Gram Sabha sikhadi me bhumihar basti me rajbhar basti hote hue yadav basti tak CC road ka nirman karya

Earth work filling on road By cartege up to 3 km distance I/C all material labour T&P proper complition to the work . As per Analysis

Excevation in foundation in mixed soil I/C filling lift up to 1.50 m & lead up to 30 m & also I/C filling, watering & ramming of excavated earth into the trenches etc. complete of work.

Concrete with 4cm. Gauge Stone ballast, coarse sand and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials labour and tools and plants etc. required for proper completion for the work

Providing, laying, spreading and compacting GSB grading I material 53-9.5 mm Stone Ballast I/C spreading in uniform thickness, hand packing, etc. complete of work.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

M-150 Class B/W in 1:4 cement & C/S mortar in foundation and plinth I/C S/O all materials labour, T&P etc complete of work.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501

12mm thick plaster with 1:4 cement & C/S mortor thickness not to be less than 10 mm I/C completie of work.

Painting or varnishing new iron work in small area or new wood with two coat of redy mixed priming paint and two coat of aproved superior quality ready mix paint (2nd quality synthetic enamel paint of approved brand such as British paint shalimar,Ashian,or equivalant as approvedby E/I)or varnish including supply of all material labour ,T&P etc. required for proper complition to the work paint to be used confirm the I.S.I. No 103-1950 S.I.NO-641above but for every coat after frist coat S.I.NO-641+642

Supply and fixing of chamber cover