Annual Civil Repair Works at Jantar-Mantar and Isarlat, Jaipur

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

(a) 110 mm dia(S-3/3.16.3)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)

25 mm nominal size

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on old work

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :

(a) (-do-) 25mm nominal bore.

(b) (-do-) 40mm nominal bore.

Carriage of Building Rubbish Stone metal (Grit and ballast etc.) For 10 Km. Lead.

Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work.

Providing and fixing double scaffolding system on the exterior side, upto five story made with 4" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding. Note : This item to be used for maintence work judically(B-13/13.22)

Supply of Labour as per requirment with required Tools & plants

(a) Mason (for plain stone work) 2nd class(Code no.125)

(b) Beldar(Code no.114)

(c) Fitter (grade 1)(Code no.116)

(e) Carpenter 1st class(Code no.111)

Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 ,fixed over aluminium sheeting, 2mm thick with area exceeding 0.9sqm supported on mild steel angle iron posts 75mmx75mmx6mm,2Nos.firmly fixed to the ground by means of properly designed foundation with M-15grade cement concrete450mmx450mmx600mm,600mm below ground level as per approved drawing and MoRTH Specification Clause 801RUIDP Road BSR 10.4(i)

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- B Based on RUIDP SOR 2023 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

P & L Lime Surkhi Plaster lime surkhi mortar 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in specified course for base coarse and subsequent course & Loi, tamping, beating, curing till the shrinkage cracks are disappear. The work is to be done with all lead as the work is of restoration nature as per Jaipur practice including adding gur, methi & gugal on old walls including removal of all old loose and decade plaster, each coat to be done after 3 days of previous coat. 33 mm thick in four coats (40.5.1)

Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually on lime base, on ceiling and all flat surface in two coats. First coat applying 3 mm to 4 mm thick and curing properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice.(thickness not more than 6 mm.(40.19)

Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150 mm thick as per specifications. Including dismantling of old deteriorated roofing(40.29)

Chemical treatment of araish surface to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of gaps & cracks and application of preservative coating to prevent algal growth and make the surface water proof.(40.45)

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured, Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing.(40.17)

Chemical treatment of sand stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks/ joining of gaps/ pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent algal growth and make the stone water proof.(40.43)

Flush and ruled pointing over joints of dressed stone cladding, chajjas, jali etc. including racking the joints as per traditional practice including all leads and lifts with grinded mortar of lime putty and surkhi mixed in 1:2 ratio and gur, methi, gugal etc. are to be mixed as per traditional practice.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART "C" BASED ON NON BSR (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing applying two or more coat of linseed oil of approved brand and manufacture to give an even shade on existing old wooden doors/windows

Providing and fixing embossed stone signages of Size 1'X1'6",30 mm thick made out of Bansi Pharpur stone including engraving the writing matter and filling the matter with black ink complete as per direction of Engineer In charge

Supply and Installation of Que Manager of height 750 mm made out of 40 mm dia M.S. hollow pipe embeded in stone flooring in lime concrete. The M.S. pipe shall have provision for fixing chain on two directions. The top of pipe shall be rounded. The pipe shall have a 5 ft. long iron chain of 10 mm dia including painting complete in all respect as per direction of Engineer Incharge.

Supply and Fixing of office wooden rack Size(36"X30"X16") with partition including Paint ,primer,all fittings complete as per direction of Engineer in charge

Providing and Fixing wooden Almerah/Cabinets made out of 19 mm thick 1st marked block board and 1.00 mm thick lamination over block board (all visible sides) including all required hardware, fittings, duco paint/melamine polishing, beading etc. complete as per approved design, drawing and direction of Engineer incharge. (Front area shall be measured).

Providing & Fixing12mm thick toughened clear front glass panels of saint gobin, modi or equivalent make fixed on wall or any other surface by means of S.S. fitting of approved make, size and design as per specification and direction of Engineer Incharger complete incl all transportations.

Showcase and Pedastal repairing and Duco paint work complete in all respect. as per instruction by the authority. All work shall be done as per specifications and satisfaction of authority.

Providing and Fixing fine dressed sand stone /approved stone "Chajja" for palaces,chattries,forts and jharokas with fine dressed surface both sides and front edges should be round shape/moulding, fixing in grinded lime surkhi mortar 1:2 joint flush with proper adhesive with pigment to match the shade of stone (thickness of chajja on front edge 50mm and 75mm on fixing end) exposed surface is to be measured only.

Providing and fixing fine dressed 35mm to 40mm thick " flooring " with white/light pink sand stone (machine grinded surface) machine cut of approved shade set in pattern over 30mm thick base of lime surkhi mortar 1:2 including jointing finished flush with lime putty and stone powder with an admixture of pigment complete in all respect.

Refixing of Existing wooden doors and windows including repair and replacement of damaged wooden members required fitting,hinges ,chool etc.and providing and fixing new stone frames/old frames if required complete as per direction of Engineer in charge

Engraving of letters deep 5 to 10 mm thick i/c filling of black colour as specified on the stone plates

Letter sizes upto 1"

Letter sizes above 1" and upto 2"

Letter sizes above 3" and upto 5"

Deduct for khameera work if kangoora/design/lining work not done.

Please Enable Macros to View BoQ information