Providing and laying 110mm HDPE pipe line works at Ward No. 29 Rayakotta road to Mullai nagar Sump and 90mm HDPE pipe line works at Rajaganapathi Nagar, Sanasandiram, Thiru Vee Kaa nagar Supply and Delivery og 10 HP Open Well Submersible motor, panel

Amount

Supplying and Delivery of the following sizes of HDPE Pipes PE-100 - PN8 conforming to IS-4984/1995, as specified to technical specifications in standard length including labour charges for loading, un-loading and staging at stock yard etc.., complete as per standard specification as directed by the Department Officers.(p.no.29) 110mm HDPE Pipe

90mm HDPE Pipe

Earth work excavation and deposition on the bank with an initial lead and lift of 10 meters and initial lift of 2 meters in hard stiffy clay stiff black cotton hard red earth murram, gravelly soils(SS20B) etc., complete as per std., specification. 110mm HDPE Pipe

90mm HDPE Pipe

Lowering the following HDPE pipes and specials into trench and laying to proper grade and alignment complete as per standard specification by deparment officers etc.., 110mm HDPE Pipe

90mm HDPE Pipe

Jointing the HDPE pipes and specials and testing the required pressure with water etc.., Complete as per standard specification 110mm HDPE Pipe

90mm HDPE Pipe

Testing of pipes for water supply with hudralic testing equipments by filling with water including cost of water @ 60/KL and testing to recommended Pressure in convenient stretches and attending the brusts if any occurred during the test excluding the cost of pipes but including other incidential and operational charges ETC... complete for the following diameteres of pipes HDPE Pipe 90mm 110mm HDPE Pipe

90mm HDPE Pipe

Refilling the excavated earth in to the trenches after laying the P.V.C. pipe in to the trench including cost of all labour charges and all other incidental charges etc., complete. 110mm HDPE Pipe

90mm HDPE Pipe

Supplying and Delivery of the following sizes of HDPE Pipes PE-100 - PN8 conforming to IS-4984/1995, as specified to technical specifications in standard length including labour charges for loading, un-loading and staging at stock yard etc.., complete as per standard specification as directed by the Department Officers. 90 mm HDPE stup bend

90 mm HDPE Elbow

90 mm HDPE Flange set

90 mm PVC Ball Valve

110 mm HDPE stup bend

110 mm HDPE Elbow

110 mm HDPE Tee

110 mm HDPE Flange set

110 mm PVC Ball Valve

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The nonreturn valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. for 10 HP 250 x 100

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % Duty lpm x m (75x 275) 10 Hp

Supply of 63 Amps Porcelain fuse unit (500 V)of best quality make including cost of handling charges and all other incidental charges.

Supply of 63 A TPN switch disconnnector fuse units in sheet steel enclosure with HRC fuses Double break with ISI make including cost of handling charges and all other incidental charges.

Supply of 40 Amps 30MA RCCB/ELCB (Four Pole) switch with ISI make including cost of handling charges and all other incidental charges.

Supply of 10 sqmm Pvc Insulated Single Core Multi Strand Fire Reterdant Flexible Copper Cable. with ISI Mark Conforming to IS 6 Sqmm Copper wire of best quality make including cost of handling charges and all other incidental charges.

Supply of 3 core 6 sqmm Jointing of XLPE Insulated and Sheated 3 Core Flat Type Copper Cable Conforming to IS 694/1990 and as amended Thereafter with ISI make including cost of handling charges and all other incidental charges.

Supply of 4 core 16sqmm JOINTING OF L.T. CABLES- 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THEREAFTER WITH ISI MARKING with ISI make including cost of handling charges and all other incidental charges.

Supply of 65mm UPVC Column pipe Supreme Heavy with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" GI Bend with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" X 36" pipe nipple with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" GI Flange Set with ISI make including cost of handling charges and all other incidental charges.

Supply of 2"G I Ordinary Coller with ISI make including cost of handling charges and all other incidental charges.

Supply and Fixing of wooden board including cost of material labour charges and all other incidental charges etc., complete as per standard specification

Supply of 6 sqmm Pvc Insulated Single Core Multi StrandFire Reterdant Flexible Copper Cable. with ISI Mark Conforming to IS 6 Sqmm Copper wire of best quality make including cost of handling charges and all other incidental charges.

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

SEENAPPA BASKAR (BID ID -1402617)