PROVN OF IRON CANOPY FOR WINDOWS IN BLDG NO P-176, 76 x GEYSER AND 160 CEILING FANS AGAINST BER, PROVN OF DECORATIVE POLES WITH LIGHTS FROM ADM BLOCK TO KARGIL POINT AND FOCUS LIGHTS WITH ASSOCIATED ACCESSORIES AT JAK LI RC SRINAGAR UNDER GE 970 EWS

S&F rolled mild steel sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A, complete all as specified. .

S&F Pre-painted galvalume aluminum zinc coating GI based designed corrugated steel sheet (Khaprail Design) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws using torque adjustable electronic gun screws drills of suitable capacity complete all as specified.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to cut the brick wall to embed the Galvalume sheet inside the existing wall etc and making good, cutting not exc 10cm girth all as specified and as directed

M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges , coping etc. (using 12.5mm graded stone aggregate) complete all as specifed and directed.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely.

Supply only WPC complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall/roof projections including facia, cornices etc and applying exterior water proof wall care putty @ 1Kg (undiluted) per sq mtr of average thickness 1mm or 2mm over the prepared plastered wall/ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying Two or more coats of 100% Premium acryli smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistane asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, excellent dirt pickup resistance @ 1.79 litre/10 Sqm diluted with water as per manufacturers instructions over and including priming coat of exterior primer applied @ 0.9 litre (undiluted) /10 Sqm over new putyy surfaces of wall/ceiling complete all as specified and directed. Note : Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed.

M&L for Complete removal of existing treatment on external wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour with mechanial sander having RPM of 1500 - 2700 rpm, with internal dust extraction system for clean enviornment and preparation of old plastered/srapped surfaces of wall/ceiling by filling cracks by external wall putty/crack fill paste and applying exterior water proof wall care putty @ 1Kg (undiluted) er sq mtr of average thickness 1mm or 2mm over the prepared plastered wall/ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying Two or more coats of 100% Premium acryli smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistane asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, excellent dirt pickup resistance @ 1.79 litre/10 Sqm diluted with water as per manufacturers instructions over and including priming coat of exterior primer applied @ 0.9 litre (undiluted) /10 Sqm over old/new putyy surfaces of wall/ceiling complete all as specified and directed. Note : Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed.

Note for Ser No 08 & 09. The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the material lik Exterior Emulsion Paint, Putty etc after approval by the GE. (b) The contractor shall upload with the documents under cover I 'Memoradum of Understanding' (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding , trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc. (e) Work in patches and in narrow/widths, bands, cornies, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fittings, wiring etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10 Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carring out future work. (j) The work shall be carried out up to 4 the storey. (k) Incl removal of vegetation on walls incl roots on wall surfaces.

Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed,FRLSH Cable 1100 volts grade ISI marked drawn through and including PVC casing & caping on surface of wall, not less than 25mm width confirming to IS 9537 (Part-III) 1983, including all accessories like bend, tees, junction boxes etc., 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FRLSH cable as a earth wire connected to common earth dolly, etc and including sunken type pressed steel terminal box with 1.8 mm wall thickness, of suitable size for flush type switch with cover plate, cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete all as specified and directed.

Supply and fixing switch piano, flush type single pole, one way 5 Amps 3 pin, ISI marked for the same board complete all as specified and directed.

All as per item No 12 above but wiring with cable 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed FRLSH cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator (Suitable for BLDC fan) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 complete all as specified and directed.

S & F Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

Supply and fix water heater storage type with stainless steel innertance, electrically operated , single phase of capacity 25 ltrs with 5 star BEE rating vertical mounted with stranded fittings such as thermostate, heating element, LED indicator, safety valve, non-return valve, fixing clamp,Geyser bolt, nut, bolts, washers, in let and outlet PVC steel reinforcement hot/cold pipe complete all as specified a nd as directed.

Supply and fix water heater storage type with stainless steel innertance, electrically operated , single phase of capacity 50 ltrs with 5 star BEE rating vertical mounted with stranded fittings such as thermostate, heating element, LED indicator, safety valve, non-return valve, fixing clamp, nut, bolts, washers, in let and outlet PVC steel reinforcement hot/cold pipe complete all as specified a nd as directed.

M&L for Sub Main wiring using FRLSH Insulated unsheathed, multistrand copper conductor FRLS PVC cable 2 runs of size 6 sqmm for phase and neutral and 6 Sq mm for earthing. drawn through rigid PVC conduit / casing caping of suitable size fixed on wall/ground/Ceiling etc., and complete all as directed by Engr-in-Charge. Two runs of cable for phase / neutral and one run of cable for earth incl casing caping will be measured and paid as one unit length complete all as specified and directed.

S & F sheet metal enclosure double door for DBs TPN-4 Way 415 Volt with 200 Amp rated bus bar complete all as specified and directed.

S & F 415V 10KA 'C' curve miniature circuit breaker (MCB) of TP 63 Amp.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp .

Supply and Laying of PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trenches including fittings and testing complete all as specified and directed (20 mm dia) .

Supply and fixing metal stopcock gunmetal gate valve,gun metal non returning valve in PP-R pipe line of size 20 mm dia including connection and testing complete all as directed.

M & L for Cutting existing steel tubing for alterations or additions (Each cut measured) for 25 mm dia steel tubing complete all as specified and directed.

Supply and fixing landscape LED spike/bush light 1 x 09 W, 220V, with die -cast aluminium housing designed for outdoor usage, IP65 protection connecting with flexible copper conductor cable of suitable size from ceiling rose complete. Bajaj Cart Part No. BGSBL 9W LED WW complete all as specified and directed.

Supply and fixing Vintage Antique golden decorative Dual arm Cast iron poles with two LED lamp post 2 mtr long including base foundation as per company recommend all as specified and directed.

Supply & fixing of PVC cables and supply and fixing of FR PVC round sheathed copper conductor (flexible) industrial cable,1100 Volts confirm to IS 694 fixing/ laying on poles, through pipes, fixed to walls/surface including PVC conduit of min 20 mm dia, holding clips etc cross sectional area for following sizes complete, all as specified and directed .

Supply & fixing of PVC cables and supply and fixing of FR PVC round sheathed copper conductor (flexible) industrial cable,1100 Volts confirm to IS 694 fixing/ laying on poles, through pipes, fixed to walls/surface including PVC conduit of min 20 mm dia, holding clips etc cross sectional area for following sizes complete, all as specified and directed.

Supply and fixing on wall/surface/floor and testing of LED strip 75W non-integral flexible LED strip light white/warm white/ neutral white IP65 with high brightness for indoor and outdoor applications each strip have 5 mtrs length complete all as specified and directed.

Supply, installation, commisioning and testing of LT Control Junction board made up of 3 mm thick CRCA Sheet, double door, outdoor type, mounted on rigid angle iron frame, over all size not less than 600 x 600 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeder, dust and vermin proof, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 100 Amp rating for 3 phase and neutal 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals , cable glands with independent plates at bottom for each out going and in coming cables in cable alley and complete board painted with powder coating in siemens grey colour all as approved with and including following items with necessary excavation and as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work: - Incoming & Out going :- (a) Isolator SPN 63 Amp, 240 V - 01 No. (b) Isolator SP current rating 40 Amp, 240 V - 02 Nos (c ) Timer 01 No.

M & L for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials.

Supply and laying in repair of XLPE insulated,sheathed,armoured,heavy duty LT 1100 volts grade cable 16 Sqmm 2 core with aluminium conductor laid in trenches/pipes, fixed to poles/walls with suitable saddle complete all as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 M in depth and getting out in hard /dense soil for taking up or laying of cable all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceding Cum 25cm complete al as specified and directed.

Removal of surplus soil not exceed to a distance of 50M where directed at a level not exc 1.5M above the starting point.

Supply and laying dry river sand laid in trenches as cable cushioning and covering complete all as secified and directed. Note : Punned thickness only measured and paid.

M & L for brick well brunt locally available sub class'B' laid over sand cushioning to cable in trenches keping width of brick parallel to the length of cable complete all as specified and directed.

S&F KIOSK box weather proof made out of PVC, one piece moulded SMC base and out door pole mounted hinged door size 333 x 233 x 120 mm out side and 300 x 200 x 105mm inside dimensions comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 6 Amp MCB SP with base for controlling the street light, FI clamps 30x4 mm with necessary MS nuts bolts and washers including embossing/painting of Danger notice of size not less than 10 cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as specified and directed.

Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

Please Enable Macros to View BoQ information