ADDN ALTN TO STAGE NEAR PLAY GROUND OF VIDYALAYA BLDG AND UPGRADATION OF COURTYARD AREA FLOORING AND STAGE OF VIDYALAYA BUILDING

Amount

Dismantling of Cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation and getting out in hard/dense soil.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc.

M&L brushing neat cement slurry with 3.0kg of cement per sq. metre

M & L plain Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick in sub base flooring, , mass concrete , Pavings,hardstanding etc,complete all as specified.

M& L machine cut Kota stone ( greenish colour, mirror polished) slab as in flooring and common area 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over and including 20 mm thick screed bed in CM 1:3 complete all as specified.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

M&L for reinforced cement concrete 1:1.5:3 (using 20mm graded stone aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. (Note- Reinforcement and form work shall be measured & paid separately).

M&L formwork to sides and soffits of floor or roof beams and lintels, cantilevers, overhangs etc for flat and fair finished surfaces.

M&L for TMT steel bars 10mm dia and over in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.

M&L for TMT steel bars 6 to 8 mm dia as in strirups, spacers, binders cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.

M&L machine cut green marble 18 to 20mm thick ( table rubbed and pre mirror polished) slab in one piece as in swindow cill/jambs over and including 20mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete.complete all as specified.

S & F powder coated aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified Complete all as specified. Note: Minimum 25 micron anodisation for all aluminium sections)

S & F Stainless Steel curtain rod 25 mm dia fixed with brackets complete all as specified and directed

M&L powder coated aluminium grill with suitable aluminium frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aperture 50mm) all complete.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square exc 0.5 sqm in each pane.

S&F aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples

S&F second class HW plain & framed solid straight chowkats & wrought framed rebated on the solid rounded to chamfered put together with glue pinned at joints.

S & F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

M & L preparing surfaces of wood and wood based materials, and treating back of chowkats with tar or coal tar black paint etc area exc 0.1sqm but n exc 0.5sqm each

S & F mild steel hold fasts, wall ties and similar small articles confirming to Fe 290-0 or E 165

S & F stainless steel butt hinges100mm size, medium weight.

S&F stainless steel sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section , length of bolt 300mm complete as specified

S&F 150mm long stainless steel tower bolt of extruded section.

S&F 150 mm liong Stainless steel handles fabricated type

M& L for preparation of new wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Taking down cement plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L plastering 20mm thick in two coats 15 mm Backing coat in CM 1:4 and 5 mm thick setting coat in CM 1:3 using WPC of approved make on Brick or concrete surfaces with recrene finish all complete as directed by EIC.(WPC to be mixed in setting coat only and shall be measured & paid seperately)

Supply only water proofing compound of approved make

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick wall /concrete finished even and smooth complete all as directed.

M&L Rendering 10 mm thick in CM 1:3 on ceiling finished even and smooth all specified & as directed.

M&L for preparing of old painted concrete or plastered surface of any description described and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

Complete removal of existing treatment from surfaces by scrapping, washing & applying two coats plastic emulsion paint of approved make on wall over a coat of wall priming paint over a coat of Birla white putty on plastered surface and filling the surface imperfections such as holes, dirt, fine cracks all complete including preparation of surfaces all as specified and as directed.

M&L for preparing of new plastered surface of any description described and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

M&L preparation of new surfaces of wall including washing and applying two coats of Acrylic emulsion paint exterior grade (100% Acrylic) over and including a coat of external wall primer on walls.

M&L for preparing of new plastered surface of ceiling and applying two coats of plastic emulsion paint over a coat of primer at any height complete all as specified and directed.

M&L PCC Type C2 1:3:6 (40mm graded agg) in foundations, filling and mass concrete all as specified .

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm each.

Removing excavated materials outside MD land .

M&L Heavy duty industrial digital vitrified paver tiles of 600 x 600 x 20 mm thick having flexural strength greater than 38 N/mm2 of make Johnson Endura or eqvt as in pavements to required level & gradients complete all as specified and directed by EIC. (Cement Mortar screed bed shall be measured and paid separately)

M & L screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying tiles all as specified.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

M & L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall finished surface etc complete.

M &L moorum /red bajari filling ,spreading levelling laid in layers n exc 15cm thick each layer including watering etc complete as directed.

M & L hardcore of gauge n exc. 63 mm, depo-sited, spread and le-velled in layers n exc. 15 cm thick, watered and rammed to a true surface

Excavating in post holes each not exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm watering ,and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil.

S&F steel work in tubular trusses /posts including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS -1161-1979 grade st -240 all as spd and directed

Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws, having tensile strength of 550 Mpa yield strength and zinc (galvanised) + Aluminium combined coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes. RMR 1040 profile width 1125mm

M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer all as specified.

M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 CM width or girth including preparation of surface.

satguruenterprises

Unitech Enterprises

Nilesh Construction

sri ram construction

Mayur Enterprises

SHREE JAGDISH FURNITURE CO.