PROVIN OF OTM ACCOMMODATION PH II AT LOHITPUR

Amount

Grubbing up tree trunk of girth exc 30cm and n exc. 100 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk of girth exc 100cm and n exc. 150 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk of girth exc 150cm and n exc. 200 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk of girth exc 200cm and n exc. 250 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk of girth exc 250cm and n exc. 300 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Add or deduct from Sr. item No 6 here-in- before for every 3 cm or part thereof above or below 15 cm average depth

Rough excavation n exc 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed.

Rough excavation n exc 1.5 m deep in soft/ loose soil and removing the same to a distance exc 1.5Km but not exc 5.0 Km and spreading, levelling, watering and consolidating under floors complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in soft and loose soil complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed..

Add to Sr. item No 11 here-in- before for each additional 1.5m or part thereof in depth beyond the first 1.5m in hard/dense soil complete all as specified and directed

Excavation over areas exc 1.5m but not exc 3.0m deep in soft and loose soil complete all as specified and directed

Add to Sr. item No 13 here-in- before for each additional 1.5m or part thereof beyond the 3.0m in loose/soft soil complete all as specified and directed

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells,cesspit, manholes, pier holes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide , exc 1.5 m deep but n exc 3.00 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes, pier holes etc n exc 10 sqm on plan and exc 1.5 m deep but n exc 3.00 m deep and getting out complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge

Returning ,filling in including spreading ,levelling watering and well ramming in soft/loose soil in layers n exc 25 cm thick complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum , getting out, returning, filling in, watering, and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

Surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed.

M&L for earth filling under floors including spreading, levelling, watering and well ramming complete all as specified and directed. Note: Earth obtained from excavation shall be re-used under this item.

M&L for sand filling under floors or in foundation including spreading, levelling, watering and well ramming in layers complete all as specified and directed.

Material and labour for filling of coarse sand as in filter media along Retaining wall complete all as specified and directed

M& L for sand cushioning in trenches for protection of under ground cable provided in layers of sand as 8 cm before laying the cable and 15 cm deep after laying cable complete all as specified and directed. Note : Punned thickness shall be measured and paid.

M& L for Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming / rolling and finishing to required size and shape etc n exc 1.5 m high from base by using soil complete all as specified and directed. Note : Earth obtained from excavation shall be re-used under this item as directed by Engineer in Charge.

M& L for Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming / rolling and finishing to required size and shape etc exc 1.5 m high and not exc 3.00m from base by using soil complete all as specified and directed. Note : Earth obtained from excavation shall be re-used under this item as directed by Engineer in Charge.

M& L for Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming / rolling and finishing to required size and shape etc exc 3.00 m high and not exc 4.50m from base by using soil complete all as specified and directed. Note : Earth obtained from excavation shall be re-used under this item as directed by Engineer in Charge.

M& L for Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming / rolling and finishing to required size and shape etc exc 4.5m high and not exc 6.00m from base by using soil complete all as specified and directed Note : Earth obtained from excavation shall be re-used under this item as directed by Engineer in Charge.

Removing excavated soil not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed .

Removing excavated soil exc 50 m but n. exc 250 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed .

Removing excavated soil exc 250 m but n. exc 500 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed .

Add to Sr item No 31 here-in-before for each additional 500m or part thereof beyond 500m and upto a total distance of 1.5km, complete all as specified and directed

M&L for hardcore of broken stones of gauge n exc 63 mm , deposited, spread and levelled in layers n exc 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for hardcore of broken stones of gauge exc 63 mm but n exc 100mm , deposited spread and levelled in layers n exc 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed

M&L for moorum/red bajri filling under floors, pavings or in foundation including spreading, levelling watering and well ramming in layers n.exc 15cm complete all as specified and directed.

M&L for treating the bottom and sides of excavation with anti termite treatment at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and directed

M&L for treating the back fill in contact with foundation with anti termite treatment at the rate of 7.5 litres of emulsion per sqm of vertical surface (area of substructure in contact with backfill to be measured) complete all as specified and directed.

M&L for treating the top surface of filled earth with anti termite treatment at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and directed

M&L for treating the soil alongwith external perimeter of the building with anti termite treatment at the rate of 2.25 litres of emulsion per meter of the perimeter wall complete all as specified and directed

M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded stone aggregate) ,in foundations, filling and mass concrete complete all as specified and directed

M& L Cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

M& L Cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in kerb stone, copings complete all as specified and directed

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate filling of back side for MS frame at site complete all as specified and directed

M&L Cement concrete 1:3:6 Type C 2 (using 40 mm graded stone aggregate) as in suface channels and drains complete all as specified and directed

M&L Plain cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregate as in PCC bond stones including form works/moulds etc complete all as specified and directed.

M& L Cement concrete 1:2:4 Type B 2 (using 40 mm graded stone aggregate) ,as in foundations, filling and mass concrete complete all as specified and directed

M&L Cement concrete 1:2:4 Type B 2 (using 40 mm graded stone aggregate) as in suface channels and drains complete all as specified and directed

M&L Providing cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L Providing cement concrete 1:3:6 Type C 1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L Providing Precast RCC M-25 (Design Mix ) using 20mm graded stone aggregate as in dunnage block of size 0.30M x 0.30M x 0.20M, set in CM 1:6 complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

M&L Providing, precast M-20 cement concrete in manhole cover slab (for use with masonry), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded stone aggregate as in chajja complete all as specified and directed

M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate)as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate)as in columns, pillars, piers, posts and struts complete all as specified and directed

M&L for precast cement concrete louvers and jallies 40mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggregate) set in CM 1:6 complete all as specified and directed

Extra for forming fair finished drain or channel 30CM inner girth in cement concrete using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed

Supply only Integral Water Proofing Compound complete all as specified and directed

M &L Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed

M &L Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed

M&L Brickwork with subclass 'B' bricks, old size brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed

M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 Type B 0 using (12.5 mm graded stone aggregate) complete all as specified and directed

M&L Continuous brick edging; using sub class 'B' brick with width equal to the width of the brick; laid dry on end vertically complete all as specified and directed

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed Note:(i) PCC bond stone shall be measured and paid separately (ii) RR masonary will be measured after deducting of PCC bond stone.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; rough finished flat surfaces of concrete complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; fair finished flat surfaces of concrete complete all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished flat surfaces complete all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter fair finished flat surfaces complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200mm (horizontal or sloping) thick; rough finished flat surfaces of concrete complete all as specified and directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished flat surfaces of concrete complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished flat surfaces of concrete complete all as specified and directed

Formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished flat surfaces of concrete complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ,rough finished surfaces of concrete complete all as specified and directed

S&F 2nd class Hardwood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and directed

S&F plain fillets (wrought) of Ist class hard (sal ) wood square, rectangular or triangular in section, clean sawn, secured with nails or brads of size Not exc 3 sqcm, bullnosed splayed, chamfered or rounded on one edge or face, complete all as specified and directed.

S&F plain fillets (wrought) of Ist class hard (sal ) wood square, rectangular or triangular in section, clean sawn, secured with nails or brads of size exc 3 and n exc 6sqcm, bullnosed splayed, chamfered or rounded on one edge or face, complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, both face is covered with decorative faces veneer with lipping/frame to match, complete all as specified and directed

S&F 2nd class HW small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu.cm each complete all as specified and directed

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S tube, in opening complete all as specified and as shown in drawing

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core as per specification complete all as specified and as shown in drawing

S&F 200 mm long aluminium anodised barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed

S&F 150 mm long aluminium anodised barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed

S&F 300mm long aluminium anodised sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed,complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete all as specified and directed

S&F Butt hinges of 100 mm size, medium weight, cold rolled mild steel and fixed, complete all as specified and directed

S&F Stainless steel butt hinge medium weight colled rolled of size 100 mm long complete all as specified and directed.

S&F 150mm aluminium anodised pressed handles, oval type, stove enamelled black, complete all as specified and directed

S&F 125mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F Brass handles, cast type, polished Bright 75 mm size complete all as specified and directed.

Supply and fixing Magnetic Catcher with all fixing accessories as in cupboards complete all as specified and directed

S&F 19/20mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed

S&F 6 mm thick veneered decorative plywood grade I (with BWR resin) with decorative face veneers on one face (teak finish) fixed with screws to timber frame complete all as specified and directed

S&F 40mm dia, cup board knobs fixed with nut, screws and washer of brass polished bright finished complete all as specified and directed.

S&F 75 mm size hasp and staple aluminium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F tubular towel rail, 20mm dia, brass chromium plated, D type, 60cm long between flanges including brackets complete all as specified and directed

Supply and fix galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture and 1.18mm and fixed to angle iron frame with tinned faces or galvanised wire staples complete all as specified and directed

M&L Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed

S&F framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work or water tanks and similar work conforming to Fe 290 gde E 165 complete all as specified and directed

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

M&L Mild steel TMT bars of Grade 500D 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars of Grade 500D 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars of Grade 500D 5mm dia and over upto and including 10mm dia cut to length, bent to shape required in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

M&L Mild steel TMT bars of Grade 500D 10mm dia and over cut to length, bent to shape required in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

S&F Joist, channel, angle, or tee sections fixed independentaly, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to grade Fe-410-W or E -250 quality A complete all as specified and directed

M&L for mild steel anchor plate of any size and any thickness including welding to pipe complete all as specified and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and fixing; also fastening conforming to grade Fe-410-W or E -250 quality A complete all as specified and directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S&F Welded Steel Wire Fabric to wood or steel member not exc 4Kg per Sqm complete all as specified and directed

Supply and fixing Pressed Steel Windows/Ventilator using box type hinges, MS Spring Latch, MS tower Bolt and telescopic stay complete all as shown in drawing No CESZ/2015/TD/006 Sheet 1/3 to 3/3 dated 05 Jan 2015 and specified

S&F pressed steel doors frames of size 105x60 mm, 1.6mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 3 mm thick MS sheet welded to 50 mm MS pipe frame complete all as specified and directed. Note: MS pipe shall be measured and paid separately

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete all as specified and directed

S&F Plain, galvanised, mild steel sheeting 0.8 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

Supply and fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed

S&F aluminium anodised glazed door/window sliding type shutters including framed with channel (thickness of aluminium sections shall be 1.98mm) including locking arrangement, glazing of tinted glass 4.8mm thick with and including aluminium glazing beading 0.70mm thick and rubber gasket and making good wall surface to match existing surface complete all as specified and directed.

S&F aluminium anodised ventilators fixed type of frame size 65 x 40 x 1.98mm thick with glazing of 4.8mm thick frosted glass with and including aluminium glazing beading 0.70mm thick and rubber gas kit complete all as specified and directed.

S&F aluminium anodised door with frame and shutter and glazing 4.8 mm thick tinted glass and 12mm thick prelaminated particle board exterior grade in bottom panel glass fixed with rubber gasket with aluminium glazing clips, section of aluminium door shall be of following sizes:- Frame : 100 x 44 x 1.98 mm thick with rawal plug Middle lock rail: 150 x 44 x 1.98 mm thick Bottom rail : 150 x 44 x 1.98 mm thick Top rail / Style: 85 x 44 x 1.98 mm thick Glazing beading: 0.70 mm thick Aluminium handle 'D' type: 150 mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Mortice lock – 100 mm 4 lever, Aluminium stopper cleat 2 Nos Floor mounted door closer 200 mm size Note :- PCC shall be measured and paid under relevant items.

S&Faluminium anodised windows with side hung shutter and frame made with aluminium section of size as appended below: - Frame: 65 x 40 mm x 1.98 mm thick , Top/ bottom and side style / rails of shutter -44 x 47 mm x 1.98 mm thick Glass: 4.80 mm thick tinted glass fixed with rubber gasket with aluminium beading .Aluminium fitting such as peg stay , aluminium hinges, aluminium handle 100 mm long, aluminium tower bolt 100 mm long and making good of wall surface with matching to existing surface complete all as specified and directed.

M&L for 100mm thick PCC M20 Design Mix (using 40mm graded stone aggregate) mixed with non metallic floor hardener as in floor finished by vacuum dewatering including supply of non metallic floor hardener as per manufacturers instruction complete all as specified and directed

M&L for 200mm thick PCC M20 Design Mix (using 40mm graded stone aggregate) mixed with non metallic floor hardener finished by vacuum dewatering including supply of non metallic floor hardener as per manufacturers instruction complete all as specified and directed

M&L 150mm thick cement concrete type B-2 1:2:4 (using 40mm graded stone aggregate) as in pavings/hardstanding laid in alternate bays (each panel n.exc 2 sqm ) finished even and fair complete all as specified and directed

M&L for 100mm thick PCC M15 (using 40mm graded stone aggregate) with chequered finish over 150mm thick hardcore over rammed earth as in floor. 10 mm thick top surface shall be wear resistance using nonmetallic floor hardner complete all as specified and directed. Note: Non-metallic floor hardner shall be measured and paid separately.

M&L 150 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate), trimixed concrete over 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate)over 100 mm thick hardcore over rammed earth, top layer shall be wear resistance using metallic hardner(granules form) and provision of copper strip of size 50mmx3mm thick in panel of size 3.00mx4.00m, copper strip to be connected to earth lead complete all as specified and directed. Note: Metallic floor hardner shall be measured and paid separately.

M&L for 10mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth complete all as specified and directed. Note: Metallic hardner shall be measured and paid separately under relevant item.

Supply only metallic floor hardener complete all as specified and directed

Supply only non-metallic floor hardener complete all as specified and directed

M&L for 100mm thick PCC M15 (using 40mm graded stone aggregate) with chequered finish as in floor complete all as specified and directed

M&L for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed

M&L for 75 mm thick PCC 1:2:4 Type B2 using 40 mm graded stone aggregate as in floors laid in panels, including spike rolling to surfaces or making impressions of expended metal ,whilst the concrete is green finishing the surface even and fair complete all as specified and directed

M&L 75mm thick PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in floor complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2(using 40mm graded stone aggregate) as in plinth protection/floor finish even & smooth without using extra cement complete all as specified and directed

M&L 40mm thick PCC (1:2:4) type B1(using 20mm graded stone aggregate) finish even and smooth using extra cement with glass dividing strip over 75 mm thick PCC 1:5:10 type E2 over 75mm sand layer covering with polythene film over rammed earth complete all as specified and directed Note: Glass dividig strip shall be measured and paid separately under relevant item.

M&L for 100mm thick PCC 1:4:8 type D-2(using 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L 25mm thick PCC(1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor complete all as specified and directed

M&L 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) finish even and smooth with using extra cement complete all as specified and directed

M&L for 100mm Thick PCC M15 (using 40mm graded stone aggregate) nominal Mix as in sub base to floor complete all as specified and directed

Treating cement concrete or granolithic concrete surfaces with three dressings of sodium silicate solution complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in floor finish even & smooth without using extra cement complete all as specified and directed

S&F glass dividing strips 38mm wide and 3mm thick as in floor complete all as specified and directed

M&L colured Glazed ceramic tiles in vertical surface 300x 450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L colured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L Vitrified Ceramic tiles (light shade )9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L Vitrified Ceramic tiles (light shade )9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirtings, dados and risers to steps etc. complete all as specified and directed

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed bed in 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed bed in 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18 to 20 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforma and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe complete all as specified and as directed.

S&F Polythene film black 50 micron laid in floor complete all as specified and directed

Supply and laying 200 micron polythene film black under floor in two layers as specified and directed. Note: Both the layers shall be measured and paid as one unit.

S& F Plastic dividing strips 98 x 1.5 mm laid and fixed in floors in 2m x 2m grid complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface, finished even and smooth complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 mixed with water proofing compound on fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for 10 mm thick rendering in cement mortar 1:4 mixed with water proofing compound over 10mm thick rendering in CM 1:4 on other than fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surface of walls finished even and fair complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface of walls finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface of walls finished fair and even complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (10+5mm)on fair faces of brick work or concrete surface of walls with top layer mixed with water proofing compound and finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surface of walls, finished fair and even complete all as specified and directed

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of ceiling of concrete surface, finished fair and even complete all as specified and directed

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of ceiling of concrete surface, finished even and smooth (without using extra cement) complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed

M&L for 5 mm thick rendering in cement mortar 1:3 over 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed

Supply only 50mm MS pipe complete all as specified and directed

M&L for Flush pointing to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of colour wash over a coat of white wash on walls complete all as specified and directed

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

Material and labour for Two Coats of Cement Base Paint over a coat of primer in camoflauge pattern including preparation of newly plastered surfaces complete all as specified and directed Note: Colour combination and design pattern shall be approved by GE.

M&L for preparing the new plastered surfaces and applying two coats of weather proof acrylic based exterior emulsion paint on walls in camoflauge pattern over a coat of acrylic primer complete all as specified and directed. Note: Colour combination and design pattern shall be approved by GE.

Material and labour for Two Coats of Cement Base Paint over a coat of primer including preparation of newly plastered surfaces complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of Exterior emulsion paint over a coat of alkali resistant priming paint on walls complete as specified and directed.

M&L for Preparation of new surfaces and applying 3 coats white wash on ceiling surfaces complete all as specified and directed

M&L 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M&L 4 mm thick frosted glass, and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Material and Labour for two coats of fire retardant paint over a coat of red oxide primer to steel surfaces of doors complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coat of fire retardant paint over a coat of priming paint on ceiling, complete all as specified and directed

M&L Painting 2 coats of synthetic enamel paint on new steel and iron surfaces of any description over 10 cm in width or girth including preparation and one coat of red oxide primer complete all as specified and directed

Material and Labour for 2 coats fire retardant paint over a coat of priming paint to walls including preparation of newly plastered surfaces complete all as specified and directed

M&L for Preparing ,cleaning new concrete/plastered surface and providing APP based polymeric membrane minimum 3mm thick of weight not less than 3.6 Kg per Sqm reinforced with polyester non-woven fabric over a coat of bitumen primer @ 0.30 liter/sqm and sealed with torch application and finish the surface with aluminium paint at top @ 0.2 kg/sqm as per manufacturer's instructions complete all as specified and directed.

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished using grey cement including 15mm screed bed in cement mortar 1:6 and joints shall be 4mm wide and sealed with 2mm deep polysulphide compound complete all as specified and directed.

M&L Painting lines, dashes, arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow complete all as specified and directed.

M&L rubber gasket joint(tyton) of size 100 mm bore complete all as specified and directed

Supply and fixing 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or floors complete all as specified and directed

Supply and fixing 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed

M&L for reinforced concrete pipe, 600mm bore class NP-2 laid and jointed with collars complete all as specified and directed

M&L for RCC NP2 150 mm dia pipes, laid and jointed with collars laid over 150 mm thick PCC 1:4:8 bed complete all as specified and directed.

M & L for Reinforced concrete pipes, 450 mm bore class NP-2 , laid and jointed with collars complete all as specified and directed

M&L for Testing drains as specified by filling the pipes with water to a head of 1.5m at the highest point including temporarily fixing of bends, etc. as required not exceeding 150mm dia complete all as specified and directed

M&L for Testing manholes as specified by filling with water complete all as specified and directed

S&F 20mm dia GI pipe, 'Medium grade' with all fitting and fixed to walls and ceiling or laid in floor complete all as specified and directed

S&F 15mm bore GI Pipe medium grade with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and directed

S&F 25mm bore GI Pipe medium grade with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and directed

Supply & laying 40 mm bore galvanized steel tubing "Medium grade" with GI fittings and laid in trenches/ under roads complete all as specified and directed

S&F 40mm dia GI Pipe light grade, with GI fittings and fixtures and fixed to wall complete all as specified and directed

Supply & laying 50 mm bore galvanized steel tubing "Medium grade" with GI fittings and laid in trenches/ under roads complete all as specified and directed

Supply & laying 50 mm bore galvanized steel tubing "Medium grade" with GI fittings and fixed to wall complete all as specified and directed

Supply & laying galvanized steel tubing "Light grade" of size 50 mm bore with GI fittings and laid in trenches/ under roads/ along pole/ wall for cable protection complete all as specified and directed

Supply & laying galvanized steel tubing "Light grade" of size 100 mm bore with GI fittings and laid in trenches/ under roads/ along pole/ wall for cable protection complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I 250 Litres capacity complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I 500 Litres capacity complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR- Part-I 1000 Litres capacity complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR- Part-I 2000 Litres capacity complete all as specified and directed

S&F bib taps, CP cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed

S&F Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed

Supply & fixing stop valves, 15mm dia, cast copper alloy,CP, fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

Supply and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 20 mm dia complete all as specified and directed

S&F Gun metal, globe or gate valve with iron wheel head, screwed noth ends for iron pipes of size 20mm bore dia all as specified and directed

Supply & fixing 75mm bore cast iron soil, waste and vent pipe, (spun) in any length with or without ears with cement joints laid in trenches/floor complete all as specified and directed.

Supply & fixing 100mm bore cast-iron soil waste and vent pipe, (spun) in any length with or without ears with cement joints laid in trenches / floor complete all as specified and directed

Supply & fixing 75mm bore cast iron soil, waste and vent pipe in any length with or without ears with cement joints fixed to walls complete all as specified and directed

Supply & fixing 100mm bore cast iron bends, diminishing pieces or tapers( larger bore measured) complete all as specified and directed.

Supply & fixing 75mm bore cast iron bends, diminishing pieces or tapers( larger bore measured) complete all as specified and directed.

Supply & fixing 100mm bore cast iron branch pieces, single (equal or unequal), and ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F cast iron cowl 75 mm dia complete all as specified and directed

Supply & fixing 75mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)(using 20mm graded stone) complete all as specified and directed

Supply and laying IS Marked un-reinforced precast concrete cable cover as per IS 5820-1970 class LV, Type - 1 flat size 250 mm x 150mm x 40mm thick, complete all as specified and directed. Note: All cable covers to be embossed with letters "LT CABLE'

M&L Salt-glazed stoneware gully traps,150X150 mm square or round mouthed, type 'P' complete all as specified and directed

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed

Supply and fix vitreous china squatting pan ‘Orissa pattern’ size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed .

Supply and fix vitreous china urinal flat back type of size of 465 x 355 x 265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing of plugs, bedding against wall in cement mortar 1:2, securing urinal to plugs complete all as specified and directed.

Supply and fix , 10 litres capacity, PVC valve less, syphonic action type flushing cistern, low level, white with inlet ball valve float, handle and flush pipe including brackets complete all as specified and directed

Supply and fix vitreous china, wash hand basin, white, flat back, size 550 x 400 mm including brackets, brass chromium plated waste fitting complete all as specified and directed.

S&F Stainless steel plate rack of size 750x900mm made out of 1.00mm thick sheet including bracket, clamps etc complete all as specified and directed. Note Design of plate rack shall be approved by GE.

M&L Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste including bedding in cement mortar to dwarf wall or including fixing, cast iron cantilever brackets, connecting union to pipe overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F 15mm bore brass chromium plated angle cock with wall flange complete all as specified and directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F chromium plated box type toilet paper holder complete all as specified and directed.

S&F 20mm mild steel chromium plated curtain rods decorative fancy type including CP brackets and a set of ABS finials complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for Writing letters/ Signs/ Arrows with fluorescent paint as directed complete all as specified and directed

M&L 150mm thick soling (or sub base) spread thickness with broken boulders or quarried stones (90mm to 63mm size of boulders), inter stices filled surface formed and rolled and consolidate to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L 200mm thick soling (or sub base) spread thickness with broken boulders or quarried stones (90mm to 63mm size of boulders), inter stices filled surface formed and rolled and consolidate to required gradient and camber with 8 to 12 tonnne power roller complete all as specified and directed

M&L 150mm thick (compacted thickness) WBM in two layers of 75mm each with broken stone aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) using granite, trap or basalt, spread, rolled and conoslidated to required gradient, camber, level, super elevation with 8 to 12 tonne power roller complete all as specified and directed.

M&L 200mm thick (compacted thickness) WBM in two layers of 100mm each with broken stone aggregate of grading 2 (63mm to 40mm size) or of grading 3 (50mm to 20mm size),using granite, trap or basalt, spread, rolled and consolidated to required gradient, camber, level, super elevation with 8 to 12 tonne power roller complete all as specified and directed.

M&L for preparation unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dirt etc.complete all as specified and directed

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 10 kg per 10 sqm. complete all as specified and directed

M&L for Rolling and consolidating formation surfaces in cutting by 8 to 12 tonne power roller including filling depression which occurs during rolling complete all as specified and directed

M&L bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% binder (paving bitumen any penetration) content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed

M&L for Cement concrete work in pavement/hard standing of flexural strength 40 Kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less including necessary form work complete all as specified and directed.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade A for 75mm thick slab complete all as specified and directed.

M&L for Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade A for 200mm thick slab complete all as specified and directed.

M&L for Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade A for 75mm thick slab complete all as specified and directed.

M&L for Forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade A. complete all as specified and directed

M&L for Forming contraction (dummy) joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank for 5 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified and directed Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank for 10 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified and directed Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank for 20 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified and directed Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank for 25 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified and directed Notes:-(i) PCC and earthwork shall be measured and paid separately.

M & L for Soakage wells of size 1.2x3.0m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

M & L for Soakage wells of size 1.8x3.0m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

M & L for Soakage wells of size 1.8x4.5m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

M & L for Soakage wells of size 2.4x4.5m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

S&F 1.6mm thick PGI sheet as in chute for hose complete all as specified and directed

S&F Puddle Flange 100mm dia complete all as specified and directed

S&F PGI Sheet 18 gauge as water bar complete all as specified and directed

S&F SS peg set of 3 complete all as specified and directed

M & L Basket ball ring 4 spring 20 mm MS solid steel rod 45 cm diameter powder coated structure with heavy quality nylon net complete all as specified and directed

Turfing with Sods (Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by Engineer in charge incl preparation of ground, fetching or rods and watering) including maintenance of lawns or turfing of slopes complete all as specified and directed

S&F Steel rolling shutters, (lath thickness 1.25) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed

Supply and fix pressed concrete pole of 9 meter long having 102mmX 152 mm at top and 102mm X 289mm at bottom,class 10 excluding foundation and coping complete all as specified and directed. Note: Excavation, returning filling, removal, foundation and coping etc shall be measured and paid under relevant items.

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 Core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 3 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 2.5 Sqmm 4 core as per IS 1554 Part-I and IS 7098 Part-I complete all as specified and directed

Supply and fixing of CIMFR certified flame and water proof LED light fittings 30W, recommended for gas/vapour group of IIA & IIB and Zone-1&2, IP-65 protection grade, cast aluminium alloy materials and heat & impact resistant toughened class-A clear glass cover, having anticorrosive epoxy powder coated finish with all accessories, pre-flexible cable drawn in flexible steel conduit complete all as specified and directed.

S & F Piano Switch single pole, one way flush type 6 Amp, 230 Volt complete all as specified and directed

S & F Piano Switch single pole, two way flush type 6 Amp, 230 Volt complete all as specified and directed

S & F Switch Socket combination outlet flush type universal 2 in 1, 3 pin 6 and 16 Amps, 230 volt complete all as specified and directed

S & F Switch Socket Combination outlet flush type universal 2 in 1, 3 pin 6 Amps, 230 volt complete all as specified and directed

Supply and fix epoxy powder coated Distribution Board, double door SPN 8 way for MCBs with common bus-bar at incoming neutral and earth bars, flush/surfaces mounted all specified as per IEC-61439-3 and directed

Supply and fix epoxy powder coated Distribution Board, double door SPN 4 way for MCBs with common bus-bar at incoming neutral and earth bars, flush/surfaces mounted all specified as per IEC-61439-3 and directed

Supply and fix epoxy powder coated Distribution Board, double door TPN 4 way for MCBs with common bus-bar at incoming neutral and earth bars, flush/surfaces mounted all specified as per IEC-61439-3 and directed

S & F of epoxy powder coated flame and weather proof lighing distribution board for MCB having IP66 grade of cast aluminium alloy material including 01 No of SPN incoming MCB 32amps Ç' type and 06 No SP outgoing MCB of rating 6-32 amps with complete internal wirings common busbar all as specified and directed

M&L for constructing brick masonary valve pit chamber of outside dimension 1150x1150x1000mm with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 course sand) for sluice valve with 900X900mm internal dimension with 2mm thick MS plate with 40x40x6mm MS angle frame duly painted with two coats of black anti-corrosive paint over a coat of red oxide primer for top cover of valve pit, RCC top slab (1: 2:4) necessary excavation, foundation concrete 1:5:10 and inside plastering with cement mortor 1:3 12mm thick finished with a floating coat of neat cement complete as per standard design complete all as specified and directed

M&L for constructing brick masonary valve pit chamber of outside dimension 900x900x900mm with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 course sand) for sluice valve 650x650x600mm internal dimension with 2mm thick MS plate with 40x40x6mm MS angle frame duly painted with two coats of black anti-corrosive paint over a coat of red oxide primer for top cover of valve pit, RCC top slab (1: 2:4) necessary excavation, foundation concrete 1:5:10 and inside plastering with cement mortor 1:3 12mm thick finished with a floating coat of neat cement complete as per standard design ,complete all as specified and directed

Supply and fix air termination, single pointed copper rod,12 mm dia, 300mm long complete all as specified and directed.

S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos 08 mm dia 25mm long hexagonal head screw complete all as specified and directed

Supply and fixing Aluminium strip 25 x 3mm fixed with DMC insulator and fixing screws etc. for roof conductors and down conductor above ground complete all as specified and directed.

S & F Ceiling rose surface bakelite three terminals complete all as specified and directed

Materials and labour for Earthing complete with GI earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.50 mtr below normal ground level connected to GI earth lead 4 mm dia by means of GI bolts, nuts, check nuts, washers made out of GI/steel, all as shown on electrical plate No 3 of MES schedule part-I, earth lead wire connected to indicated position including upto 7.5m long 15 mm bore GI pipe for earth wire protection and concrete pit in PCC(1:3:6, C1),Precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mesh including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 60cmx60cmx6.0mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mesh including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion complete all as specified and as directed.

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 3 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip of size 25x4mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mesh including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion complete all as specified and as directed.

M & L for earthing complete with copper earth plate electrode of 60 cm x 60 cm x 3 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to copper strip of size 20x3mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mesh including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion complete all as specified and as directed.

M&L For stove enamelled junction box rigid steel for conduit 20mm bore all as specified and directed

M&L for Stove enamelled rigid steel conduit of size 20mm bore all as specified and directed

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with Galvanized iron strip 32 x 6mm complete all as specified and directed

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with Galvanized iron strip 25x4mm complete all as specified and directed

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with copper strip 20x3 mm complete all as specified and directed

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with GI wire 4.00 mm complete all as specified and directed

M&L for switch flame proof rotary type with termination box in LM6,16A, single pole 250V complete all as specified and directed. .

M&L for flame proof switch & plug combined in LM6 cable termination box in LM6, 16A,250V,2P+ earth. complete all as specified and directed.

Supply and fixing weather proof flat twin core 2.5 Sqmm aluminium conductor cable complete all as specified and directed.

Supply & Fix fan regulator electronic type 5 steps 400 Watt connecting complete all as directed.

M&L submain wiring with two single core PVC insulated (FRLSH) unsheathed multi stranded copper conductor cable confirming to IS-694-1990 of size 6 sqmm (nominal area) drawn through and including stove enamelled steel conduit with all accessories/fittings, fixed/laid concealed in wall/ceiling and continous PVC insulated single core copper conduit (FRLSH) stranded unsheathed 6 sqmm as earth wire complete all as specified and directed Note: Two single core cable and one No. earth wire and one run of conduit shall be measured together as one length

Supply and fix Detectors flame proof complying with and type certified to EN-45 Addressable type smoke detector Photoelectric / Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed.

Supply and fix Fire Alarm sounders / Sirens electronic type horizontal double mounting single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for not less than 3500 meter range (diameter) with additional auxillary control (NO+NC) complete. (to be fixed outside the building)

Supply and Fix CI Sluice valve with gun metal spindle, flanged of class 1.6 PN, 100 mm dia as per IS 14846:2000 all as specified and directed.

Supply and install Addressable control module complete all as specified and directed.

Supply and fix Addressable manual call point resettable type complete all as specified and directed.

Supply and fix Addressable electronic sounder cum strobe complete all as specified and directed.

S & F TPN MCB, 10KA, 'C' curve 40 Amps complete all as specified and directed.

S & F SPN MCB, 10KA, 'C' curve 6 to 32 Amps complete all as specified and directed. .

S & F SPN MCB, 10KA, 'C' curve 40 Amps complete all as specified and directed. .

S & F Single pole MCB, rupturing capacity 10 kA, 'C' curve , 6 to 32 Amp complete all as specified and directed.

S & F ceiling fan complete with blades, down rods, 230V, 1200mm sweep min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) and suspended from fan hook and electrically connecting with twisted three core PVC insulated unsheated flexible cord of 0.70 Sqmm copper conductor cable from ceiling rose to fan complete all as specified and directed. .

Supply and fixing Exhaust fan 250 mm sweep metal body AC single phase 230V with self closing louvers, electrically connecting with twisted three core PVC insulated unsheated flexible cord of 0.70 Sqmm copper conductor cable from ceiling rose to Exhaust fan complete all as specified and directed. .

S & F of LED batten with inbuilt driver made out of high quality aluminium extruded housing and aluminium heat sink for mounting LEDs, mercury free and decorative end caps with maximum power consumption 24 Watts with min system luminous efficiency lumen/watt > 100, CCT not less than 6500K and CRI > 80, operating voltage of 140-270 volts AC, P.F. > 0.90, 2.5 KV surge protection and current THD < 15% complete and including all other standard accessories as per manufacturer's instructions, internally pre-wired including connecting up with twin core 0.75 Sqmm copper conductor flexible wire/cable complete all as specified.

S&F CIMFR certified 20W LED flameproof batten suitable and including single T8 tube of 20 Watts, IP 65 protected complete all as specified and directed. .

S&F CIMFR certified 30W LED flameproof Wellglass in die cast Aluminium housing with heat resistant toughened glass, IP 65 protected including lamp complete all as specified and directed.

Supply & Laying and testing PVC insulated, PVC sheathed cable, Galvanised strip or wire armoured, electric cable (heavy duty)with stranded copper conductor of size 1.5 sqmm, 2 core , 1100 grade complete all as specified and directed

M&L for Constructing brick masonary Chamber 60x60x60 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for valve chamber, with 2mm thick MS plate with 40x40x6mm MS angle frame duly painted with two coats of black anti-corrosive paint over a coat of red oxide primer for top cover of valve pit including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete all as specified and shown in drawings .

Supply and fixing gass fibre rainforced UV protected polycabonate cable junction boxes IP 66 weather proof for mounting on the street light pole of size 205X255X112mm complete width 01 No SP MCB 3 Amps and one No 5 way ELMEX terminal suitable for 10 sqmm to 16 sqmm cable complete with knock outs for cable entry- black colour complete all as specified and directed

Supply & fixing 45W LED street light fitting with pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with CCT> 5700K, electrical insulation class-1, lumen efficiency 115Lm/W(mm), THD < 10% and with 10KV rated SPD complete all as specified and as directed

Supply & fixing 2x24W LED street light fitting with suitable size and GI pipe bracket (B Class) with clamps with CCT> 5700K, electrical insulation class-1, lumen efficiency 115Lm/W(mm), THD < 10% and with 10KV rated SPD complete with connection all as specified and as directed

S&F of decorative LED 24W Luminaire with diffuser complete with connection etc. Complete all as specified and as directed

Supply and fixing Decorative ultra slim linear LED lighting fixture with extruded Aluminium heat sink, environmental friendly, energy efficient ready to use pack 10W LED 6K (2’) as a mirror light complete all as specified and as directed

Supply and fixing Decorative ultra slim linear LED lighting fixture with extruded Aluminium heat sink, environmental friendly, energy efficient ready to use pack 20W LED 6K (4’) model complete all as specified and as directed

Supply and fix Decorative ultra slim linear LED lighting fixture with extruded Aluminium heat sink, environmental friendly, energy efficient ready to use pack 18W LED 6K (2’) as a mirror light complete all as specified and as directed

S&F GI 40 mm dia 1.2 mtr long bended at suitable angle for street light fitting including fixing arrangements all as required at site complete all as specified and as directed

M&L Cable route indicator foot, 6 mm thick CI plate of size 100mm dia welded to MS angle 50x50x6mm embedded in PCC 1:3:6 type C1 block size 150x150x160mm complete all as specified and directed

Supply and fix cable route indicator oval shaped of size 200x150x6mm thick made out of Cast Iron with letter embossed as "HT UG Cable" or "LT UG Cable" fixed to 25x25x6mm mild steel angle iron 450mm long embedded in PCC block of size 200x200x200mm in PCC 1:3:6 type C1 using 20mm graded stone aggregate and including painting two coats of synthetic enamel paint over a coat of redoxide zinc chrome primer on exposed steel surfaces complete all as specified and as directed

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof Siemens gray structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:- Incoming 1 No 200 A FP MCCB, 35 KA service breaking capacity with thermal and magnetic release alongwith Earth fault relay and CBCT. Metering for Incoming: i. Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required. ii. RYB Phase indicator LED type lamp with 2 amps SP proctection MCB - 01 Set Bus Bars 400 Amps TPN Aluminium Bus Bars of suitable length Bus Bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints. Outgoing: MCCB, 415 Volts, 100 Amps, 35 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 2 No

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed

Supply & laying and jointing 100mm dia Ductile Iron pipe, with spigot and socket ends suitable for push on rubber joint centrifugally cast Class “K-9” inner side cement lining and outer side black bitumen coating laid in trenches including push on rubber (EPDM) ring with ISI marked complete all as specified and directed. .

M&L for DI special fittings of DN 80-200 mm Bends ( any type, radius and angle) tapers any type, ( straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch'Y' junction, double branch, cross (all sockets or socket spigot) collors, caps and plugs complete all as specified and directed.

Supply, installation, testing and commissioning 3 STAR rated of ISEER certified, factory designed, prefabricated and floor-mounted Inverter scroll type water cooled chiller machine of at least 13 TR nominal capacity at site conditions complete with hermetic scroll inverter compressors having independent refrigerant circuits & automatic stepless capacity control, water-cooled condenser, S/T horizontal DX COOLER type EVAPORATOR with carbon steel shell and seamless copper tubes with elastomeric insulation, suitable numbers of unit mounted variable frequency drive (VFD) along with necessary drive arrangement, lubrication system as per manufacturer's design required for smooth and trouble-free operation of the chiller package, common base frame, interconnected copper refrigerant piping along with elastomeric insulation, fittings, valves, expansion valves and accessories to interconnect compressor, condenser, chiller and expansion valve, microprocessor based control panel comprising of controls including sensors and equipped with a keyboard, LCD touchscreen access input system, protection and monitoring devices to perform control functions , wiring, vibration isolators, gauge panel, automatic safety controls, flow switch at evaporator and condenser and ozone friendly, CFC-free refrigerant all complete as specified and directed by the engineer-in-charge. The chiller shall conform to the following requirements / specifications: [i] Chilled water inlet/outlet temperature: 12/7 ˚C [ii] Evaporator fouling factor: 0.00010 ⁰Fft²hr/Btu [iii] Evaporator side pressure drop: 3 m of H2O (maximum) [iv] Condenser water inlet/outlet temperature: 32/36 ˚C [v] Condenser fouling factor: 0.00025 ⁰Fft²hr/Btu [vi] Condenser side pressure drop: 6 m of H2O (maximum) [vii] Minimum COP @ 100% load: 4.2 at design condition [viii] Minimum IPLV @ 100% load: 7.2 at AHRI condition [ix] Refrigerant (Ozone friendly type): R410A / R407C [x] Test standard: ARI 550 / 590

FRP INDUCED DRAUGHT COOLING TOWER -Supply, installation, testing and commissioning of Twin Cell FRP rectanguler shape, vertical, induced draught counter flow cooling tower of 15 TR size with uniform water distribution and optimal heat transfer, having tough fiberglass reinforced plastic (FRP) casing of sufficient structural strength to withstand vibrations and wind velocity upto 60 m/s, FRP basin, rigid honeycomb type PVC fill of suitable thickness, SS sprinklers and non-clogging sprinkler pipes, FRP drift eliminator, energy efficient induced draught axial type fans with factory set and dynamically balanced blades pitch, IE3 TEFC squirrel cage induction motor, suitable for operation on 3- Ph, 415 V, 50 Hz AC supply with IP 65 protection for enclosure, conforming to IS 12615: 2018, inlet, outlet, drain and over-flow nozzle connections, etc. complete with accessories as specified and directed . NOTES : Cost of Necessary civil work viz. foundation, supporting structure, etc. for placement of cooling tower shall be deemed to be included in this item

Supply, installation, testing and commissioning of 4000 CFM double-skin type horizontal, floormounted, top / side discharge outdoor type air handling unit of the following capacities at 50 mm static pressure,Hollow profile , with air-tight casing using gaskets and selfadhesive tapes and 0.6 mm thick pre-coated outer skin and 0.6 mm thick GI inner skin, 25±2 mm thick double skin panel with pressure injected CFC & HCFC free PUF having 'k' value of 0.02 W/°C/m & density 40 kg/m³ belt driven or plug fans with backward curved impellers for high static pressure mounted on aluminium extruded siderail base frame, EU4 pre-filter of 4/6 rows deep chilled water coils with anti-corrosion aluminium fins, suitable high efficiency (IE3) TEFC flameproof squirrel cage induction motor, hot water coil, PVC/nylon hinges & handles, view port and marine lamp, limit switch, SS-304 drain pan, vibration isolators/rubber pads (minimum 1" thick) inspection windows / doors, mixing box and supply / return / fresh air openings fitted with aluminium volume control dampers complete all as specified and directed by the engineer-in-charge. The AHU shall comprise of the following: [a] Suitable SISW backward curved plug fan, dynamically balanced, with AMCA certified blower [b] Flame-proof foot mounted (B3 construction) 3-Phase squirrel cage induction motor 415 V ± 10%, 50 Hz ± 5 %, combined variation ±10%, insulation class F, (for Blower of AHU) of Suitable capacity with temperature rise limited to class B, degree of protection IP 55, duty 51, ambiant temperature 45 ºC, conforming to IS 12615: 2011, IS/IEC 60079-1: 2007, IS 3682: 1966 gas group II A, II B [c] Flexible connetion made with airtight ASTM E84 (Class I) polyester fire retardant cloth riveted on periphery of cloth with extruded aluminium 'L' angle flange as per fan size at discharge duct/plenum [d] Washable type of 'EU4' filter (pre-filter, efficiency 90% down to 10 micron) [e] 4 / 6 rows deep chilled water cooling coil section with 0.15 mm thick copper fins and 0.36 mm diameter copper tubes tested on 21 kg/cm², with SS sandwiched drain tray, etc.

Supply installation testing and commissioning of Hot water generator of suitable capacity with all the fitting pipe,elbow, flanges,reducer and insulation with 19 mm thick nitrile number insulation covered with 26 gauge aluminium cladding complete all as specified and directed. NOTE: Hot water generator pump (1 working +1 standby)

Supply, installation, balancing and commissioning of factory fabricated galvanized 22G steel sheet metal (G.S.S.) round / rectangular ducting having zinc coating of 120 g/m² total on both sides and complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, volume control dampers, hangers, supports, etc. as per approved drawings and conforming to the latest edition of IS 655: 2006 & HVAC Duct Construction Standards - Metal and Flexible of SMACNA along with required scaffolding work to install the ducts at site complete all as specified and directed Note:- (i) Necesaary supporting structure for both fresh & return air ducts is deemed to be included in unit rate. The contractor will provide the design & get it approved by this HQ. (ii) The Provision of necessary protection of ducts (running through traverse wall/compacted soil) deemed to be including in unit rate of ducts. (iii) Provision of fire dampers in both ends of air ducting to be provide which shall be measured and paid under respective item.

Supply, installation, balancing and commissioning of factory fabricated galvanized 24G steel sheet metal (G.S.S.) round / rectangular ducting having zinc coating of 120 g/m² total on both sides and complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, volume control dampers, hangers, supports, etc. as per approved drawings and conforming to the latest edition of IS 655: 2006 & HVAC Duct Construction Standards - Metal and Flexible of SMACNA along with required scaffolding work to install the ducts at site complete all as specified and directed Note:- (i) Necesaary supporting structure for both fresh & return air ducts is deemed to be included in unit rate. The contractor will provide the design & get it approved by this HQ. (ii) The Provision of necessary protection of ducts (running through traverse wall/compacted soil) deemed to be including in unit rate of ducts. (iii) Provision of fire dampers in both ends of air ducting to be provide which shall be measured and paid under respective item..

S & F closed cell elastomeric 19mm thick nitrile rubber insulation with aluminum foil laminated on one side, having thermal conductivity not exceeding 0.037 W/mK at mean temperature of 20° C as per EN 12667, moisture diffusion resistance factor or ‘μ’ value of minimum 7,000 for base insulation material without the foil as per EN 12086, fire performance such that it passes Class 1 as per BS476 Part 7 for surface spread of flame and also fire performance of V0, HB as per UL 94, 1996, density without the foil between 40 to 55 kg/m³. The insulation material shall be as per Indian standard. The Aluminium foil shall be 12 microns thick and its weight shall be 193 gsm as per EN ISO 2286-2, tensile strength 90 N / 15 mm as per EN ISO 527-3 with elongation > 10% as per EN ISO 527-3 complete all as specified and directed.”

S & F closed cell elastomeric 13mm thick nitrile rubber insulation with aluminum foil laminated on one side, having thermal conductivity not exceeding 0.037 W/mK at mean temperature of 20° C as per EN 12667, moisture diffusion resistance factor or ‘μ’ value of minimum 7,000 for base insulation material without the foil as per EN 12086, fire performance such that it passes Class 1 as per BS476 Part 7 for surface spread of flame and also fire performance of V0, HB as per UL 94, 1996, density without the foil between 40 to 55 kg/m³. The insulation material shall shall be as per Indian standard. The Aluminium foil shall be 12 microns thick and its weight shall be 193 gsm as per EN ISO 2286-2, tensile strength 90 N / 15 mm as per EN ISO 527-3 with elongation > 10% as per EN ISO 527-3 complete all as specified and directed.”

S & F open-cell engineered 10 mm thick nitrile rubber foam acoustic insulation having good sound absorption, damping and barrier properties, antimicrobial product protection, thermal conductivity not exceeding 0.047 W/mK at 20° C, conforming to EN 12667, density 140-180 kg/m³ and conforming to class 1 rating for surface spread of flame in accordance with BS 476 Part 7 & UL 94 (HB, V-0). The acoustic insulation material shall be free of dust and fibre; it shall pass fungi/mould resistance as per DIN EN ISO 846 method A and bacterial resistance as per DIN EN ISO 846 method C and air erosion resistance test in accordance to ASTM Standard C 1071-05 without any laminate or covering (section 12.7) from an independent accredited testing agency complete all as specified and directed

S & F of air grill /diffusers with damper of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core complete all as specified and directed by engineer-in-charge.

S & F of return air grill /diffusers without damper of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core complete all as specified and directed by engineer-in-charge.

Supply and fixing GI construction volume control dampers lever operated type to be mounted on duct complete all as specified and directed

Supply, erection, testing and commissioning of fusible link type fire damper as per UL555 complete all as specified and directed

supply, laying / fixing, testing and commissioning of 65mm NB condenser water piping including necessary fittings viz. bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fastners) with necessary accessories complete all as specified and directed by engineer-in-charge. NOTES: [i] The pipe size 150 mm NB & below shall be MS 'C' class as per IS 1239 (Part- 1): 2004 & IS 1239 (Part- 2): 2011. [ii] The pipe size above 150 mm NB shall be welded black steel pipe heavy class as per IS 3589: 2001. [iii] Minimum thickness of MS sheet for pipe size above 150 mm NB and up to 350 mm NB shall be 6.35 mm and it shall be 4.47mm for pipe size 50mm and 65mm NB.

Supply, laying / fixing, testing and commissioning of 50mm NB ERW mild steel pipe, Class-C conforming to IS:1239 (Part-1)-2004 with necessary insulation chilled water circulation piping including necessary fittings viz. bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fastners) with necessary accessories duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of 25mm thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim along with adhesives and other necessary accessories complete all as specified and directed

Supply, installation, testing and commissioning of 50mm NB wafer type PN 10 rated short pattern CI butterfly valve having Gr. FG-200 CI body conforming to IS 210: 2009, seat having EPDM rubber lining, CF 8 stainless steel disc, AISI- 410 stainless steel stem, 2.4 MPa body test pressure & 1.6 MPa seat test pressure and standard flange end conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125 with necessary accessories complete all as specified and directed

Supply, installation, testing and commissioning of 65mm NB wafer type PN 10 rated short pattern CI butterfly valve having Gr. FG-200 CI body conforming to IS 210: 2009, seat having EPDM rubber lining, CF 8 stainless steel disc, AISI- 410 stainless steel stem, 2.4 MPa body test pressure & 1.6 MPa seat test pressure and standard flange end conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125 with necessary accessories complete all as specified and directed by engineer-in-charge.

Supply, installation, testing and commissioning of 50mm NB cast steel bolted cover Y-type strainer conforming to ASTM A- 216 Gr. WCB, AISI 304 screen with 1.2 mm diameter perforation, 16 kg/cm2 body test pressure & 20 kg/cm2 maximum working pressure and standard flange end conforming to BS 10 Table F / Class-150 with necessary accessories complete all as specified and directed by engineer-in-charge.

Supply, installation, testing and commissioning of 65mm NB cast steel bolted cover Y-type strainer conforming to ASTM A- 216 Gr. WCB, AISI 304 screen with 1.2 mm diameter perforation, 16 kg/cm2 body test pressure & 20 kg/cm2 maximum working pressure and standard flange end conforming to BS 10 Table F / Class-150 with necessary accessories complete all as specified and directed by engineer-in-charge.

Suply, installation, testing and commissioning of 50mm NB wafer type PN 1.0 rated swing check type valve (NRV), designed & tested as per IS 5312 (Part- 2): 1986, suitable to handle clear water having turbidity up to 5000 PPM, having CI body, door and diaphram, leaded tin bronze seat rings and flange drilling standard end connection, etc. with other necessary accessories complete all as specified and directed by engineer-in-charge.

Suply, installation, testing and commissioning of 65mm NB wafer type PN 1.0 rated swing check type valve (NRV), designed & tested as per IS 5312 (Part- 2): 1986, suitable to handle clear water having turbidity up to 5000 PPM, having CI body, door and diaphram, leaded tin bronze seat rings and flange drilling standard end connection, etc. with other necessary accessories complete all as specified and directed by engineer-in-charge.

Supply, installation, testing and commissioning of 50mm NB electronic, self-balancing, pressure independent type dynamic balancing valve rated for minimum 25 bar working pressure with integrated 3- Way modualating control valves in a single body and actuator capable of accepting upto 10 V DC and up to 20 mA electric signal and provide similar transduced feedback output to control system duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of apppropriate thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. NOTES: [i] Maximum close off pressure shall not be less than 6 bar for upto 50 mm valves. [ii] Maximum close off pressure shall not be less than 7 bar for 65 mm & above.

Supply, installation, testing and commissioning of 50mm NB precise balancing, double regulation type cast iron balancing valve 100 mm having FG 200 cast iron body conforming to IS 210: 2009, copper alloy trim, stainless steel 2 Cr. 13 stem, 2.4 MPa body test pressure & 1.6 MPa maximum working pressure and standard flange ends with necessary accessories complete all as specified and directed.

Supply, installation, testing and commissioning of 65mm NB precise balancing, double regulation type cast iron balancing valve 100 mm having FG 200 cast iron body conforming to IS 210: 2009, copper alloy trim, stainless steel 2 Cr. 13 stem, 2.4 MPa body test pressure & 1.6 MPa maximum working pressure and standard flange ends with necessary accessories complete all as specified and directed.

S & F of 6" dual scale (°F/°C), lower mount (radial), bimetal thermometer having 0.5 NPT process connection, Grade A accuracy class as per ASME B40.200, stem diameter 6.35 mm, laminated safety glass window, stainless steel 304 case, steam, process connection & joint, aluminium dial & pointer, IP67 protection, scale range 0- 60 °C complete with accessories, etc. as specified and directed.

S & F of 4" bourdon tube pressure gauge conforming to EN 837-1, having copper alloy process connection & pressure element, plastic black pointer & case, plastic crystal-clear window, snap-fitted in case, accuracy class 2.5, scale range 0- 25 bar complete with accessories, etc. as specified and directed.

S & F PVC/HDPE expansion tank of 500 litre capacity with pressure rating to suit the system pressure and sized adequately to compensate for water expansion due to operating temperature variations, conforming to IS: 2825- 1969 for 'non-fired pressure vessels' complete with inter-connection piping, non-return valve, safety relief valve and pressure gauge, insulated with 50 mm thick elastomeric insulation and cladded with 26 gauge aluminium complete with accessories as specified and directed.

Supply, installation, commissioning and testing of factory made, CPRI type tested, indoor, cubical compartmental type "HVAC Panel" of suitable size, conforming to IEC 61439-1 &2, IEC 61641, having both sides openable with hinged double doors & locking arrangement and IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length & size, including fixing lugs, bolts, screws etc. complete with accessories as specified and directed by the engineer-incharge. The HVAC Panel shall comprise of the following: Busbar Chamber: [i] 01 Set (3L + N) of copper busbar of rated capacity 250 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection Incoming: [i] 125 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having thermal magnetic based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set Outgoing: [i] 32 A, 415 V, Ics = Icu = 16 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settings & fixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 02 Nos. [for chillers] [ii] 32 A, 415 V, Ics = Icu = 16 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settings (0.70- 1 X In) & fixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 01 Nos. [for AHU]

ITEM NO 386 Cont... [iii] 20 A, 415 V, Ics = Icu = 16 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settings & fixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 08 Nos. [for chilled water supply pump, condenser water supply pump & cooling tower] [iv] LED phase indicators (Red, Yellow, Blue)- 12 Set [v] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 12 Nos. [vi] DOL Starter with inbuilt SPP, suitable for chilled water circulation pump (2HP)-02 Nos [vii] DOL Starter with inbuilt SPP, suitable for condenser water pump [2 HP]-2 Nos. [viii] DOL Starter with inbuilt SPP, suitable for cooling tower motor and Hot water pump [2 HP]-03 Nos.

M&L for 150x50mm perforated type cable tray, fully fabricated from hot-dip zinc coated rolled MS sheets (as per IS 4756:1996) of minimum thickness 1.2mm duly fitted with coupler plates of suitable dimensions and M8x25mm GI bolt, nut & washer including necessary fixing arrangements as per site requirements complete as specified and directed.

M&L for 200x50mm perforated type cable tray, fully fabricated from hot-dip zinc coated rolled MS sheets (as per IS 4756:1996) of minimum thickness 1.2mm duly fitted with coupler plates of suitable dimensions and M8x25mm GI bolt, nut & washer including necessary fixing arrangements as per site requirements complete as specified and directed.

M&L for 300x50mm perforated type cable tray, fully fabricated from hot-dip zinc coated rolled MS sheets (as per IS 4756:1996) of minimum thickness 1.2mm duly fitted with coupler plates of suitable dimensions and M8x25mm GI bolt, nut & washer including necessary fixing arrangements as per site requirements complete as specified and directed.

M&L for foundation to equipment/machineries such as HWG, LT Panel board, pipe line, common headers etc including any masonary work and Opening in walls for duct work, grills/diffusers/ blanking plates etc, finishing of openings including painting/whitewash work to match the interior decoration of existing work complete all as specified.

S & F multilayered HDPE make-up water tank of 2000 litre capacity made up of 100% virgin material, having 100% UV stabilized white outer layer, threaded lid, extra insert lid for protection against algae formation complete with inter-connection piping and non-return valve etc. complete all as specified and directed

Supply only chromium oxide green pigment complete all as specified and directed

Providing fibre reinforced glass dunnage block of size 30cmx30cmx20cm made out of following materials (a) FRG made of chopped strands of material of density 450gm/m3 conforming to IS code 1551-1996. (b) Iso- phtalic grade unsaturated polyester resin conforming to IS 6746-1994 (c) Thickness of laminated layers 5.0(-0+1mm) (d) FRG should be compatible with Ammunition storage for static charge complete all as specified with smooth grey finish and directed

SRC COMPANY INFRA PRIVATE LIMITED

Kanwarji Construction Co.

PUSHKARRAJ CONSTRUCTION PRIVATE LIMITED