GE/CHM-07/2022-2023 REPAIR OF COMPOUND WALL, FENCING, DRAIN AND CERTAIN MISC B/R ITEMS UNDER AGE B/R II AT CHANDIMANDIR

Amount

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground) complete all as specified.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc including disposal of demolished material complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

Dismantling timber scantling exc 40 Sqcm in section in any position unframed work & removing from site complete all as specified and directed.

Demolition of Textile coverings including frames (if any) and cover fillets (measured flat and not girthed) completed all as specified and directed.

Dismantling of posts or struts of RCC) any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed

Taking down existing barbed wire of any description and removal of the same from site complete all as specified and directed.

Dismantling wrought iron or mild steel as in gates, grills, posts etc or in any description not otherwise provided for, complete all as specified and directed

Dismantlng fencing wire mesh any type complete all as specified and directed

Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed

Site clearance in soft/ loose soil including cutting of bushes & small shrubs etc compelte all as specified and directed.

Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Mild steel round bars 10mm dia and over, cut to length fixed in chain link fencing complete all as specified.

Mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

Mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank 5 to 10mm, complete all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed.

Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-290-O , Gde E-165 fixed complete all as specified and directed.

Refixing only mild steel framed work as in gates including pintle hinges, stops, hand made sliding bolts etc for ornamental and intricate design, including necessary welding work complete all as specified and directed. NOTE : Qty obtained from demolition to be reused

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply and fixing galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and directed.

Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 20 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.

Supply only 3mm dia PVC coated chain link fencing of galvanized steel wire, size of mesh as approved complete all as specified and directed.

15mm thick rendering in cement mortar 1:4 on brick walls or concrete surface and finished fair and even without using extra cement complete all as specified & directed.

Material and labour for coloured non skid porcelain tiles exterior grade 300x300x9-10mm thick heavy duty (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6, including taking out of old tiles, complete all as specified and directed by Engineer-in-charge.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Material and labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 Kilogram / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 Kilogram / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6, except brick complete all as specified & directed.

Material and labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 Kilogram / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

Plain cement concrete type C-1 (1:3:6) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fast, plinth courses and the like finished fair & even, including necessary formwork complete all as specified.

Factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and pigment (in top layer), different colours, laid over and including 25mm thick sand cushioning, taking out old paver blocks, complete all as specified and directed. Notes: The shape/size of paver blocks shall be as approved by the GE.

Factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and no pigment (in top layer), different colours, laid over and including 25mm thick sand cushioning, taking out old paver blocks , complete all as specified and directed. Notes: The shape/size of paver blocks shall be as approved by the GE.

Factory made glazed / polished chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, fixed as in repairs complete all as specified and directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

Factory made M-35 pre- cast concrete man hole covers of size 600mm x 600mm x 75mm with plain faces, including MS frame, set in position, fixed as in repair complete all as specified.

All as per serial item No. 36 hereinbefore but size of manhole covers 750mm x 750mm x 75mm

All as per serial item No. 36 hereinbefore but size of manhole covers 600mm x 1200mm x 100mm

All as per serial item No. 36 hereinbefore but size of manhole covers 600mm x 1100mm x 100mm

All as per serial item No. 36 hereinbefore but size of manhole covers 450mm x 450mm x 75mm

2mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with self tapping screw, bolts, nuts, bituminous washer as in roof, fixed as in repair complete all as specified and directed.

Pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc, fixed as in repair complete all as specified & directed by Engineer-in-charge.

Earthenware designer cladding tile, of size 230mm x 100mm x 15mm thick as in dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10mm thick screed bed in cement mortar 1:4, including taking out of old tiles and removing the debrish complete all as specified and directed.

Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof kerb stone or mud stops cast in situ and rounded or chamfered on edges and similar work, complete all as specified & directed.

Precast plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in kerb stone finished with plain fair faces including chamfers, weatherings, throating etc and setting in mortar 1:6 complete all as specified & directed.

Dhingra Brothers

M/s Super Trading Corporation

M/s Om parkash

MS GURENDER SINGH

VARUN TRADERS

aggarwal contractors and engineers

Satyadev Builders