Dental examination chairs Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 3 Year (s) Dental Examination Chairs ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Chair Unit Specifications Dental Chair design: Should enable the operator to be in close proximity of the patient to provide optimum vision of the operating field and safe control of all component devices. * Ergonomics The chair should be designed to provide good ergonomics for both operator and assistant. Chair should have adjustable ergonomic headrest. * Power drive for Chair movements: Dental Chair shall be fully motorized

Dental examination chairs Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 3 Year (s) Dental Examination Chairs ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Chair Unit Specifications Dental Chair design: Should enable the operator to be in close proximity of the patient to provide optimum vision of the operating field and safe control of all component devices. * Ergonomics The chair should be designed to provide good ergonomics for both operator and assistant. Chair should have adjustable ergonomic headrest. * Power drive for Chair movements: Dental Chair shall be fully motorized

pneumatically electrically driven

which gives smooth * 1/8 movement and non- jerky start and stop. Power Input: 220 – 240 V AC

50 Hz * Power Supply: Should have integrated power supply for fiber optic handpieces

piezo electric motor etc. * Type of Motor: Noiseless DC Motor for enabling chair movements. * Dental Chair Base: Cast-metal/alloy base with five title castors. * Corrosion resistance: Base and other structure of the Chair should have a corrosion resistant coating. * Concealed inlet & outlet: All the outlet & inlet for the services to the chair shall be concealed in the box. The Box as an infection control measure shall be located at the foot area of the chair or within the unit. * Valves: Provision of Built-in anti- retraction valves and flush valve system for infection control. * Usable storable height (minimum) 840 mm * Width 450 mm to 500 mm * Length (minimum) 1830 mm( 6 feet) * Dental Chair Height Parameters Dental Chair height adjustment: By electronically controlled electric motor * Lowest height of Dental Chair: between 300 – 450 mm * Height adjustment range: between 400 – 700 mm. * Height range: between 500 – 800 mm * Dental Chair Features & Sub Systems Lumber Support: The Chair shall have two way adjustable lumbar support. * Backrest of Chair: The backrest of the dental chair shall be ultra thin

flexible

highly comfortable

seamless long life * 2/8 upholstery and should disinfectible. Torso support: Height adjustable torso support with Height adjustable foot ring * Chair movement control: By Finger tip panel and also by user friendly foot control

with all the functions. It should at least two patient entry programs

1- rinse

2- exit * Toe movement facility: Facility of Toe movement. Toe should move up while backrest moves down. * Safety brake: Safety brake provision while going down for patient exit position. * Overhead Delivery System The over head delivery system shall have balanced flax arms with pneumatic bracket. It shall have at least Five (5) delivery ports for various hand pieces

scalar and 3-way syringe(with autoclavable tip)

(with 6 spare tips). * Air Rotor terminals The Dental Chair shall have minimum two high Speed Air Rotor terminals with water control on coupling with at least one fiber optic terminal. Should have one Air motor terminal with speed control preferably fibre optic

with speed range of 300 – 40000 RPM in standard mode with cutting power in the range between 50 – 70 watt. Should be provided with the Brushless. * Ultrasonic Scaler: one unit of in-built Piezon LED Ultrasonic Scaler (frequency 28-36 KHz) with 4 scaler tips and one set of perio-curette tips. * 3/8 Hand piece control block: Hand piece control block with flow through water design to eliminate stagnant water: * Water Syringe: Autoclavable quick disconnect water syringe * Vacuum Suction: Provision of high vacuum suction unit on the assistant side of the dental chair

Medium vacuum suction and 3 way syringe. * Hand pieces to be supplied with Dental Chair unit: "Hand pieces (all European CE/US FAD Certified Genuine instruments): Fibre Optic Air Rotor(scratch resistant

Titanium Body) - 1 No.

Fibre Optic Micro-motor straight (scratch resistant

Fibre Optic Miniature Air Motor hand piece - 1 No.” * Dental Camera System: Hi resolution LED Dental Camera system with digital signal processor along with ≥ 15” LCD Monitor mounted on the Dental chair. * Movable cuspidor box and Movable assistant control system shall have: "(i) Saliva ejector (ii) Autoclavable High volume evacuator (iii) Autoclavable 3-way syringe (iv) High quality stain proof vitreous China bowl with adjustable cup full and bowl rinse timers (v) Clean water bottle system. * Dental Chair Illumination Specifications Light Source: Latest sensor operated Non touch (On/Off) LED Light

with luminosity of minimum 30000 to 40000 lux with maximum degree of rotation of light arm * 4/8 movements. With three position intensity with high

medium and composite settings. LED type: LED light 5000 K cool light or similar high quality light. * Light Head with Axial movements: Horizontal

Vertical

Axial & Diagonal adjustment. * Air Compressor Air Compressor Unit: Dental Chair shall be supplied with suitable oil free

noise free Air Compressor

with capacity to run up to three dental chair units simultaneously. Dental Chair shall be supplied with suitable oil free

with capacity to run up to three dental chair units simultaneously. Storage & Operating Conditions Storage Conditions: Dental Chair unit is capable of being stored continuously in ambient temperatures of 0 – 50 degree centigrade and relative humidity of 15 – 90% * Operating Temperature & Relative Humidity: Dental Chair unit is capable of operating continuously in ambient temperatures of 10-45 degree centigrade and relative humidity of 15-90% * Certifications Certifications (proof to be produced by Seller on Buyer’s demand) CE – European US FDA

CE – European Manufacturer’s ISO certification for quality standards; If the Manufacturer have ISO certification for quality standards (proof to be produced by Seller on Buyer’s demand): true true

false Electrical safety conforms standards for electrical safetyI EC60601-1(OREQUIV ALENT international national standard) General requirement for Electrical safety true true

false 5/8 of Medical Equipment (proof to be produced by Seller on Buyer’s demand): Turnkey Work & Accessories Scope of Installation: Installation of dental chair unit as per scope defined at tnc Installation of dental chair unit as per scope defined at tnc

Installation of dental chair & development of operator’s work area [12 feet x 12 feet area per dental chair unit] as per scope defined at tnc (or higher) Accessories (to be supplied with each Dental Chair unit): As per OEM list and one unit of X-Ray viewer (LED Based) * Documentation User/Technical Maintenance manuals to be supplied in English YES * Certificate of calibration and inspection YES * List of important spare parts and accessories with their part number and costing

List of Equipment available for providing calibration and routine Preventive Maintenance Support

as per manufacturer documentation in service/technical manual: YES * Log book with instructions for daily

weekly

monthly and quarterly maintenance checklist

the job description of the hospital technician and company service engineer should be clearly spelt out YES * Warranty & CMC Warranty Period 5 5 (or higher) Whether Seller agrees to enter in to Comprehensive true true

false 6/8 Maintenance Contract (CMC) with the Buyer at the expiry of warranty period as per mutually agreed rate between buyer and Seller? If Servo Voltage Stabliser of appropriate ratings meeting ISS specifications (input: 160-260 volt) and output 220-240 V

50 Hz offered to be supplied with offered Dental Chair unit true true

false * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Kumar Mittal 110015

Acharyashree Bhikshu Govt. Hospital

Moti Nagar

New Delhi 2 15