Construction of Watchman shed cum Godown at SSO Harishankar Nandupala Block Khaprakhol Dist Bolangir

Earthwork in excavation of foundation in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the Engineer In Charge.

Supplying, Filling sand in foundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P etc. complete as per specification and direction of the Engineer In Charge.

Cement Concrete (1:3:6) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work including watering & curing, etc. complete as per the direction of the Engineer In Charge.

Providing Fly Ash brick masonry work in using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc. complete as per the direction of the Engineer In Charge.

Reinforced Cement Concrete (M20 grade) with 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,required for the work etc. complete as per specification and direction for the Engineer In Charge.

Column Base

Column Footing

Column

RCC Plinth Band

RCC Lintel

RCC Beam

Sundhade & Chajja

RCC Roof Slab

Supplying, fitting and placing MS round/ deformed/ tor steel HYSD bar reinforcement of only of approved manufacturing companies of approved grade of required diameters of approved quality complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engineer In Charge.

16 mm cement plaster in cement mortar (1:6)including necessary scaffolding curing etc. in Foundation and Superstructure as per direction of Engineer In Charge.

12 mm cement plaster in cement mortar (1:6)including necessary scaffolding curing etc. in Foundation and Superstructure as per direction of Engineer In Charge.

Finishing surface walls with cement based wall putty (Water Based)of approved shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per direction of Engineer In Charge.

Finishing walls two coats with plastic emulsion paint of approved shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per direction of Engineer In Charge.

Supplying,fitting & fixing of Vitrified tiles in floor of size 600mm X 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement motar(1:4) and filling joints with white cement of approved quality including cost of all material labour t&P etc. required for the work all complete as per direction of Engineer in Charge (for new work only)

Supplying,fitting & fixing of Vitrified tiles in dado of size 600mm X 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement motar(1:4) and filling joints with white cement of approved quality including cost of all material labour t&P etc. required for the work all complete as per direction of Engineer in Charge (for new work only)

Providing fitting fixing of false ceiling with Aluminium andoised T Section No. 3215 with 2' 0" center to center, L Section No. 1705 on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'0"x 2'0" with 12 mm thick Prelaminated particle Board Suspended.

32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect

Providing, fitting and fixing of Al door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour

Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting

Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material

Supplying, fitting and placing of stainless steel of 304 grade in hand railing using 50mm dia of 2 mm thick circular pipe with Balustrade of size 32mm X 32mm X 2 mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32 mm X 32mm X 2 mm in 3 rows in stair case as per approved design and sprcification, buffing, polishing etc with cost , conveyance taxes of all materials, labourT&P as per direction of Engineer In Charge.

6 mm (1/2") thick cement plaster over rcc surface in cemnet mortar (1:4) with watering and curing etc.including cost,conveyance,royalities,all taxes and cost of all materials and cost of all labour with T & P required for the work etc .complete complete as per the direction of the Engineer in charge.

Internal PH Work

GPH Works: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge.

Ground Floor

20 mm CPVC (sdr-13.5) pipes

25 mm CPVC(sdr-13.5) pipes

32 mm CPVC sdr-13.5 pipes

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge.

Ground Floor

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge.

Ground Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the Engineer in charge.

Ground Floor

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge.

S/F standard sized two way CP Bib cock of 15mm dia

S/F standard sized 15mm dia angular Stop cock

S/F standard sized pillar cock of 15mm dia

Fixing of 32 mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.

Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.

15mm dia PVC connection pipe 450 mm long

15mm dia CP Extention Nipple

S/F circular type stainless steel jalli (grator) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge.

S/F Health Faucet with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge.

15mm dia CP Health Faucet of 1.01mtr long,

Supplying all materials, labour, T&P and fitting and fixing PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.

In Building

110mm diameter PVC SWR pipes

110mm PVC door Tee

110mm PVC offset

110mm PVC door bend

110mm PVC plain shoe bend

110mm PVC vent cowl

110mm P-trap

110mm PVC plain bend

Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer-In-Charge.

250mm to 375mm thick wall

Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern of Hindware/Jaquar/Parryware with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge.

10 Liters capacity PVC cistern with 32mm dia flush bend.

Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. Including Seat and cover.

Fixing wash basin with hole for Pillar taps confirming to IS 2556 : Part 4 -2004 with cast iron or MS brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. (550x400)large with padestal

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge.

B.E mirror

Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel ring complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fixing standard sized Chromium Plated soap case of complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge

CP Soap Holder

Supplying all materials, labour, T&P and fixing standard sized Robe Hook of complete with all as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Single lever Concealed Deusch mixer with provision for connection to overhead shower only of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per specification complete as per direction of Er-in-charge.

Fixing Rotational moulded Poly Propelene double layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts, fixing ball valve etc,including hosting upto a height of 5 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge.

2000 ltr capacity Double layer cylindrical vertical water storage tanks

Internal Electrical Work

Recresed wiring to light point/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FR PVC insulated single standard multistandard copper conductor of ISI marked and ceilling rose ISI marked mounted on MS box having front modular cover of suitable size MS modular box with 1.0 sqmm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer In Charge.

Group C

Recessed writing to 5/6 amp socket oulet with 6 amp 250 V clip in modular type swich ISI marked mounted over GI modular box with face plate and cover of suitable size including all accessories complete as per direction of engineer in charge.

Recessed wiring for 6 pin 15/16 amp socket outlet with 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring to submain with 4 X 16 sq mm FR PVC insulated single core multistandard copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non metalic heavy duty PVC conduit along with 1.6 mm thick along 2 X 10 sq mm FR PVC insulated single core multistandard copper conductor as earth wire as required. make of wire Finolex/Polycab/ Anchor/Havels/Eq)

Recessed wiring to submain with 2 X 2.5 sq mm FR PVC insulated single core multistandard copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty PVC conduit along with 1.6 mm thick along 1 X 1.5 sq mm FR PVC insulated single core multistandard copper conductor as earth wire as required. make of wire Finolex/Polycab/ Anchor/Havels/Eq)

Recessed wiring to submain with 2 X 1.5 sq mm FR PVC insulated single core multistandard copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty PVC conduit along with 1.6 mm thick along 1 X 1.5 sq mm FR PVC insulated single core multistandard copper conductor as earth wire as required. make of wire Finolex/Polycab/ Anchor/Havels/Eq)

Ceilling mounted indoor type batten type LED Luminaire with LED Lamp similar to cat No. LGLZ01X024XW / Eq. model of bajaj/ Philips/ Wipro/Eq.

Ceilling wall mounted type BULK HEAD Luminaire with similar to cat No. LBLK02X010XW / Eq. model of bajaj/ Philips/ Wipro/Eq.

Supply, Installation, Testing and Commissioning of ceilling fan 1200 mm sweep, including wiring the down rods of standard length upto 30 cm with 1.5 sq mm FR PVC insulated single core multistandard copper conductor and as required. Make Havells/Orient/Usha/Crompton/ Eq.

Supply and Fixing of 12 W LED Down light (S) similar to Jaquar cat no. LNVE02R012SW/Eq.

Please Enable Macros to View BoQ information