GE S U 09 2022 23 PROVN OF STORE SHELTER ALLIED WORKS AND SPECIAL REPAIR TO DAMAGED SECURITY WALL AND DRAINAGE UNDER GE SOUTH UDHAMPUR

Amount

Surface excavation (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide & not exceeding 1.5 m in depth for foundations etc and getting out as in hard/dense soil complete all as specified and as directed.

PCC (1:4:8) type D-2 ( using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and as directed.

Brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius in CM 1:6 as in brick work/brick pillars etc. complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil material n.exc 50m and depositing where directed at a level n.exc. 1.5m above the base in soil complete all as specified and as directed.

Roof trusses (framed), purlins, crane gantries rails and fastenings and heavy brackets, post, eves board including frame work and similar work framing (beam, tee, channel or flat sections) including distance pieces cleats including welding etc. complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick crimpted/tapered at the external end slope of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and as directed.

Plain galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges, hips, valley gutters at the external end slope of any colour having tansile strength 550 Mpa as in roof(ridges) covering fixed with self tapping screws and caps etc complete all as specified and as directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc complete all as specified and as directed.

Formwork to flat sides and soffits of roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams complete all as specified and as directed.

TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per srl item No. 13 above but 5mm dia and over including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured separtely).

Supply only Liquid water proofing compound complete all as specified and as directed.

75 mm thick cement concrete (1:4:8) type D-2 as in sub base to floor complete all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and as directed.

Roughening surfaces of old cement concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. complete all as specified and as directed.

Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Backing coat 10mm thick in cement mortar 1:3 to receive tiles in vertical surfaces complete all as specified and as directed.

Vitrified coloured dark shade ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per srl item No 23 but in skirting/dado complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe including rubbing and mirror polishing complete all as specified and as directed.

Dura stone tiles of size 305mm x 305mm x 10 mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and as directed. Note :Shade/colour as approved by GE)

Hardcore of broken stone or boulders of gauge not exc 63mm and deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

4mm thick AC board (designer ceiling) of size 600mm x 600mm panel confirming to IS 14862 type B category three including GI frame work with size of grid 605 mm x 605mm for seamless ceiling comprises of GI perimeter including all accessories complete all as specified and as directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Preparation of newly plastered surfaces of walls applying two coats of oil bound distamper over one coat of chalk whitening of desired finish complete all as specified and as directed.

Applying one coat of birla white wall care putty on newly plastered wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts and trading oil and greasy spot complete all as specified and as directed.

Mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 quality A incl one shop coat of zinc chromate primer paint incl preparation of surfaces at contractor's workshop before fabrication complete all as specified and as directed.

4 mm thick glass sheet of ordinary quality n exc 0.5 Sqm in each pane complete all as specified and as directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete all as specified and as directed.

Aluminium body heavy duty double action floor spring of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel, suitable for glass shutter at both side rotable complete all as specified and as directed.

Powder coated Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.

Powder coated aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. including all fittings complete all as specified and as directed.

Powder coated aluminium anodised window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. including all fittings complete all as specified and as directed.

12 mm thick prelaminated particle board, exterior grade both side laminated fixed to aluminium frame work complete all as specified and as directed.

Aluminum handles cast type, anodised, 150 mm size complete all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

Pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and fixed complete all as specified and as directed.

35mm thick plain framed 2nd class hard wood panelled factory made shutters (two panel) with lock rail and panel of 9mm thick BWP commercial ply with size of rail and stiles as per IS 1003 (part-1) kin seasoned and chemically pressure treated complete all as specified and as directed.

Aluminum alloy powder coated sliding door bolt 300 mm long and not less than 12mm dia with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

MS flat iron as in wind ties etc confirming to Fe 410-0 or Fe 310-0 including clamps complete all as specified and as directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and as directed.

PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drains including necessary formwork and extra forming fair finsished drain or channels for inner girth in cement concrete etc complete all as specified and as directed.

Reinforced concrete pipes, class NP-3 laid and jointed complete with collars, bore of pipe 450mm complete all as specified and as directed.

Reinforced concrete pipes, class NP-3 laid and jointed complete with collars, bore of pipe 600mm complete all as specified and as directed.

Providing cement concrete (1:2:4) type B-1 (using 12.50mm graded crushed stone aggregates) as in coping including necessary form work complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick/concrete surfaces of walls in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement cocrete, using extra cement including forms, moulds mitred/stopped ends complete all as specified and as directed. (inner girth only measured).

Rendering 15mm thick on stone masonary surfaces or other than fair face of brick work of walls in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and as directed.

Pre-cast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregates) as in cover slab for drainage etc.and set in cm 1:6 complete all as specified and as directed.

Mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking bending etc complete all as specified and as directed.

De-silting of deposited earth, silt, mud, stone, wood or any unwanted materials inside existing drain by excavating and removing to a distance not exc. 50 Mtrs from the site and depositing where directed complete all as specified and as directed.

Walling of random rubble uncoursed well bonded bedded and solidly hearted built in cement mortar (1:4) complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of randon rubble walling, uncoursed or brought upto courses granite or trap stone 40mm complete all as specified and as directed.

Punched tape concertina coil (including spike and handle) with 50 turns and 1050 mm dia, width of barbed 9 mm and spacing of clips 23.5 mm to 24.5 mm c/c weight of coil will be 10 to 14 kg without packing. Coil length will be 6m when opened up etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling old serviceable/unserviceable barbed wire including removing of unserviceable barbed wire from site and serviceable materials kept in safe custody for re-use complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete surfaces of walls including raking out joints, hacking for key, scrubbing down with water etc, including removing the rubbish/debries outside MoD land complete all as specified and as directed.

Demolition of PCC solid block masonry, built in cement mortar including all quoins, arches, pillars, etc to embedding fencing posts complete all as specified and as directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifiecally provided for complete all as specified and as directed.

Cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregates) as in bed blocks, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including form work complete all as specified and as directed.

RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in beams, posts, lintels complete all as specified and as directed.

Mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. complete all as specified and as directed.

S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed. (Note :- Each line wire to be mesured)

Fixing only galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed. (Note - Each line wire to be mesured)

Two coats cement base paint on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

Bush cutting/jungle clearance including removing the debris to near by low laying areas complete all as specified and as directed.

110 mm dia PVC (SWR) pipes single socketed in any length as in weep holes of retaining wall complete all as specified and as directed.

Point wiring for one light point /fan point/ bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit ( ISI marked ) with and all accessories 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3mm thick hylam brand bakelite sheet cover for fixing of piano switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLS 1.5sqmm multi stranded copper conductor cable (green color) as earth lead, & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and as directed.

All as per description of Ser Item No.79 here-in-before but for one 3 pin 5 Amp socket outlet point controlled by one push button on same board complete all as specified and as directed.

All as per srl item No.79 here-in-before but for one 3 pin 5 Amp socket outlet point controlled by one push button on independent board complete all as specified and as directed.

All as per srl item No.79 here-in-before but for one 3 pin 15A socket outlet on independent Board with PVC insulated unsheathed FRLS cable 4 sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLS 2.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly complete all as specified and as directed.

Switch piano flush button single pole one way 5 amps 240 volt complete all as specified and as directed.

Socket outlet 2 in 1, 3 pin, 5A, 240 Volt complete all as specified and as directed.

Switch socket combination 5 Amps 2-in-1, 5 Pin flush type, 230 volts complete all as specified and as directed.

Switch socket combination 5 pin 16 Amp, flush type complete all as specified and as directed.

Ceiling rose surface bakelite 3 terminals complete all as specified and as directed. Make : Cona Cat Part No 2126/SSK cat part No 572 or equivalent of make in Havells/Anchor.

Fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically complete all as specified and as directed.

LED tube light fitting Garnet 20W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and as directed. Make- Wipro, Product code- D532065, Or Equivalent make in C&S/ Havells

LED Street light 30W including angle arms (Bracket) with 25mm dia GI pipe. Make-Havells Cat Part No- ENDURACITYLITEPLATPLUS30WLED757SASYBOPC or equivalent to Crompton/ Syska complete all as specified and as directed.

Supply and fixing high speed 5 star rated AC ceiling fan 1200mm sweep 230 volt single phase with all fixing accessories including providing the suitable size of fan hook as per site requirement complete and hanging the same position along with all electrical wire connection complete all as specified and as directed. Make- Havells (Efficiencia Neo (BLDC 26 W) ) or equivalent make in Bajaj/ Crompton

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

MCB Single Pole, 230 Volt, Raiting 6 to 32 Amps Cat Part No : 811015 complete all as specified and as directed.

MCB Single Pole and Neutral , 230 Volt, Raiting 6-40A of make Indoasian, Cat Part No : 811034 complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4.0 Sq mm as earth lead complete all as specified and as directed including taking down old sub main wire.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5Sq mm as earth lead complete all as specified and as directed. (For AC point)

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.30 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point complete all as specified and as directed and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs.

BHAGWATI TRADERS

V K CONSTRUCTION CO

SINGH CONST CO

VISHWANATH AND SONS

KALSOTRA CONSTRUCTION CO

R K BUILDERS

PARDEEP SHARMA