PROVISION OF WIRING WITH LIGHT FITTINGS AT CERTAIN CAR PARKING, PROVISION OF AIR VENTILATION FAN AT MD AND OTM ACCN AT TRV AREA AND ADDN/ ALTN OF SUBMAIN WIRING AND CERTAIN OTHER FITTING AND FIXTURES AT DHQ-14 BLDG NO P-97 AND RE-LOCATION OF PUMPING

Amount

S&F in repairs, 5mm thick solid PVC sheet Wall Lining with wood grain printed design and inclusive of solvent cement for fixing over and including 5mm thick PVC sheet fillet frame of width 35mm fixed to the aluminium frame of size not less than 25sqcm with screws at 300mm centre to centre in mid portion & alround on borders or as per the site requirements etc as per specifications and directed by the Engr In Charge

S&F in repairs, 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site

M&L in repairs to 18 mm thick rubco huat rubwood in built up interiors as in cupboards, shelves wall lining, box structure and including all fitting items complete all as specified and directed. After completing the carpentry works all the visible woods area will be sanding by No.60 & 80 Wood Sanding Paper, after that will be applying Sheenlac make Filler with mixing of NCD Thinner (Sheenlac make), then pasting Chock Putty in the shabby/nailing area which will be sanding with No.120 Sanding Paper, after that will applying Sealer of Sheenlac make and walnut colour stainer, then cutting with No. 320 Sand Paper, after completing the above process will spray Melamine Polish of Berger/Sheenlac make then cutting with No.400 Sanding Paper. Finally will applying Silicon make: Waxpol with soft Banyan Cloth for better shining/finishing. Make of rubber wood members: RUBCO or equivalent

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs 415 Volt/230 Volt complete all as directed.

Taking down old aluminium sub main wiring of any size complete all as directed.

Taking down existing light fittings of any type any capacity complete all as directed.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/fan regulators etc. covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :- Make of wire : Polycab/Gloster/Anchor/Havells/ Finolex/Anchor Make of PVC Casing & caping : Modi/Precision/Supreme/Finolex /Polycab

Description same as per Srl item No 8 above but One light/fan point controlled by one switch 5 Amps one way.

Description same as per Srl item No 8 above but two light points controlled by one switch 5 Amps one way.

Description same as per Srl item No 8 above but, point wiring for 3 pin switch socket outlet , 5 Amps on independent board

Description same as per Srl item No 8 above but, point wiring for 3 pin switch socket outlet , 5 Amps on same board

Description same as per Srl item No 8 above but, one Bell point controlled by one bell push switch 5 Amps one way.

All as per Srl item No 8 above but, point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour as earth continuity conductor for one 3 pin 15 Amps socket outlet on independent board.

Description same as per Srl item No 9 above but, point wiring for 3 pin switch socket outlet , 15 Amps on same board

S & F for switch modular type, 6 Amps 1 module, 230 volts AC Circuit complete all as specified and directed.

S & F Switch modular type, flush type, single pole one way 16 Amps all as directed.

S & F Switch piano type, flush type, single pole one way 5 Amps all as directed.

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/Legrand/ Havells

S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, flush type, universal all as directed. Make : Roma (Anchor)/Legrand/ Havells

S&F modular bell push 6 Amp one module 230 Volt AC AC circuit complete all as specified and directed.

S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed.

M&L for ceiling rose, 3 phase, PVC/Polycarbonate, isolated body, complete all as specified and as directed.

Supply & fix AC starter switch of capacity 25 Amps working on 240 volts AC supply with 15 Amps plug top and 15 Amps sockets suitable for air conditioner Make : Crabtree Model No : ACTO252504 or equivalent

Supplying, fixing and testing tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make : Luker Cat Part No : LT5M20 or equivalent to CG/Philips /Havells

Supplying, fixing and testing tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make : Luker Cat Part No : LT510P or equivalent to CG/Philips /Havells

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 18 Watt recess mounted 220V , 50Hz with Aluminium housing ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Philips Cat Part No : Dura Slim or equivalent make in CG//Havells / Luker. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting .

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 15 Watt recess mounted 220V , 50Hz with Aluminium housing ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Philips Cat Part No : Dura Slim or equivalent make in CG//Havells/ Luker. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting .

S & F and testing fully diffused recessed mounted 2' x 2' LED luminarie with high transmitive diffuser for indoor spaces of cap 36 watt including all accessories and fixing arrangements for fixing the light fitting to any heighted indoor places complete all as specified and directed. Make : Philips model No. RC360B LED 36S-6500 V1 L60W60 PSU OD or equivalent to Havells/CG/Luker

S & F FUOCO track LED light 12 watt, (WH/WW/NW) including channel of suitable size of required length as directed. Make : Luker model No. LSPT12 (60 degree) or equivalent to Havells/Philips/CG

Taking down carefully ceiling fan of any make, size from its location, and deposit to the MES yard/Store complete all as directed by Engineer-in-Charge.

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories. Make: CG Model No : ENERGION Riviera with out remote 32 watt or equvalent make of Havells/Orient/ Usha /Bajaj/ Luker

S & F stepped type electronic fan regulator modular type on the existing/ new modular plate etc. as reqd 120 W complete all as specified.Make : Anchor/Cona//Legrand

S & F air ventilating fan 250mm sweep single phase, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed Make : Havells Model No. FHVVEDXOWH10 Ventil Air DX or CG Model No. BRISK AIR NEO or equivalent to Orient/Usha/Khaitan/ Luker

S&F wall mounting Fan 400mm sweep including all fixing arrangement complete all as specified and as directed by Engineer-in-Charge. Make : Havells Model No : 400mm FHWMWHSWHB16 (Marvel Wind HS White Blue) or equivalent to Eva/CG/Usha/Orient/ Luker.

M&L submain wiring with 2 runs of 4.0 sqmm mutistranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of 4.0 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth contuinity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping of suitable size but not less than 25mm width complete all as directed. NOTE : Three runs of 4.0 sqmm cable alongwith casing & caping shall be measured as one unit.

S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor cable with provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity, using proper colour coding Phase Red /Yellow/ Blue, Neutral- black and earth- green in existing surface / recess steel /PVC conduit in wall/ on surface (ISI marked) all as directed.

Description all as per item No. 31 above but submain wiring with 2 runs of 6.0 sqmm and one run of 6.0 Sqmm as earth continuity conductor. Note : Three runs of 6.0 sqmm cable alongwith casing & caping shall be measured as one unit.

M & L submain wiring with 4 run single of 10.0 sq mm multistranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of 10.0 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth continuity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping of suitable size but not less than 30 mm width complete all as directed. NOTE : Five runs of 10 sqmm cable alongwith PVC casing and caping shall be measured as one unit .

Description all as per item No. 34 above but submain wiring with 4 runs single of 16 Sqmm and one run of 16 Sqmm as earth continuity conductor on surface or concealed in wall. Note : Five runs of 16 sqmm cable alongwith PVC casing and caping shall be measured as one unit.

S & F to wall with fastner of suitable size, sub main distribution board IP 43 with double door, with CRCA sheet of thickness min 1.6mm, indoor type, wall mounted type suitable for one incomer and 8 x outgoings with following alongwith all connected accessories as per OEM:- (i) MCCB 4 pole 400 Amps, 36 KA, thermal magnetic release as incomer- 01 No (ii) MCCB 4 pole 80 Amps, 25 KA, thermal magnetic release as outgoing - 08-Nos. (iii) Metering unit with multifunction meter, Buzzer & phase indicator (3 Nos)- 01 No. (iv) Cable alley unit for both side- 02 Nos (v) Bottom cable unit- 01 No (vi) Metering unit, 2 x cable alley unit and Bottom cable unit should be coupled with sub main distribution board. Make :- (i) Indoasian model No. SMDB400 8W DD ME, Cat No-812211 or equivalent to Havells (ii) Metering unit cat No. 812251 (iii) Cable alley unit Cat No. 812242 (iv) Bottom cable unit, cat No-812153

S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated and making good to the distrubed surface /walls complete all as specified and directed.

S & F Triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TPN DB system 04 ways and making good to the distrubed surface /walls.

S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways and making good to the distrubed surface /walls.

All as per item No. 39 above but 8 way

All as per item No. 39 above but 6 way

Supply and Fixing 4 pole MCCB 80-100 Amp adjustable type 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed.

S & F MCB TP 63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

S & F MCB TPN 63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. Note for item No 43.00 to 46.00 :- All the circuits should be connected to MCBs alongwith copper reducer terminals duly crimpled.

Taking down carefully existing split type air conditoner of any make,type, size and any tonnage keep in safe custody of contractor and painting the outer area and re-fixing the same its location after completion of work all as directed.

Taking down carefully existing speaker of any make,type, size and any Amps keep in safe custody of contractor and painting the outer area and re-fixing the same its location after completion of work all as directed.

Taking down carefully existing smoke/heat detector of any make,type, size keep in safe custody of contractor and painting the outer area and re-fixing the same its location after completion of work all as directed.

Supply and laying of rigid non metallic PVC conduit of 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reduses, bell mouth tube ends and fixing accessories such as couplers lock nuts, saddles pipe hooks etc all as directed.

All as per item No. 50 but 32mm dia

All as per item No. 50 but 40mm dia

M & L Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement all as specified and as directed by Engineer-in- Charge

Supply, laying, testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 150 Sqmm 3.5 core (laid on floor/Roof/wall in proper saddling all as specified and directed. Make Polycab/ Gloster/ Anchor/ Havells/ Finolex.

Supply and laying/ fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 90 mm (OD) x 75 mm (ID) along with connected accessories like couplers. bends,end caps etc. for LT cable protection all as specified and directed

Supply and fixing with wall, piller, wooden structure etc. uPVC Panel Trunking of size 60 mm (H) x 60 mm (W) for running of wire, cable of any type etc complete all as specified and directed by Engr In charge. Make :- Precision or equivalent to Supreme .

All as per item No.56 above but size 45mm (H) x 60mm (W)

Earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including concealed / on surface as possible PVC conduits (Medium grade) of size not less than 20 mm dia including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete as specified for :- Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC conduit : Modi/ Precision/ Supreme/ Finolex/ Polycab.

Description same as per Srl item No 59 above but One light/fan point controlled by one switch 5 Amps one way.

Description same as per Srl item No 59 above but, point wiring for 5 pin switch socket outlet , 6 Amps on same board

Description same as per Srl item No 59 above but, point wiring for 5 pin switch socket outlet , 6 Amps on independent board

All as per item No.59 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 3 pin 15 Amps socket out let on independent board.

S&F Socket outlet 2 in 1, 3 pin, 6 and 16, flush type, universal all as directed. Make: Anchor/Cona/Legrand.

S&F Socket outlet 2 in 1, 3 pin, 6 Amp, flush type, universal all as directed. Make: Anchor/Cona/Legrand.

S & F high speed air ventilating fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVDSREPSG12 Ventil Air DS (HS) R or CG, Model No: 300 mm TRANSAIR or equivalent to Orient / Usha/ Khaitan/ Luker.

S & F heavy duty exhaust fan 380 mm sweep single ph 230 volts, 1400 RPM steel body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHEHDSPDB150 Ventil Air DX or CG, Model No: EXHD380-4-1 or equivalent to Orient / Usha/ Khaitan/ Luker.

M & L for Cutting holes into or through brick walls built in cement mortar superficial area exc 400 sqcm but n.exc 0.10 sqm and making good in cement mortor 1:3 or cement concrete 1:2:4 type B1 of required complete all as specified by Engr in charge.

Supply and fixing of LED tube light fittings with 20 Watt (Warm white/white colour as per requirement of site complete) light source in integral module with polycarbonate/Acrylic diffuser more than 85% efficency of light with LED lamp efficay as 110 Lum/W THD ≤ 15% with operating voltage range 150-300V, 50Hz with driver efficency > 85%,surge voltage withstand 2.5KV,Power factor ≥ 0.9 ,energy efficient fitting surface mounted including connecting up with two/three core cable complete all as specified and directed Make: Luker/ Havells/Philips/Crompton Note:Quoted rate is inclusive of any other misc materials required for fixing new fittings

S & F 25 watts LED building security light fittings are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection including necessary fixing arrangements as per site requirements complete all as specified and as directed. Make :- CG model No.LSTS-25-CDL-M or equivalent to Havells/ Philips/ Luker

Supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building security light all as specified and directed .

M & L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

S & F Switch piano type, flush type, single pole one way 16 Amps all as directed.

S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 04 ways and making good to the distrubed surface /walls.

Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed

Supply and fixing of outdoor type Decorative Post top for 360° indirect light with IP 65 protection, resistant to impact and corrosion of 240 v,50hz of capacity 40 watt LED suitable for mounting on 60 mm OD pipe on necessasry PCC works complete all as specified and directed. Make:Cat Part No : LPTO-40-CDL-M of CG or equivalent in Philips /C&S

Supply,laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 2 x 10 sqmm (laid in terenches,ducts,pole,wall etc.) incl taking down old unsv cable all as specified and directed Make : Polycab /Gloster/ Anchor/ Havells/ Finolex

Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 40 mm(OD) x 32 mm (ID) along with connected accessories like couplers.bends,end caps etc. for lT cable protection all as specified and directed. Make:Rex Poly Extrusion Ltd/ Tirupati Plastomatics Pvt Ltd.

M & L for alumimium composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron, cut to shape as required and fixed for fixing the exhaust fan /air ventilation fan on window/ wall all as specified and directed by Engineer-in-charge.

Supply and fix MS flanged pipe 200 mm NB heavy duty thickness not less than 4.8 mm, including all fabrication fittings and joints, cutting/welding/making bend etc at any angle as required length and layed in ground fixed on wall/ floor/ sump etc duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed.

Supply and fix MS flanged pipe 150 mm NB heavy duty thickness not less than 4.8 mm, including all fabrication fittings and joints, cutting/welding/making bend etc at any angle as required length and layed in ground fixed on wall/ floor/ sump etc duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed.

S&F Non return valve flanged type of size 200 mm dia (8") , ISI marked, heavy duty complete all as specified and as directed.

S&F Non return valve flanged type of size 150 mm dia (6") , ISI marked, heavy duty complete all as specified and as directed.

S&F butterfly valve, 200 mm size or bore (8"), ISI marked, heavy duty brass, side handle operated for fire fighting system complete all as specified and as directed.

S&F cast iron sluice valve, 150 mm size or bore, class PN 1.6, ISI marked, heavy duty with brass spindle, operating wheel, flanged on both ends along with suitable new rubber packing (gasket), stainless steel bolts, nuts & washers and necessary modifications if required for fixing in location complete all as specified and as directed.

Supply and fix CI Foot Valve conforming to IS 4038, 200 mm (8”) dia with connected accessories alongwith, nut, bolts, washers complete all as specified & directed.

Supply and fix CI Foot Valve conforming to IS 4038, 150 mm (6”) dia with connected accessories alongwith, nut, bolts, washers complete all as specified & directed.

S & F Pressure gauge 4"dial 0-14 kgs rating all as specified and as directed

M & L for disconnection electric connection, taking down the existing elctric driven pumping set of cap 150 HP alongwith motor and connected pipes of size from its existing foundation without any damage of the equipment all as specified and directed by Engr In Cahrge.

Fixing & installation, commissioning, testing of pumping set of cap 150 HP with motor on new structure/ foundation after assembling of motor & pump, with lazer alingment including connected items i.e. rubber gasket, lubrication etc. and electric connection after installation all as specified and directed by Engr In charge. Note: (a) The pump dismantled under item No 86 shall be re-fixed. (b) The cost for foundation will be paid and measured separately under relevant items.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M & L for RCC nominal mix 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

S&F galvanised iron compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates, nut and bolts complete all as specified and directed

M & L for Bends (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete as specified & directed.

Material & labour for laying of chequered plates by cutting / making in to the shape providing necessary angular supports and handles with 6 mm dia rod as per the site condition for cable trenches of sub-station alongwith painting of one coat of synthetic enamel over a coat of two coats of redoxide all as specified and directed.

bansal construction

M/s Pooja Enterprises

PTech Engineers

A.G.Construction

Sree Tirumala Enterprises

NAVJEEVAN ENTERPRISES

M/S. RUDRA ENTERPRISES