SITC of AC machines and Glowsign Board at the office of the Assistant Director, District Drug Control Office, South 24 Pgs.

Amount

Supplying and fixing 63A, 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:-Legrand/seimens/L&K)

Supplying and fixing 4 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Incoming-01 no.- 63A 4P MCB Isolator Outgoing- 12 nos- 6-32A SP MCB (Make:-Legrand/seimens/LK)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make- Legrand, Arteor/Myrius), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter Make- Legrand, Arteor/Myrius) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 01 no 6 A, & 1 no 16 A 3 pin Modular type plug socket (Make- Legrand, Arteor/Myrius) with 01 no 6 A, & 1 no 16 A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Finolex/RR Kabel /Gloster/ Polycab/Havells) in suitable size PVC rigid conduit 'FR' (Make: Precision/ Polycab/ AKG) incl. necy. fittings as required.

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC.

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC.

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & fixing 240 V 25A Timer controller for AC machine in SS double door (2+12) way DB enclosure with IP-43 ( Make-L&K/Schneider/ABB or equivalent) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2 x 4 & 1 x 2.5 copper wire dowels solder less socket by crimping method as to GS earthing attachment on wall incl.necessary connections as per direction of EIC:--- i)10kA C-curve,240V 25A DP MCB (L&K/Schneider/ABB)---1 no. ii) 24 Hr programmable digital timer(L&K/Schneider/ABB)--1 no. iii) 3 pole power contractor (L&K make cat no MNX22/230) with 1 NO + 1 NC additional contact block----1 set iv) LED indicator--2 no. v) 2 Module plate with cover (Legrand-Myrius make)-----1 no. vi) 20A auto-off-bypass SPDT toggle switch(Approved/reputed make)-----1 no. vii)10 A SPST Modular type switch (Legrand-Myrius make)-1 no. viii)Outgoing connection make ELMAX(Approved make)- 1 no. ix) Digital Ammeter-01 no.

Supply of 2.0 TR Split Non-inverter type, minimum 3 star air conditioner fitted with power saving rotary compressor having turbo minimum cooling capacity of 7050 watt suitable for operating at 230+/- 10%, 50Hz AC Single phase supply, having features turbo fan modes (auto, cool, fan, dry)anti freeze thermostat, anti dust air filters, three step fan speed adjustment with star rating 3. with initial charging of cooling agent R-32 (Make- Ogeneral/ Mitsubishi Electric/ Mitsubishi Heavy)

Installation, testing and commissioning charges for 2.0 TR Split Air Conditioner (both Indoor & Outdoor unit) by making suitable scaffolding arrangement as per site condition and including with iron braket (power coated), Nitrogen flashing,gas charging, Pressure testing including fixing copper pipes arrangement for IDU to ODU & walll cutting or hole making & minor civil work etc as per direction of EIC.

Supply and fixing of 5/8" & 1/4'' copper refrigerant pipe line with insulation tube heavy quality 9mm black nitrail rubber and lapping adhesive tapes for inter-connecting indoor & outdoor unit as per direction of EIC. (Totaline/Royku/Rajco)

Supply and laying of PVC drain pipe. (Make: Supreme/ Finolex/Oriplast).

S & Laying of PVC hard pipes of 25mm sizes incl. insulation, fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. (Make: Supreme/ Finolex/Oriplast).

Supply & Laying of 3 Core 2.5 sq.mm.unarmoured Cu control cable. 1.1 KV Gr. PVC/XLPE insulated Control cable incl.laying on wall surface by suitable clamping arrangement, proper glanding & finishing the cable ends with solderless sockets for following cables. (Make: Finolex/RR Kabel /Gloster/ Polycab/Havells)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top (Make- North-West/Crabtree) with indicator (Brand approved by EIC) & necy.Connections.

Supply and Erection of MS Grill Guard making 20mm x 5mm M.S. Flat duly welded and fabricated by 6'' gap in the side of 25x25x5 mm M.S angle four side of the grill side duly welded by Co's own tools and tackles, hinge 2-Palla door incl. S& F of 7 level Godrej lock & key and cutting by gas cutter including S&F of MS wire Net (8SWG) with 1" x 1" gap to be fixed on grill guard incl. painting the whole structure after preparation by two coat synthetic enamel paint over one coat of R.O. Primer as per direction of EIC [4'6''(L) x 3' (D) x 3'6'' (H) and approx weight 60 K.G]. [Make: TATA/ Gindal/Sail]

Supply and Fixing of sign board acrylic signages i) Supply and fixing of angle iron frame fabricated from 40 mm x 40 mm square four nos hollow bar with cross and radial support including one no 40x40 mm angle iron support in the middle for the Sign board of following size with suitable three nos. crosss angle support welded with 4 nos angle hook in equal space for fixing on the structure with all necessary welding and fabrication. The structure shall rest in both sides with proper welding as per instruction of EIC. ii) S&F LED Sign Board made 3 mm thick ACP Sheet (Alstrong/ Aludecor) finished with approved metallic colour as back ground (blue) after router cutting. The riser structure also shall be covered with ACP Sheet.& appx 6-7 inch depth (Both side ACP sheet) iii) S&F Special type of imported acrylic English letter appx 50 mm thickness flushed on the ACP board made on imported acrylic cast sheet. The mater appvd by EIC letter font shall be in horizontal line as mentioned. Matter taken from Authority

OFFICE OF THE ASSISTANT DIRECTOR SOUTH 24 - PARGANAS DISTRICT DRUGS CONTROL OFFICE DEPARTMENT OF HEALTH AND FAMILY WELFARE GOVERNMENT OF WEST BENGAL

iv) S&F SMD LED inside the board and to run for each letter including wiring , soldering etc and fixing the SMPS properly with the specification of the SMD 1.LED colour : White/ Red/ Blue (make-samsung /Nichia /Cree/ Hisine ) 2.Stright : 2 or 3 nos LED per module 3. Luminous Flux : 140 LUMEN 4. Life : 70000 burning hours 5. Visibility: 100 meter atleast normal eye 6. Power Supply: 1.2 watt to1.6 watt per module 7.Input : 230A.C , Output : 12V DC 8.Shape of LED : recrangle or square 9. Grade : IP - 65

v) S & F LED Power supply 300/ 400W IP65 50/60Hz frequency, 108 to 305 VAC driver power supply other electrical accessories the panel prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd ) vi) Cost of painting of MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping with emery paper properly make ICI/Asian paints vii) Cost of erection of scaffolding for fixing the Signage viii) Testing and commissioning of the LED board as per following nomenclature ix) Cost of carrying the LED sign board from work shop to site

Supply and Delivery of 1.1 KV grade following Al. armoured PVC/XLPE (Glostar/ KEI/ RR Kabel or as per direction of EIC). 3 core 6 sqmm (from PDB to Glowsign board loop box )

Laying of cable upto 3 core 25 sqmm on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire making holes etc. as necy. Mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 3 core 6 sq mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 3 core 6sq mm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. Fittings as reruired. 2x36/0.3(2.5 sqmm) + 1x22/0.3(1.5 sqmm)ECC

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Terms and condition

The Agency must procure the materials from the Manufacturere/ OEM or from their authorised sales channel so that the standard warranty/ support of the Manufacturer/ OEM becomes applicable to the products to be delivered and installed by them.

Make & Model no of each and every materials to be approved by EIC.

Defect liability period 1(one) year.

GHANASHYAM ELECTRIC STORES (BID ID -6820833)

MILLENNIUM AIRCON (BID ID -6750993)