GE/TOKEN-100/2025-26

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation filling, mass concrete of manholes, posts etc complete all as specified.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.

Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed.

M&L cement concrete 1:3:6 type C 2 (20mm graded stone aggregate) as in sub base, hard standing of 75mm thick, complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:4 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) finished even and fair etc complete all as specified and directed.

M&L Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 to 2mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth Exterior Paint of required shade : New work (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm) complete all as specified as directed by Engr-in-Charge.

S & F for ventilator outer frame 40mmx40mm with 1.3mm thickness, corner 45degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/ 300x200xx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M & L Cement concrete type B-2 1:3:6 (40 mm graded stone aggregate) as in plinth protection, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like including bonding agent , complete all as specified

M&L form work to roof slab, chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, etc. complete all as specified and directed.

Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 finished even and smooth without using extra cement complete all as specified.

M/L for 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels to 2mm thick with Single Side Prelam PVC sheet duly fitted into the wall as per specifications complete.

Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified.

Supply only Mild steel in flat, round or square bars, in available lengths Fe 450 W (Gde E-250 quality A)

S&F in MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165 comple all as specified and directed.

S&F Chain link MS galvanisd fencing, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. incl provission of binding wire any size or type complete all as specified and directed.

S&F Mild steel screw bolts (machine made) any dia size with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and directed.

S & F stainless steel wire cloth (SS304 grade) 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples with wooden/aluminium beads/screws to window/door complete

M & L two coat with distemper oil emulsion over a coat of primer on new plastered surface on wall all as specified and directed.

M & L Vetrified ceremic light colour tiles 10 mm thick (squire/rectangular) polished area of each tiles n' exc 0.36 sqm in floors over 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slullry and pointed in white or coloured cement to match complete all as spd and directed

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F plates (plain or chequered)channels squares cut or notching attached to beam or tee confirming to Fe.410.Gde-E-250 complete all as specified and as directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge

M&L Hardcore of broken stone of gauge n. exc 63mm deposited, spread and levelled in layers not exc 100 mm thick watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC (1:4:8) Type D2 (using 40mm graded crushed stone aggregate) as in sub floor complete all as specified and directed

Sand filling under floors or in foundations including watering and consolidations complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

Cutting channels, grooves or rebates n exc 15 cm girth, and trimming surface with reiforcement

M & L Cement concrete type C2 1:3:6 (40 mm graded stone aggregate) as in sub base, 100 mm thick complete all as specified and directed.

S&F 100mm long, extruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.

S&F in Soft closing ball bearing telescopic channel of size 20 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs

“S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all spd and di

rected by Engr in charge

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) by using diamond saw blade cutting machine without damaging adjacent RCC structures not otherwise including removal of rubbish outside complex ( MOD land), complete all as specified.

S&F 150mm long stainless steel barrel tower bolt of extruded section, complete all as specified.

Taking up or down 15 mm dia GI tubing and connections complete all as specified.

S&F in repair fancy type 15mm dia chromium plated quarter turn fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as directed. Make Jaquar FLR5309N ,CERA F1003501,Hindware F570027

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m

S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes of cement plaster 1:6 complete all as specified and directed.

S&F Roof trusses (framed), truss, framed brackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge

S & F Brass CP health faucet hand shower type with 8mm dia 1.2 Meter long Flexible Tube and Wall Hook screwed for iron pipe fancy type long body all as specified and directed.

S&F in repairs vitreous chinaware coloured wall hung wash hand basin with full pedestal of size 550mm x 400mm complete including , CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.

S&F in repair fancy type brass chromium plated soap dish, complete all as specified.

S&F in repair CP grating 125mm dia, complete all as specified.

S&F in repair aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.

S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .Make: Cardin or Equivalent

Cleaning and drying the brick surfaces, and make it dust free. Prewetting the surface with water before application of Dampblock 2k, and then applying a skim coat of polymerised putty and after drying 2 coats of Smartcare dumpblock 2K @1.5 Kg/ Sqm. (Application of plaster shall be measured and paid in appropriate item).

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :Make of Wire : Gloster/Havells/ Polycab/Finolex (Premium)

All as per Item No 122 above but one 3 pin socket outlet 5 hole 5 Amp independent board , socket & switches to be measured and paid separately.

Point

All as per item No 122 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

ITEM NO-122.04

All as per item No 122 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15/16 A socket outlet point on independent board complete all as specified and directed by Engineer in charge.

One power point with insulated stranded copper conductor cable 4 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

M&L switch piano flush type 6 Amp SP one way ISI marked complete all as specified.

M&L socket outlet flush type 6 Amp SP one way ISI marked complete all as specified.

M&L switch piano flush type 16 Amp SP one way ISI marked complete all as specified.

M&L socket outlet 2 in 1,3 pin 6/16 Amps ISI marked complete all as specified.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

M&L MCB SPN 40 Amp "B " curve all as specified.

M&L MCB SP 6 to 32 Amp "B" curve all as specified.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. Sys

tem level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete

S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

S&F in GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 25 mm dia complete for protection of LT UG cable all as specified and directed. Make-Jindal/ Hindustan/ TATA

Supplying laying sand cushioning for cable protection in trenches 8 cm thick layer before laying cable and 15 cm thick layer over the cable including well punning complete all as specified and directed.

Supplying only sub class ‘B’ bricks old size (23 x 11.5 x 7.5) CM with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L for switch Modular type 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge.

M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified.

M&L bell electric (ding dong) 230 volt, SP all as specified and directed.

S&F of modular AC Box consisting of 20 Amp multipower socket including MCB of capacity 25 Amp mini MCB, ‘C’ curve, single phase 240 V, AC including modular box, frame, cover plate including plug top with indicator complete all as specified and directed .

Supply and fix loop in /loop out box of suitable size PVC moulded terminal box with locking arrangement comprising of one 4 way conncetor all as specified and directed

Supply and fixing Garden light of integral decorative with white Dome type of height 0.6 meter with suitable for single phase 230 volts 50 HZ AC Supply including LED bulb for Dome WHITE , Poles/GI Pipe of height 0.6 meter and painted, making foundation for garden light size 250mmx250mmx400mm cement work complete all as specified and directed .

Supply & fix LED Post Top latern lights ,25W ,single phase with decorative LED post top latern lights luminaire with diffuser and painted spun aluminium deflector pre wired and provision of twin core flexible wire,copper conductor of 0.5 Sqmm from light fitting to loop in box complete all as specified and as directed.

S&F MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete Note:-(i) MCB shall be measured & paid separately (ii) make of DBs & MCB should be same

S&F MCB SPN 40 to 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply,laying PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 6 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete.

Schedule of Credit