CWEK/TOKEN-132/969 EWS/2025-26- SPL REPAIR BLDG NO P-30 (MT GARAGE) IN THE AOR OF AGE B/R-I UNDER GE 969 EWS (JOB NO- W/SPL REPAIR (BLDG)/39/823 FD WKSP/2025-26)

Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified.

M&L for framed brackets of angles or tees, rafter purlins with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 Kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated / profiled steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

Demolition of brick work, cement concrete block masonry, stone masonry or boulder masonry built in cement mortar .complete all as specified and directed.

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

All as per ser item No 06 here-in-before but except stone.

M&L for extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm to face stones and dressing of face beds and joints, as specified, of random rubble walling,uncoursed or brought upto courses for granite or trap stone all as specified and directed.

M&L raised pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per ser item No 10 here-in-before above but 5mm dia and above including 10mm dia in stirrups.

M&L cast in situ cement concrete type B-1, 1:2;4, (20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands etc complete all as specified and directed.

Demolition of cement concrete (reinforced) in any position and any thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) all as directed.

Taking down cement plaster of any description etc including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth with using extra cement in cement mortar 1:4 complete all as specified and directed.

M&L for raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and directed.

M&L for raised pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses all as specified and directed.

M&L for Preparing surfaces of newly plastered or undecorated walls and applying two coats of cement based paint complete all as specified and directed.

M&L for complete removal of existing treatment on old wall surfaces and applying three coats of white wash complete all as specified.

Demolition of concrete un reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc & n.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

Removing of excavated soil not exc 50m and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for extra stone walling for hammer dressing in faces stones of random rubble walling uncoursed for granite or trap stone complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type, B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including all necessary form work complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces and finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n.exc 200mm thick incl finishing surface flat and fair complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc exc 10cm but n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work, flat and fair finished surfaces complete all as specified.

M&L RCC design miz M-25 as in slabs supported on walls ,beams and columns in floors, roofs ,landings, balconies, canopies, deck slab and in shelves and the like, complete all as specified and directed.

M&L 150mm thick cement concrete 1:4:8, D-2 using 40mm graded aggregate in sub base floor, paving and hard standing complete all as specified and directed.

M&L for cement concrete work in pavement/ hardstanding of flexural strength 40 Kg per square centimetre in field using 400 Kg of cement per cum thickness of concrete 25cm or less complete all as specified and directed.

M&L for formwork to edges of concrete flats, threads, threads, bricks in floors, opening in concrete walls, floor and roofs n.exc 200mm wide and sides of RCC/PCC bend in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed.

M&L for forming 12mm thick expansion joints for 150mm thick concrete, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A', complete all as specified and directed.

M&L for forming contraction (dummy) joints 65mm deep x 10m wide, filled with sealing compound `A' Grade complete all as specified and directed.

M&L for forming construction joint 150mm deep x 10mm wide filled with sealing compound complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm .complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F sheet glass thickness 3 mm, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 CM in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for steel rolling shutters 1.25mm thick lath, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete, but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F welded steel wire fabric to steel member of weight n.exc 4 Kg per Sqm of 50mm pitch and 3.8mm dia complete all as specified and directed.

M&L for joist, channel ,angle or tee sections fixed independently without connecting plates etc complete conforming to Fe 410 Gde E 250 complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls to match with existing surfaces, floors etc.

M&L for point wiring in PVC casing capping/ concealed with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws gutter/plug etc PVC unsheathed cable into and including suitable board with sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor and One light point/fan point/Ex fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per ser item No 48 here-in-before but one 3 pin 5 Amps switch socket outlet on same board with accessories

All as per ser item No 48 here-in-before but one 3 pin 5 Amps switch socket outlet on independent board

S&F switch piano Flush type, single pole, one way 5 Amps 240 volts, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed.

M&L for point wiring in PVC casing capping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws gutter/plug etc PVC unsheathed cable into and including PVC board with Suitable sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F Switch socket combination 2 in1, 3 pin,5 and 15 Amps flush type, universsal complete all as specified and directed.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repairs lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S&F Ceiling rose, 3 Terminal /PVC/ polycarbonate, isolated body complete all as specified.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 Ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all complete all as specified and directed.

S&F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.

S&F LED inverter Bulb 12 Watt ,complete all as specified and directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used VTPN 12 Ways, with 400 Amps rated bus bar complete with 200 Amps rated MCCB as incomer and outgoing MCB's as required fixed properly on in position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed.

S&F Bulkhead luminaire comprising of high brightness LEDs 9/10W LED, IP-65/66 complete all as specified and directed. Make : Havells or equivalent in Bajaj/PHILIPS/CG

S&F energy saving environment friendly and robust LED Luminaire high efficiency with toughened glass of capacity 80 Watt complete including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia casing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM complete all as specified and directed.

M&L sub main wiring with two run single core 2.5 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia casing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as specified and directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc.

S&F 1100 V grade heavy duty U/G cable with PVC insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed one twin core cable flat or circular of size 25 sqmm 3.5 Core complete all as specified and directed.

Please Enable Macros to View BoQ information