REPAIR/ MAINT OF OFFRS SERVANT QTRS AT CARRIAPPA ENCLAVE USMAN ROAD RLB MARG MRA CHANAKYA MARG 1 RAK AND ATAL ROAD IN THE AREA OF AGE B/R-II UNDER GE (WEST) LUCKNOW

Amount

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and as directed.

M&L 15 mm thick rendering in CM (1:6 ) on brick wall or concrete surfaces finished fair and even complete all as specified all as specified.

M&L 15 mm thick rendering in CM (1:6 ) on brick wall or concrete surfaces finished fair and even including taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water complete all as specified all as specified.

M&L 5 mm thick rendering in CM (1:3 ) on ceiling surfaces, finished fair and even including taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water complete all as specified all as specified.

M&L preparation of New plastered surface of walls and applying two coats of white wash complete all as specified and as directed.

M&L for one coats of white wash on old plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of old surface of walls and applying subsequent coats of white wash complete all as specified and directed.

M&L for preparation of New plaster ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparation of Old ceiling surface and applying One coats of white wash complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site complete all as specified and as directed..

Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site complete all as specified and as directed.

Taking down Shutters of any description but exc 1 sqm and n exc 2 Sqm each complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

M & L 30 mm thick Factory made solid WPC (Wood plastic Composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15 x 15 square tube in side rails with screwing 8 x 28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacture instruction complete all as specified and complete all as specified and directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6"(152.4mm) pitch, complete for finished item of work including of all taxes, design complete all as specified and as directed.

Repairing/ easing to steel window side hung shutter including fixing of left or right MS handle, casement stay 300 mm long , MS tower bolt and welding wherever required complete all as specified and as directed.

S&F in repair of 4mm thick sheet glass ordinary quality of glazing in hacking out or broken glass with oil putty or wooden beads in squire not exc 0.5 sqm each panes complete all as specified and as directed.

Supply & fix in repair of stainless steel (G-304) wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stanless steel staples to windows complete all as specified and as directed.

S & F of Stainless steel ISI Mark Butt hinges 100mm size complete all as specified and as directed.

S & F of 200mm long MS Cromium plated barrel tower bolts of extructed section complete all as specified and as directed.

Supply& fix MS ordinary pattern spring "plate type" including roller & roller plate complete all as specified and as directed.

S&F of MS Cromium plated sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and as directed.

S & F of 200mm size Extruded aluminium alloy powder coated handles (As per sample kept in sample room) fancy type, fabricated type, anodised complete all as specified and as directed.

S&F in repair 25mm dia stainless steel curtain rod (weight not less than 200 gm/ RM) superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and as directed.

M&L preparation of old wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of Old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 20mm bore complete all as specified and as directed.

Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass coupling and washer complete all as specified and as directed.

Supply & Fixing in repair copper alloy long body bib taps half turn suitable for 15mm bore pipe with capstain head complete all as specified and as directed.

S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as specified and as directed.

S&Fin repair PVC (SWR) pipes in any length fixed to wall 110 mm bore complete all as specified and as directed.

S&Fin repair of PVC (SWR) pipes in any lenth fixed to wall 75 mm bore complete all as specified and as directed.

S&F in repair of PVC bends 110 mm bore complete all as specified and as directed.

S&F in repair of PVC bends 75 mm bore complete all as specified and as directed.

S&F in repair of PVC (SWR) vent cowls suitable for 110mm bore pipes complete all as specified and directed.

S&F in repair of PVC (SWR) vent cowls suitable for 75mm bore pipes complete all as specified and directed.

Supply and fixed in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete complete all as specified and as directed.

M&L for glazed ceramic colour tiles of size 350 x450mmx 7mm, 450x 350x 7 mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over 10mm thick rendering in cm 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc complete all as specified and as directed.

M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to matchincluding dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc complete all as specified and as directed.

M&L for ceramic colour floor tiles shade as approved size 7- 8 mm thick area of each tile exc 0.11 but n exc 0.18 Sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc complete all as specified and directed

All as per above item No 44 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including dismantling of false ceiling and boarding any description all as per manufacture insturction complete all as specified and as directed.

M&L for 75 mm thick Cement concrete PCC 1:4:8 type D-2(using 40 mm graded granite stone aggregate) in sub base of flooring complete all as specified and as directed.

M&L of sand cushion and joint filled with fine sand including leveling tamping & sweeping etc complete all as specified and as directed.

Providing and laying of Machine pressed precast concrete rouber moulded interlocking paver block any shape and size of 60mm thickness, M-35 Grade complete all as specified and as directed.

chandra kaushal supplier

M/s Bajpai Constructions

EVEREST CONSTRUCTION

RAJEEV AND ASSOCIATES

M/S S S A ASSOCIATES

Spectrum Enterprises

M/s Chandra Mohan and Sons

M/s Ramesh Chandra