE REFER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹1,000
GE SOUTH
₹1.5 L
Yes
28 Jun 2023
20 Mar 2023
22 May 2023
20 Mar 2023
20 May 2023
13 May 2023
Amount
Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar complete all as specified & directed.
Demolition of mud in roof, any thickness, including plastering and leeping including necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing demolished material to a distance exc. 1.5 Km but n.exc 5 Km complete all as specified & directed.
M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm on existing surfaces complete all as specified & directed.
M&L for 50 mm thick (average thickness) plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in roof padding to maintain the uniform slope complete all as specified and directed.
M & L for rendering 15 mm thick (average) on concrete surfaces in Cement Mortar (1:4) on roof, mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement complete all as specified & directed. Note : - WPC shall be measured & paid separately.
S&F APP based polymeric water proofing membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/Sqm laid over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per Sqm by torch application including cleaning of surface complete all as per approved manufacturer's instructions complete all as specified and directed . Note:-The water proofing treatment shall be carried out by manufacturer or their authorised applicators as per manufactures instruction and as directed .
M&L for cement concrete tiles 25cm x 25cm x22mm thick laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in cement mortar 1:3. complete all as specified and directed .
Demolition unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed.
Demolition of PCC in ground floors and pavings n.exc 15 cm thick below or above ground level (unreinforced) complete all as specified & directed.
Demolition of cement concrete above ground floor exc. 15cm thick complete all as specified & directed.
M&L for applying a coat of cement slurry @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementatious flexible composite coating system (Make tapercreate P-151 of M/S CICO or equivalent from approved makes specified in Appendix ' B' )@ 0.253 Kg/Sqm after cleaning and drying the old/new surfaces then applying the layer of fibre glass cloth while the above coat is still green. The overlap of fibre glass cloth shall be not less than 100 mm and then applying 1.5 mm thick layer @ 1.288 Kg/Sqm mixed with tapecreate or equivalent from approved makes specified in Appendix ' B' @ 0.570 Kg/Sqm and coarse sand @ 1.289 Kg/Sqm. Allow the treatment to air curing for four hours followed by water curing for 48 hours complete all as specified & directed.
M&L for 10 mm thick cement plaster on brick/ concrete surface in cement mortar 1:3, finished even and smooth surface without using extra cement but mixed with liquid water proofing compound as per manufacturer's instructions as in sunken floor complete all as specified & directed. Note:- WPC shall be measured & paid separately).
Supply only liquid water proofing compound complete all as specified & directed.
M&L Cement concrete Type E2 (1:5:10) using 40 mm graded stone aggregate in mass concrete in sunken floor complete all as specified.
M&L 75 mm thick PCC type D2 (1:4:8) using 40 mm graded stone aggregate as in sub base of flooring complete all as specified & directed.
M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) as in sub floors finished rough complete all as specified & directed.
Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc. and brushing and applying neat cement slurry with 3.0 Kg of cement per square metre complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.
M & L for Glazed Ceramic coloured tiles in vertical surface 450X350X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed.
M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed.
M&L 40mm thick PCC flooring 1:2:4 type B1 using 20mm graded stone aggregate finished even & smooth without using extra cement complete all as specified & directed.
M&L for machine cut 20mm thick kota stone slab flooring, and (one Pieces) as in steps (Treads), over and including cement screed bed 20mm thick with cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.
M&L for Machine cut kota stone slab 16 to 18 mm thick as in riser of steps, skirting, dado and pillar laid over & including 10mm thick rendering in cement mortar 1:4 as a backing coat on walls and jointed & pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.
S&F in repair 1st quality Vitreous China, semi pedestal pattern (Anglo Indian type) wash down water closet pan, white including fixing bolts, connection to flushing cistern and flush pipe & drain pipe (or out going pipe) and to flushing pipe, anti-syphonage pipe, 'P' or 'S' trap etc. complete all as specified & directed.
S&F in repair 1st quality vitreous china wash hand basin flat back size 400x350x150mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm X 600 mm long PVC waste pipe complete all as specified and directed. Note - WHB will be supported on angle iron of size 50x50x5mm duly painted with two coats of synthetic enamel paint over a coat of primer for securing WHB).
Material and labour for plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, coping, benching, roof kerb or mud stops, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, apex stones, including form work to concrete surfaces complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed
M & L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes over and including cement mortar bedding of 20 mm in cement mortar 1:6 including pointing in white cement using marble dust with admixture of pigment to match complete all as specified and directed.
M & L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade other than white and black complete all as specified & directed.
M&L for rounding to edges of stone slabs on edge, such as in steps, window cills, cooking platform and other similar situations including necessary polishing to edges to match with shade of stone complete all as specified and directed.
S&F in repairs low level flushing cistern of 10 litres capacity PVC valve less, syphonic action type, white with inlet ball valve float and handle complete all as specified & directed.
S&F in repairs PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, for flushing cistern complete all as specified & directed.
S&F brass CP mixer fancy type for wash hand basin screwed down for iron pipe of 15 mm bore pipe including two nos. PVC connection 15 mm size length 600 mm with brass nut, braided with stainless steel wire netting suitable for hot & cold water supply complete all as specified & directed.
S&F in repairs elegant mirror PVC cabinet (PTMT alloy) complete all as specified & directed. Make: Prayag, Cat No 551 or equivalent of makes specified in Appendix 'B' to particular specification.
S&F stainless steel soap dish fixes with stainless steel screw complete all as specified & directed.
S&F powder coated stainless steel utility hook 500mm long with 06 pegs fixed with 03 Nos. screws complete all as specified & directed.
M&L Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified & directed.
S&F PVC laminated GI wire 2.00mm dia for cloth drying including necessary fastener as per site requirement complete all as specified and directed.
S & F in repairs brass chromium plated tubular towel rail, 20 mm dia D type , 60 cm long between flanges complete all as specified & directed.
S&F in repairs brass chromium plated shower rose of size 125 mm with arms including fixing to pipe complete all as specified & directed.
S&F in repairs bib tap, brass chromium plated fancy type, long body screwed down, screwed for iron pipe 15 mm bore complete all as specified & directed.
S&F in repair Concealed stop cock,15 mm bore, chromium plated ,with long shank and cup, fancy type, complete all as specified & directed.
S&F in repair 15 mm dia brass chromium plated angle valve screwed at ends including necessary extension piece and fixed complete all as specified & directed.
S&F in repairs Cast iron floor trap with grating including jointing to waste pipe with cement joint, dia of outlet 75 mm fixed in cement concrete type B1 (1:2:4) complete all as specified & directed.
S & F in repairs Sinks with drainage board made of stainless steel 304 grade, 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including pre-painted cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & directed.
Supply and fix PVC waste pipe 32/40 mm bore, 65 cm long complete all as specified & directed.
S&F stainless steel plate rack 304 grade made of 1mm thick stainless steel sheet of size 775 mm x 900 mm x 250mm consisting of 3 shelf for bowls and one shelf for keeping six nos. of big utensil and seven nos. of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each , refixing in the same opening complete all as specified & directed.
Taking down chowkhat or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed.
Taking down chowkhat or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified & directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame - 125 x 60mm, including filling hollow of frame with plain cement concrete(1:3:6 ) complete all as specified & directed.
S&F mild steel work such as in door Chowkhat,, tie bars etc. including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc. confirming Fe 410-0 or Fe 310-0 complete all as specified & directed.
M&L for Cement concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) Type C0, 1:3:6 (using 12.50 mm graded stone aggregate) complete all as specified & directed.
S&F fabricated aluminium window with powder coated anodized aluminium frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminium anodized 'D' handle, hinges, peg stays, tower bolts, etc. including jointing cleats for fixing builder's hardware fittings including stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminium snap beads complete all as specified & directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.
M&L fabricated powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18mm (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter Skelton covering half of span of opening ) including provision for making windows air tight, including 95mm aluminium handle with spring lock including stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with steel wire staples and including 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified & directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.
S&F Aluminium powder coated Grill 7.5 mm thick (DECO grill DG 103 or equivalent) fixed with suitable 'F' Section (No 8584) 15.30 X23.40X 1.40 mm (minimum), fabricated and riveted to aluminium window / ventilators complete all as specified and directed .
S&F factory made 35mm thick plain framed 2nd class hardwood panelled shutter (two panels ) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle with commercial veneering on both face, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and chemically pressed, treated complete including 15 to 20 mm taper bedding on one face of second class hardwood fitted to chowkhat complete all as specified & directed.
S&F factory made 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhat complete all as specified & directed.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc. complete all as specified and directed.
S&F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F factory made solid FRP door frame of size 90mm x 45 mm made out of FRP sheet having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness complete all as specified & directed.
S&F factory made solid panel FRP door shutter 30mm thick premoulded design made out of solid core, laminated 1.5 mm to 2mm thick GRP/FRP made of superior all season, weather resistant polyester gel coat followed by laminating 2 layers of polyester resin and 450 gsm glass fiber mat, termite & water resistant complete as per manufacturers specification, as specified & directed.
S&F 100mm size butt hinges stainless steel of 304 grade complete all as specified and directed.
S&F sliding door bolt of stainless steel of 304 grade, 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed etc. complete all as specified and directed.
S&F 200 mm long barrel tower bolt aluminium anodised with stainless steel bolt complete all as specified and directed.
S&F handle of stainless steel of 304 grade size 200mm size long etc. complete all as specified and directed.
S&F brass magic eye for panelled/flush shutter 35mm thick complete all as specified and directed.
M&L for preparing old decorated steel surfaces of any description not otherwise described over 10 cm width or girth & applying two coat of synthetic enamel paint of any colour complete all as specified & directed.
M&L preparation of newly surfaces of steel of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide primer complete all as specified & directed.
M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & including one coat of pink primer complete all as specified & directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified & directed.
S& F in repairs factory made PVC cupboard frame of size 75 mm x 40 mm with a wall thickness of 4mm , made out of extruded 4 mm thick prelam PVC sheet of density 600Kg/Cum manufactured by an ISO -9001-2015 certified company , reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150 mm long brackets of 10 mm x 10 mm MS Square tubes .The door frame shall be fixed to wall using 65 /100 long MS screws to be provided for each vertical member and minimum of 2 nos. of screw to be provided horizontal member etc. . complete all as specified & directed.
S&F factory made PVC flush type shutter and partition of 18 mm thickness with one side lamination & other side balancing lamination sheet consisting of Carcass 18mm thick PVC sheet of density 600Kg/cum manufactured by an ISO -9001-2015 certified company , and all required brackets, SS screw etc. The panel shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as per drawing including necessary fittings, locking and fixing arrangement i.e. piano hinges, handles, magnetic catches etc. complete all as specified and directed .
S&F 100 mm long handle of stainless steel grade 304 complete all as specified and directed.
S&F 100 mm long hasp and staple, safety type of stainless steel 304 grade, including bolt to hinge plate and fixed with screws etc. complete all as specified and directed.
S&F floor door stopper 140 mm long of stainless steel 304 grade, with hard drawn steel spring etc. complete all as specified and directed
S&F drapery curtain rods, stainless steel 30mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 nos.(min) match up rings etc. complete all as specified & directed.
M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement, complete all as specified & directed.
M & L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified & directed.
M&L for cutting chases or making holes in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing , and making good, cutting not exc 10 cm girth complete all as specified & directed.
S&F 20mm outer dia CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F 25mm outer dia CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F 40mm outer dia CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F 50mm outer dia CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F 20mm outer dia CPVC Union complete all as specified and directed.
S&F 25mm outer dia CPVC Union complete all as specified and directed.
S&F 40mm outer dia CPVC Union complete all as specified and directed.
S &F 40mm outer dia CPVC Tank Adaptor complete all as specified and directed.
S&F 25mm outer dia CPVC Tank Adaptor complete all as specified and as directed
S&F 20mm outer dia CPVC Tank Adaptor complete all as specified and as directed.
S&F 50mm outer dia CPVC ball valve/gate valve complete all as specified and as directed
S&F 25mm outer dia CPVC ball valve/gate valve complete all as specified and as directed
S&F 20mm outer dia CPVC Brass Elbow complete all as specified and as directed
S&F 20mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and as directed
S&F 25mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed
S&F 20mm outer dia CPVC Brass Tee complete all as specified and as directed
S&F 25mm outer dia CPVC Brass Elbow complete all as specified and as directed
S&F 25mm outer dia CPVC female Brass Threaded Adapter (FTA/BTA) complete all as specified and as directed
Taking up or down steel tubing 15 mm bore and connection complete all as specified and as directed .
Taking up or down steel tubing 20 mm bore and connection complete all as specified and as directed .
Taking up or down steel tubing 32mm bore and connection complete all as specified and directed.
Taking up or down steel tubing 50mm bore and connection complete all as specified and directed.
Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed..
S&F 500 litre capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.
S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, fixed to walls of 100 mm dia sand cast pipe complete all as specified and directed.
S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, laid in trenches or floors of 100 mm dia sand cast pipe complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 100mm bore including packing under and haunching against sides of pipes after they are laid and tested. complete all as specified and directed.
S & F in repairs 75 mm dia CI (sand cast) soil, waste and vent pipe in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified & directed.
S & F in repairs CI Bends with access door (any radius ), diminishing pieces or tapers of 100 mm dia without oval access door complete all as specified & directed.
S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted with oval access door complete all as specified & directed.
S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted without oval access door complete all as specified & directed.
S & F in repairs Cast iron branch pieces, Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with cement joints, fitted with oval access doors complete all as specified & directed.
S & F in repairs Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore with cement joints, fitted with oval access doors complete all as specified & directed.
S & F 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm complete all as specified & directed.
S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete all as specified & directed.
S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for75mm bore pipes complete all as specified & directed.
Taking down rain water pipe (any size) or pattern including all fittings, head shoes, bends swan necks etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, of 110 mm dia complete all as specified and directed.
S&F for PVC (SWR) bends any radius 110mm dia bore complete all as specified & directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed.
M&L for 15mm thick rendering with ready mix mortar (as per manufacturer's instruction) on fair faces of brick or concrete wall surfaces (internal surfaces) finished even and smooth surface complete all as specified & directed.
M&L for 15mm thick rendering with ready mix mortar (as per manufacturer's instruction) on fair faces of brick or concrete wall surfaces (external surfaces) finished even and smooth surface up to four stories bldg. complete all as specified & directed.
M&L for 10mm thick rendering with ready mix mortar (as per manufacturer's instruction) on fair faces of brick work or concrete surfaces finished even and smooth surface on ceiling complete all as specified & directed.
M&L for preparation and application of two or more coats of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm as per manufacturer's instructions. The paint should also be 100% anti-fungal, damp proof, weather proof over and including water proof wall care putty to achieve even and smooth surface over new plastered surfaces of walls complete all as specified and as directed. Make:- Asian Paint (Apex Ultima Protek)/Berger Paint (Weather Coat long life 10)/ Acro Paint (Acro Guard 3 X) /Dulux Paint (Weather Shield) Elastomeric. Note:- Primer should be compatible with the paint.
M&L for complete removal of existing treatment by mechanical means and applying a coat of water proof wall care putty to achieve even and smooth surface and then applying two coat of 100% anti fungal acrylic emulsion exterior grade whether proof paint over & including one coat of exterior primer complete all as specified and directed. Make: - Asian Paint (Apex Ultima Protek)/Berger Paint (Weather Coat long life 10)/ Acro Paint (Acro Guard)/Dulux Paint (Weather Shield) Elastomeric. Notes: (i) The surface shall be got approved by the GE before application of first coat of paint and then before subsequent coat. (ii) Primer should be compatible with the paint.
M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty to achieve even, uniform and smooth surface complete all as specified & directed.
M&L for complete removal of existing treatment by mechanical means and applying a coat of wall care putty to achieve smooth, even & uniform surface of wall including one coat of primer & two coats of distemper oil emulsion, white or tinted complete all as specified & directed.
M&L for preparation of new plaster surfaces of ceiling applying wall care putty to achieve smooth, even & uniform surface and then application of two coats of oil bond distemper over and including a coat of primer complete all as specified and as directed.
M&L for complete removal of existing treatment by mechanical means and applying wall care putty to achieve smooth, even & uniform surface and then application of two coat of oil bond distemper over and including a coat of primer on ceiling surfaces complete all as specified and directed.
Demolition of brick work built in cement or cement lime mortar complete all as specified & directed.
M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 metre mean radius complete all as specified & directed.
S&F 6 mm thick glass corner shelf (Single shelf) of best quality with CP steel railing of size (250mmx250mm) of best quality complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.
M&L for MS work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.
M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290 Gde-E-165 complete all as specified & directed.
Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified & directed.
M&L Machine pressed pre cast concrete inter locking paver block 60mm thick M-35 grade with grey cement and pigment & glossy finished any shape colour, size laid over dry sand complete all as specified and directed. Note :- Dry Sand shall be measured and paid separately
M&L for sand filling under paver block complete all as specified & directed.
Removing excavated soils to a distance exc. 250m but n.exc 500 metre & depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
S&F in repair plastic water closet seat, white, closed pattern ( seat & cover for Semi Pedestal pattern) with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed.
M&L for Cutting of tree including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg. and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified & directed.
S & F 40mm dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings for over flow pipe of PVC water tank including connection to tank fixed complete to walls, ceilings or in floors etc. complete all as specified & directed.
S & F 40 mm PP-R connection(Tank nipple) for water tank to overflow PP-R pipe 40mm dia complete all as specified & directed.
M & L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperture 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc. of slabs, chajjas, fins, facias, parapets, Lintels, columns and beams etc. complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs. including finishes as existing complete all as specified & directed .
M&L for polymer modified mortar as in patch repairs 25-30 mm total average thickness ( in 2 layers) up to 4th floor level complete all as specified and directed. Notes:- Polymer modified mortar repairs shall be done as per following methodology:- (i) Chipping of plaster and unsound/weak concrete material till reinforcement bars are exposed, which enables their rust removal vide note (ii) below, from slabs, beams, ceiling and columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer-in charge including tapering all edges, making square shoulders of cavities etc. complete and disposal of debris up for all lifts and leads . (ii) ) Rust removal by Providing and applying Reebaklens RR of Fosroc or equivalent from approved makes specified in Appendix ' B' to particular specification, a combination of acid based material, corrosion inhibitors and dispersing agents rust remover, for removal of all rust/ scales/corrosion from reinforcement bars before micro concreting or patch repair, It Shall be applied with brush for complete wetting of rusted metal surface at coverage of 2- 2.5 Sqm/litre & allow it to react for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal /steel for about 5-7 days. Before applying any protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.
(iii) Anticorrosive treatment by Providing and applying Nitozinc Primer of Fosroc or equivalent from approved makes specified in Appendix' B' to particular specification , an epoxy based zinc rich anti corrosive primer having adhesive bond strength ≥ 1.5 MPa as per ASTM D4541, & shall comply to per ASTM B-117 to be applied on well cleaned, fully exposed and all loose scale , rust free surface obtained by grit blasting or suitable means, to be done with coverage @ 4.5sqm / litres to achieve a minimum thickness of 40 microns DFT or as per direction of Engineer-In-charge. (iv) Epoxy bonding for Old concrete & New concrete by providing and applying bond coat on the prepared surface with two component epoxy based bonding coat Nitobond EP of Fosroc or equivalent from approved makes specified in Appendix 'B' to particular specification, having specific gravity 1.15 to 1.2 gm/cc, Compressive strength(BS 6319 Pt.2)- 50 Mpa at 7 days, Flexural strength strength(BS 6319 Pt.3)- 35 Mpa at 7 days, Tensile strength (BS 6319 Pt.7)- 20 Mpa at 7 days, Shear Strength (BS 6319 Pt.4)- 10 Mpa at 7 days, having an over lay time of 6 hrs and 30 ̊C. Bonding agent shall have coverage not less than 2.5sqm/litres. Laying of reinstatement polymer modified mortar or micro concrete shall be completed within the overlay time of bonding coat .
(v) Polymer modified mortar by providing and laying single component, polymer modified, fibre reinforced cementitious repair mortar, Rendroc SP40 or equivalent from approved makes specified in Appendix ' B' to particular specification, over the tacky bond coat, that achieves Compressive strength (BS 1881 Pt.116) > 20 MPa at 1 day , > 45 Mpa at 28 days, Tensile Strength >2.5 MPa, Flexural Strength > 7Mpa at 28 days, Finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs, piles etc., , complete in all aspect as per manufacture's methodology. (vi) Work shall be completed only after proper wet curing has been done by contractor and surface has been evaluated for satisfactory quality by sounding/tapping with a blunt metal instrument, and testing of Polymer modified mortar cubes filled up and cured by contractor during the application of Polymer modified mortar (75mm size cube crushing strength at the end of 28-day to be not less than 45 N/sqmm) in addition to NDT Testing . (vii) Unit rates quoted for Polymer modified mortar 25-30 mm is inclusive of all materials, labour, tools and plants, propping, scaffolding, safety arrangement, quality control, testing etc. and all items of works included in notes (i) to (vi) above complete in all respect, as per specifications and as directed .
Demolition of RCC of any description, in any position roofs, floors (other than ground floors), beams staircases, landing, chajjas, RCC overhead tank and similar suspended work and Removing excavated material /demolition material exc. 1.50 km but n exc.5 km including taking down from upto four storey complete all as specified and directed.
M&L for use & waste of form work to chajjas and similar items including edges finished rough complete all as specified and directed.
M&L for RCC 1 : 2 : 4 type B1 using 20mm graded stone aggregate as in chajjas complete all as specified and directed.
M&L for MS TMT bar 10mm dia & over as in reinforcement cut to length bent to shape required including cranking, bending, binding with MS wire(annealed) not less than 0.90mm dia complete all as specified and directed.
M&L for MS TMT bar 8 mm dia as in reinforcement cut to length bent to shape required including cranking, bending, binding with MS wire(annealed) not less than 0.90mm dia complete all as specified and directed.
M & L for RCC 1 : 1½ : 3 type A1 (using 20mm graded stone aggregate) as in roof slab supported on wall / beam complete all as specified and directed.
M&L for use & waste of form work to soffits of suspended slab such as roof slab and similar work not exc 200mm thick finished rough complete all as specified and directed.
M&L for use & waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed.
M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete surfaces of chajjas & slab as on ceiling surfaces finished even and smooth without using extra cement complete all as specified & directed.
M&L for cutting holes into or through one brick thick brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required superficial area exc 400 Sqcm but n.exc 0.10 Sqm round shape for exhaust fan etc. complete all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Taking down carefully the old unserviceable Aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, pendants, sockets, regulators, etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete all as specified and directed.
M&L for following point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & including concealed rigid PVC conduit and including replacement of existing sunken terminal boxes with modular sunken terminal box 2mm thick of required size and modular white cover plate with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface complete all as specified and directed . Note :- 1. The Rate is inclusive cutting/chasing and making good disturbed surface with cement mortar 1:3 and same surface finishes with the adjoining surface of disturbed area . 2. At roof slab conduit wiring will be done through New PVC rigid surface conduit .
One light /fan/Bell point/security light controlled by one way switch
One 3 pin socket outlet 5 amps on same board
One 3 pin socket outlet 5 amps point on independent board
M&L for point wiring for one 3 pin socket outlet, 15 amps on independent board with stranded copper conductor 2.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & including concealed rigid PVC conduit and including replacement of existing sunken terminal boxes with modular sunken terminal box 2mm thick of required size and modular white cover plate with all accessories including 2.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface complete all as specified and directed . . Note :- The Rate is inclusive cutting/chasing and making good disturbed surface with cement mortar 1:3 and same surface finishes with the adjoining surface of disturbed area .
M&L for point wiring for one 3 pin socket outlet, 20 amps on independent board with stranded copper conductor 4.0 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & including concealed rigid PVC conduit and including modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 4.0 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface complete all as specified and directed . . Note :- The Rate is inclusive cutting/chasing and making good disturbed surface with cement mortar 1:3 and same surface finishes with the adjoining surface of disturbed area .
S&F of Switch modular type, 1Module, 6 Amps, one way complete all as specified and directed . Make – Model Crabtree of Havells , Model – Unica of Schneider / Model Marius of Legrand
S&F of Socket outlet modular type 2M, 3 pin, 6 Amp complete all as specified and directed . Make – Model Crabtree of Havells , Model – Unica of Schneider / Model Marius of Legrand
S&F in Socket outlet modular type 2M, 3 pin, 16 Amp complete all as specified and directed . Make – Model Crabtree of Havells , Model – Unica of Schneider / Model Marius of Legrand
S&F of Switch modular type 1M, 16 Amp with red indication light complete all as specified and directed . Make – Model Crabtree of Havells , Model – Unica of Schneider / Model Marius of Legrand
S&F Modular MCB SP 20 Amp 1 M for AC connection complete all as specified and as directed.
S&F Modular socket outlet 20 Amp 2M for AC connection complete all as specified and as directed.
S&F of electric bell ding dong AC, 230 volts single phase complete all as specified and directed .
S&F of Bell push modular type 1M 5/6 Amp complete all as specified and directed . Make – Model Crabtree of Havells , Model – Unica of Schneider / Model Marius of Legrand
S&F in replacement of Wall mounted LED Integrated Batten T5 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED batten-Integrated complete all as specified and directed . Make Bajaj Cat Part No-BCLAB 20W WH LED P/ Crompton Cat Part No- LDL-20-CDL / Wipro Cat Part No-LL20-281-XXX-65AL1.
S&F in replacement of Wall mounted LED Integrated Batten T5 10 Watt-2 Ft White, indoor decorative PVC extruded T5 LED batten -integrated type complete all as specified and directed. Make- Bajaj Cat Part No-BCLSB10 WH / Crompton Cat Part No-LCTLN-10-CDL / Havells Cat Part No-ENDURALINEARNEOBS10WLED865SPCWH.
Supply fix batten holder PVC insulated body complete all as specified and directed .
S&F Inverter LED lamp 12 Watt rechargeable emergency LED bulb for home, cool daylight, Base 22 complete all as specified and directed.
S&F of Electronic fan regulator, modular type 2M, 8 steps, complete all as specified and directed by Engineer in Charge. Make – Model Crabtree of Havells , Model – Unica of Schneider / Model Marius of Legrand
Taking down of ceiling fan and keeping in safe custody and refixing it back after completion of B/R repair work complete all as specified and directed at site.
Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos. Blade, 30 cm long down road, 2 Nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply including taking down old ceiling fan and depositing to MES store yard complete all as specified and directed . Make : Orient Model – Hector/Havells-Efficiencia Neo/Bajaj- Energos 28
S&F in replacement decorative wall light mounting suitable for LED lamp upto 12 Watt including all connections complete all as specified & directed. Make :- Havells Cat Part No –LHF0E1TZ10014/ Halonix Cat Part – HLWB-01-B22/Philips model – Comet.
S&F in replacement of LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified & directed. Make- Havells Cat Part No – HEXAFT10WLED857SSYMBOPC / Crompton Cat Part No- LBHE-10-CDL / Wipro - Garnet
Taking down of exhaust fan and keeping in safe custody and refixing it back after completion of B/R repair work complete all as specified and directed .
S&F of polycarbonate ceiling rose surfaces minimum size 65x50mm with two/ three terminals complete all as specified and directed .
Supply & fixing water storage heater 25 litre capacity, 5 Star rated , vertical type, metal body, glass line, AC, Single Phase electric, 230 Volt, complete with heating element, thermostat, 3 core lead, plug top, safety valve, non-Return Valve, temperature indicator including two nos. of PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, braided with stainless steel wire , suitable for hot and cold for water connection with suitable nut, bolts & washers , making electric connection and making good to disturbed surface complete all as specified and directed.
Taking down Electric/Electronic KWH meter and refixing it back after Sub main wiring and connecting up complete all as specified & directed.
S&F in replacement Sheet metal enclosure of size 350 x 300 x 150 mm suitable for mounting Single phase electric meter fabricated from 2mm thick CRCA sheet with anti corrosive dust and vermin proof complete all as specified & directed. Note:- The meter cover shall have a fully transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover.
Supply & Fixing in replacement of sheet metal enclosure V TPN 4 way MCCB 125A, 4P, Double door DB, IP-54, bus bar, neutral link earth bar and din rail complete all as specified and directed.
Supply & Fixing in replacement of on distribution board MCCB 125 Amps, 4 Pole, 415 Volts with 16 kA including electrical connection with bus bar or incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed .
Supply and fix in replacement of MCB DB SPN 8 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed .
M&L in replacement MCB SPN 'C' curve 63 Amps 240 Volts , 10 KA complete all as specified and directed
M&L in replacement MCB SP 'C' curve 06 to 32 Amps 240 Volts complete all as specified and directed .
M&L in replacement MCB SP 'C' curve 40 Amps 240 Volts complete all as specified and directed .
S&F in replacement of LED Building security light fitting 30 Watt including fabrication of GI bracket 25mm dia medium grade suitable for fixing of LED light fitting duly fixed with clamps, nut, bolts, & washers etc. and all as directed. Make – Crompton Cat Part No-LSTS-30-CDL-M / Havells Cat part No-ENDURAPEARLSL30WLED757SASYTOPCMP / Bajaj Cat Part No – BCLST30W LED
M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete all as specified & directed.
M&L for sub main wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn in & including new PVC rigid concealed conduit complete all as specified and directed . Note :- (i) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (ii) Two runs of cable for phase & neutral , one run of cable for earth & one run of PVC conduit will be measured and paid as one unit length. (iii) The rates are inclusive of Cutting / chasing and making good to disturbed surface with cement mortar 1: 3 and same surface finishes with the adjoining surface of disturbed area .
M &L for taking out LT cable 3.5 core upto 50 Sqmm size of cable from the cable loop and making connection to VTPN DB with suitable size of thimbles including necessary excavation & returning filing in and 40mm dia light grade GI protection pipe upto 50 cm length complete all as specified and directed.
VED PRAKASH ARORA
JYOTI ENTERPRISES
M/s. Kansal Construction Co.
A R construction
M/S Chhavi Constructions Co
SHREE RAM BUILD TECH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .