REPAIRS TO FLOORING,JOINERY,SANITARY FITTINGS, ROOF, PLASTER, FALSE CEILING,PERIODICAL SERVICES ,WELCOME MAINT ,ATT TO CERTAIN MARRIED AND OTM BLDGS IN SION, COTTON GREEN AND COLABA AREA AND OTHER MISC WORKS AT AFS MUMBAI UNDER GE(AF)THANE

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frame) n. exc 1.5 sqm each ,complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from frame) . exc 1.5 sqm & n.exc 4 sqm each ,complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each ,complete all as specified and as directed by Engr-in-charge.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening ,complete all as specified and as directed by Engr-in-charge.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction all as specified.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified and as directed by Engr-in-charge.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, and treated with tar or coal tar black paint, etc ,complete all as specified and as directed by Engr-in-charge.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, and treating ends of posts,backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each with tar or coal tar black paint, etc ,complete all as specified and as directed by Engr-in-charge.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated ,complete all as specified and as directed by Engr-in-charge.

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats ,complete all as specified and as directed by Engr-in-charge.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed ,complete all as specified and as directed by Engr-in-charge.

S&F 200 mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type) ,complete all as specified and as directed by Engr-in-charge.

S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels, commercial type on both sides ,complete all as specified and as directed by Engr-in-charge.

M&L for 25 x 3mm FI hold fasts ,complete all as specified and as directed by Engr-in-charge.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 ,complete all as specified and as directed by Engr-in-charge.

S&F butt hinges mild steel 100 mm long ,complete all as specified and as directed by Engr-in-charge.

S&Faluminium anodised barrel tower bolts 150 mm long extruded section and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolt 200mm long extruded section and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F extruded aluminium alloy handles 100mm long fabricated type, anodised ,complete all as specified and as directed by Engr-in-charge.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised ,complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodised door sliding bolt aldrop 250 mm long ,complete all as specified and as directed by Engr-in-charge.

S & F for Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm,etc ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old wood surfaces of any description over 10cm width of girth applying one coats of synthetic enamel paint etc ,complete all as specified and as directed by Engr-in-charge.

M&L in repair plain fillets, square, rectangular or trianglular in section, clean sawn, secured with nails or brads sectional area exc 3 sqcm & n exc 6 sqcm ,complete all as specified and as directed by Engr-in-charge.

S&F in repair door sliding bolt aldrop 250mm long aluminum anodised ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring ,complete all as specified and as directed by Engr-in-charge.

S & F in repair 200mm, ordinary rat tail rod pattern springs including roller and roller plate ( short type, fighter jet aeroplane shape type),complete all as specified and as directed by Engr-in-charge.

Repairs to shutters of any description n. exc 1 sqm each easing & adjusting without taking down ,complete all as specified and as directed by Engr-in-charge.

Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm ,complete all as specified and as directed by Engr-in-charge.

M&L in repair powder coated aluminum anodized grill of 4.5 x 7.5 mm bar size and 100 mm mesh with aluminium channel fixing of aluminium frame with necessary bolt/screw, or RG 103 or equivalent ,complete all as specified and as directed by Engr-in-charge.

M&L in repair for 5 mm thick frosted sheet glass fixing with aluminum frame with necessary screw/bolt ,complete all as specified and as directed by Engr-in-charge.

Dismantling to Stone slabs and tiles of any description or thickness in floors, aprons windows cills and like etc laid, bedded and pointed in any mortar ,complete all as specified and as directed by Engr-in-charge.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in steps, jambs, pillars, window cills, cooking platforms and like including 10mm thick screed bed in CM 1:6 complete all as specified.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and removing the debris outside MOD Land.

S&F coloured non skid ceramic tiles (square/rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.36 Sqm,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 for receiving floor finish all as specified.

M&L glazed, coloured, ceramic, tiles of size 450mmx300mm x 6 to 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over 10mm thick in CM 1:6 as backing coat to receive dado finish. all as specified and directed.

Taking down 15mm bore steel tubing & connection including cleaning for re-fixing or removal to store ,complete all as specified and as directed by Engr-in-charge.

Taking down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store ,complete all as specified and as directed by Engr-in-charge.

M&Lfor 15mm bore dia medium grade concealed GI tubing with all fittings fixed to walls and ceiling or laid in floors ,complete all as specified and as directed by Engr-in-charge.

M&L cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills sunshades shelves, concealed water tubing or concealed conduit wireing etc and making good cutting exc 10 cm but n. exc 20 cm girth ,complete all as specified and as directed by Engr-in-charge.

M&L for 20mm bore dia medium grade GI tubing with all fittings fixed to walls and ceiling or laid in floors ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair, brass chromium plated shower rose 125mm dia with or without swivel joint , fixed as in repairs ,complete all as specified and as directed by Engr-in-charge.

S&F in repair half turn bib tap 15mm bore chroumium plated cast copper alloy crutch or butter fly handle screwed down screwed for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repair half turn stop cock valve 15mm bore cast copper alloy screwed down high pressure with cruch or butter fly handle screwed both ends for iron pipe ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair, 32mm high density polythylene pipes (HDPE) of pressure rating 6kg/cum fixed complete to walls ceiling or in floors etc fixed,complete all as specified and as directed by Engr-in-charge.

S&F in repair PVC connection pipe of 15 mm bore 600mm long with brass connector ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs orrisa pattern viterious china ware white glazed WC 580x440mm with integral foot rest ,complete all as specified and as directed by Engr-in-charge.

S&F Vitreous China wash down water closet pan(padstal pattern) white (squatting pan & trap including 'P' or 'S' trap connection to drain (or out going pipe, flushing pipe or anti syphonic pipe) etc ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device ,complete all as specified and as directed by Engr-in-charge.

S&F in repair low level flushing system plastic valveless syphonic action type white with inlet ball valve float chain and ball (of capacity 10 ltrs ISI marked inck 32mm PVC flush pipe ,complete all as specified and as directed by Engr-in-charge.

S&F in repair CP tubular Towel rail 20 mm dia, D type 60 cm long between flanges,complete all as specified and as directed by Engr-in-charge.

S&F in repair vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces,complete all as specified and as directed by Engr-in-charge.

S&F in repair half turn CP Pillar taps of 15 mm bore with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shan ks and fly nuts screwed for iron pipe and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches / floors or fixed to walls ,complete all as specified and as directed by Engr-in-charge.

Ditto as per Srl Item No 57.00 above but for 75 mm bore

S&F in repair 110 mm bore PVC (SWR) bends ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 75 mm bore PVC (SWR) bends ,complete all as specified and as directed by Engr-in-charge.

S&F in repair of MS 25 mm dia Drapery curtain rods powder coated decorative type ,complete all as specified and as directed by Engr-in-charge.

S&F in repair MS fancy powder coated brackets for 25 mm dia drapery curtain rods ,complete all as specified and as directed by Engr-in-charge.

S&F in repair Aluminium Door closer hydraulically regulated designation No 3 universal type, Aluminium (extruded section) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F in repairs brass mortice lock 4 levers, vertical type size 100 mm ,complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick wall/stone wall, ceilling, cills, jambs etc, racking out joints, hacking for key & scrubbing with water completely ,complete all as specified and as directed by Engr-in-charge.

Rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surface fair and even ,complete all as specified and as directed by Engr-in-charge.

M&L of 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on surface of ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for Preparing newly plastered surfaces and applying two coats of OBD over a coat of primer on walls ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of chalk whiting on celing ,complete all as specified and as directed by Engr-in-charge.

S&F aluminum anodized windows/doors with necessary accessories/fitting after taking down and refixing after replacement of broken aluminium section, rectification of roller, wiremesh, window panes etc Note : All items used in rectification i.e aluminium sections. glass, wire mesh ,roller etc shall be paid separately under relevent item of Sch A as supply only

Supply only aluminium anodised frame for doors/windows, ventilators and aluminium section with one or more rebates including joining cleat for fixing

Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers.

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples.

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane

M&L for 2nd class hardwood exc 13 & n exc 25 sqcm plain fillets.'square,rectangular or triangular insection, clean sawn, secured with nails or brads,complete all as specified and as directed by Engr-in-charge.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, and treating ends of posts,backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each with tar or coal tar black paint, etc ,complete all as specified and as directed by Engr-in-charge.

S&F for 2nd class hardwood, thickness of shutter in 25 mm, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b);,etc,complete all as specified and as directed by Engr-in-charge.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed ,complete all as specified and as directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm ,complete all as specified and as directed by Engr-in-charge.

S&F sheet glass ordinary quality 3.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and as directed by Engr-in-charge.

S&F 3mm thick figured glass, pin-headed type and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 18 mm thick MDF board, interior grade, prelaminated both side with decorative choice lamination, approved shade fixed with screws to timber frame work etc ,complete all as specified and as directed by Engr-in-charge.

S&F magnetic catches brass body and striking plate with aproved quality ,complete all as specified and as directed by Engr-in-charge.

S&F in repair continuous (Piano) hinges, mild steel bright finish or electro galvanised 40mm width of flaps (when open) ,complete all as specified and as directed by Engr-in-charge.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ,complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground floor) complete all as directed.

M&L for cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate) in floor, foundation, filling and mass concrete ,complete all as specified and as directed by Engr-in-charge.

M&L for coloured Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement with white cement and pigments and cement slurry in floors ,Paving area, including 10 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

S&F coloured light shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

Refixing 15 mm old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified.

Refixing 20 mm old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified.

Dismantling AC/GI sheets as in roof covering is any position complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and using necessary scaffolding complete all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding complete all as specified and directed.

M&L for 6 mm thick asbestos cement, corrugated or semi- corrugated sheets in roofs.fixed with L- type or J- type or cranked hook bolts and using necessary scaffolding complete all as specfied and as directed.

Refixing of old serviceable asbestos cement, corrugated or semi- corrugated sheets in roofs.fixed with L- type or J- type or cranked hook bolts and using necessary scaffolding complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position unframed work complete all as specified and as directed.

M&L for Second class HW as in scantiling timber framed and fixed in any position complete all as specified and as directed.

S&F rolled sections with ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade Yst 240 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L preparation of new or previously untreated steel surfaces with two coat of synthetic enamel paint using red oxide primer on steel members ,complete all as specified and as directed by Engr-in-charge.

Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including cover fillets complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as spd and directed.

S & F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre etc including Hanger of 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and fixing Gypsum Board 10mm thick in ceiling fixed with screw as per manufacturers instructions etc ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new Gypsum board surfaces on ceiling and filled the joint gaps with wall care putty. Thereafter, applying two coats of oil bound distemper over a coat of primer,complete all as specified and as directed by Engr-in-charge.

S&F in repairs 06 mm thick Plywood, grade BWP, type BB fixed to timber/GI/Aluminium/Steel frame work with screws or like, complete in ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new surfaces of plywood and applying two coats of synthetic enamel paint over a coat of priming paint surface in ceiling,complete all as specified and as directed by Engr-in-charge.

M&L preparation of old surface and apply one coat of oil bound distemper on ceiling,complete all as specified and as directed by Engr-in-charge.

Dismantling of cement concrete of any description and in any position not otherwise specifically provided for including old tarfelt etc ,complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate ) in roof padding ,complete all as specified and as directed by Engr-in-charge.

M&L for wire brushing and cleaning top surface of tiles lime terracing or cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.70 kg per sqm ,complete all as specified and as directed by Engr-in-charge.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by torch application includes two coat of aluminium paint complete all as specified and as directed.

M&L 10 mm thick plaster in cm 1:4 mixed with WPC on top of roof including raking out old surface ,complete all as directed by Engineer-in-Charge. (WPC will be measured separately)

M&L preparing surfaces of roof old painted surface or previosuly untreated surface applying 1 coats of aluminium paint on old surface,complete all as specified and as directed by Engr-in-charge.

M&L for two layers plaster on external surfaces of wall, first layer 10 mm thick in CM (1:6) on other than fair faces of brick or concrete surfaces. Second layer (setting coat/finishing coat) 5 mm thick in CM (1:4) with approved water proofing compound with sand texture finish ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new/old plastered surfaces of wall, chajjas in any position and applying two coats of external weather coat emulsion paint of approved make and shade incl a coat of weather coat primer all as per manufacturer's instr and directions including 10 m height scaffolding ,complete all as specified and as directed by Engr-in-charge.

S&F plain alluminium sheeting alloy 31000 H4 to bottom of wooden shutter ,complete all as specified and as directed by Engr-in-charge.

Cleaning the existing holes on AC sheets and fixed M seal, washer etc to stop the leakage to the entire satisfaction of Engr-in-charge.

Removing & Cleaning of existing Cover concrete carefully by low impact high frequency hammer without damaging the existing concrete including cleaning the surfaces by air jet etc,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and applying Alkaline rust remover to the existing reinforcement and cleaning the reinforcement clearly with the wire brush ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and applying the zinc chromatic primer on existing reinforcement with the brush in two coat ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and applying structural grade Polymer bond coat prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application etc. ,complete all as specified and as directed by Engr-in-charge.

M&L for repairing spalled concrete by self compacting, ugh early compresive strength (3days 30 Mpa & 7 Days 50 Mpa minimuim) concrete upto 50mm thick by pouring in suitable form work usung funnel or hose pipe with water/powder mix as per manufacture instruction ,complete all as specified and as directed by Engr-in-charge.

M&L for repairing the damaged concrete portion by average 20mm thick polymer plaster @ a dose of 5% in ratio 1:3(CM) over the exposed non structural member surfaces including making the surface evenly smooth etc as per manufactureres instruction (meaurement on the basis of finished area) ,complete all as specified and as directed by Engr-in-charge.

M&L for preparing newly plastered surfaces of walls applying two coats of oil bound distemper over a coat of alkali-resistant priming paint on walls ,complete all as specified and as directed by Engr-in-charge.

M&L 3mm thick wall care putty on wall ,etc completed all as specified.

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land ,complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified & directed by Engr-in-charge.

Cleaning of PVC tank of capacity exc 500 Ltrs and & n exc 1000 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing ,complete all as specified and as directed by Engr-in-charge.

Cleaning of PVC tank of capacity exc 1000 Ltrs but n exc 2000 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing ,complete all as specified and as directed by Engr-in-charge.

Removing of vegetation / plantation on the wall of multiple storey building including necessary scaffolding and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

S&F in repair water tank cover for capacity 500 lit to 2000 lit as per site requirement of any make as approved by BMC fixed with washer and bolt locking device etc. wt of cover not less than 2.4 kg other all as specified and directed by Engr-in-Charge.

M&L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds ,efflorences and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered or unplastered old surfaces of walls and apply two coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparaing plastered or unplastered surfaces of old ceiling including brooming down or steel wire brushing, scraping down smoke or soot moulds ,efflorences and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered or unplastered old surfaces of walls and apply one coat of colour wash complete all as specified and directed by Engr-in-Charge.

M&L for washing, rubbing down and stopping of old distemper and painted surfaces of walls and apply one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described and apply one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparing old plastered surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over a coat of alkali resistant primimg panit complete all as specified and directed by Engr-in-Charge.

M&L for preparing old plastered surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over wall care putty complete all as specified and directed by Engr-in-Charge. Note:- Wall care putty shall be measured and paid seperately.

M&L for preparing old plaster surfaces including washing, rubbing down and stopping of distempered and painted surfaces apply two coats of oil bound distemper over wall care putty on ceiling complete all as specified and directed by Engr-in-Charge. Note:- Wall care putty shall be measured and paid seperately.

M&L 3mm thick wall care putty on ceiling ,etc completed all as specified and directed by Engr-in-Charge.

M&L for preparing old plaster surfaces of walls and apply one coat of cement base paint complete all as specified and directed by Engr-in-Charge.

Supply only waterproofing compound etc complete all as specified and directed by Engr-in-Charge.

M&L for Complete removal of existing treatment and applying 3mm thick wall care putty on wall ,etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new surfaces of wall care putty of walls and applying two coats of oil bound distemper over a coat of alkali-resistant priming paint on plastered surrface all as specified and directed by Engr-in-Charge.

M&L for complete removal on existing treatment surfaces of wall chajjas etc in any position washing down with water and treating the surface from all loose dirt chalk grease fungi algali flakes etc filling up all cracks and defects with CM 1:3 and applying two coats of external weather coat emulsion paint of approved make and shade incl a coat of weather coat primer all as per manufacturer's instr and directions including scaffolding complete all as directed by GE/Engr in Charge.

M&L for preparation of old surfaces and apply one coat of weather coat emulsion paint of approved make all as per manufacturer's instr and directions including scaffolding complete all as directed by GE/Engr in Charge.

M&L for Writing letters or figures (Block. Roman, Italic or Indian) ,complete all as specified and as directed by Engr-in-charge.

M & L for Stops, commas, short lines, dashes, hyphens, brackets etc completed all as spd and directed.

M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds ,efflorences and trading oil and greasy spots and applying one coat of Oil bound distemper on ceilngs ,complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm dia Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed ,complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm dia Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC 40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 15mm dia health faucet with 1.5 mtr tube & hook ,complete all as specified and as directed by Engr-in-charge.

S & F in repair for Butt hinges 75 mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22, etc ,complete all as specified and as directed by Engr-in-charge.

M& L for Post construction Anti termite treatment by Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. and make good surfaces complete all as specified and directed by Engr-in-Charge.

M&L for Post construction Anti termite treatment by chemical emulsion Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. and sealing the same to match existing finish drilled holes will be sealed and made good using cement complete all as specified and directed by Engr-in-Charge.

M& L for Post construction Anti termite treatment by chemical emulsion as approved make Treatment of soil under existing internal floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors finish complete all as specified and directed by Engr-in-Charge.

M& L for Post construction Anti termite treatment by chemical emulsion as approved make Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors finish complete all as specified and directed by Engr-in-Charge.

M&L for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same to existing Surface complete all as specified and directed by Engr-in-Charge.

Labour for Cleaning/clear of blockage of manholes, gully traps, floor traps, vertical soil/waste pipe of different dia and sewage line in the area cotton green,sion & colaba of the AF Station Mumbai by providing and deployment of 02 (TWO) Nos of Labours per day including Sundays and Holidays. Note : a) The labour (02 nos) will report daily at 0845 hrs on all working days including Sundays and holidays at complaint cell centre to attend complaints given by Engr -In- Charge . Complaints needs to be cleared within 24 hrs after receiving the complaints. The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc.) scaffolding ladders any other materials required to clear the blockages at the site without any extra cost .Labour for cleaning of sludge from sewage lines (any dia) to manhole is included in quoted rates. In case any labour does not report to Engineer In Charge for the whole day or found missing more than half an hour on any day, Panel recovery @ RS.1500/- per head per day shall be made proportionally from contractor's dues. b) The recovery will be made from the contractor @250 Rs per complaint which are not cleared within 24 hrs from the date and time of receipt of complaints. Decision of Engr-In- Charge is final in this respect. Two persons will be provided by the contractor at site. The above item includes conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints including removal of sludge from the site outside MOD land to a distance not exc 5km (The department shall not be liable to provide any kind/form of transportation to the labour). (c) Registers of labour attendance and complaints slips shall be maintained by contractor at their own cost, which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor's representative ,JE(civil) and Engineer in charge.

Opening cover of septic tank, de watering and taking out night soil/excreta sludge etc from septic tank and removing sludge outside MD land and cleaning the septic tank as per BMC rules and placing the cover in original position all as directed.

Systematically cleaning of 150mm dia pipe sewers/drains by passing rope, knots, bamboos, kempt and disc of required size from manholes to manholes, septic tank and well flushing after cleaning sewer line/drain pipe with water (excluding manholes and septic tanks) including safety measures such as test for existence of poisionous gas etc,complete all as specified and directed.

Ditto as per Srl Item No 162.00 above but for 200 mm dia pipe

Demolition of pre cast reinforced concrete manhole cover of any description and any position not otherwise specifically provided for and removing demolished materials outside MOD Land ,complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin arches, pillars etc but excluding ashlars facings, dressed stone work and pre cast concrete articles and depositing the debris outside MOD Land ,complete all as specified and directed.

Excavation in trenches not exceeding 1.5m ;wide and n.exc 1.5m in depth for foundation etc or shafts. Wells etc not exceeding 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil ,complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing of excavated material i.e soil exc. 5 Km out side MD land complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land complete all as directed by Engineer-in-Charge.

Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land ,complete all as directed by Engineer-in-Charge.

M&L for cement Concrete bed to drain pipe size 150 mm dia including packing under and completely surronding pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) ,complete all as specified and directed.

M&L cement Concrete bed to drain pipe size 100 mm dia including packing under and completely surronding pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate),complete all as specified.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars, for 150mm dia pipe soil ,complete all as directed by Engineer-in-Charge.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars,for 100 mm dia pipe ,complete all as directed by Engineer-in-Charge.

Supply and fix in repairs of salt glazed stone ware gully traps square or round mouthed type ‘P’ of size 150mmx100mm ,complete all as directed by Engineer-in-Charge.

Rendering 15mm thick on fair faces of stone/brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement including 10m height of scaffolding and finished even and smooth without using extra cement complete all as specified . Note : Water proofing compound shall be measured and paid separately

M&L for Cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) as in coping, for manholes etc including weathering slightly rounded or chamfered angles and throating including necessary formwork as direct by Engineer –in-Charge.

M&L for Pre cast cement concrete M30 as in manhole cover of any section with fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:4) complete including use and waste of formwork ,complete all as directed by Engineer-in-Charge.

M&L for TMT steel bar n.exc 10mm dia cut to length bent to shape required including cranking ,bending, spirally for hopping for colomns, hopping ends and binding with MS wire (annealed, not less than 0.9mm dia) ,complete all as directed by Engineer-in-Charge.

M&L in repair Cast iron floor trap, with grating including jointing to waste pipe in run lead, diameter of outlet 75mm ,complete all as directed by Engineer-in-Charge.

S&F in repairs 110 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal ,complete all as directed by Engineer-in-Charge.

S&F in repairs 75 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal ,complete all as directed by Engineer-in-Charge.

S&F in repairs 110 mm bore PVC (SWR) junction ,single (single T) equal or unequal ,complete all as directed by Engineer-in-Charge.

S&F in repairs 75 mm bore PVC (SWR) junction ,single (single T) equal or unequal ,complete all as directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) reducers ,complete all as directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) vent cowl ,complete all as directed by Engineer-in-Charge.

S&F 75 mm bore PVC (SWR) vent cowl ,complete all as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for ,complete all as directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for chajjas or simillar wks ,complete all as directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span ,complete all as directed by Engineer-in-Charge.

M&L for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl sup-posts, overhang etc, also splays bet floor and beams etc ,complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for Columns, pillars, piers,posts and struts ,complete all as directed by Engineer-in-Charge.

M&L for formwork to sides of pillars, posts, columns, piers and stanchions in square, rectangular fair finished surface of concrete,complete all as directed by Engineer-in-Charge.

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia ,complete all as directed by Engineer-in-Charge.

Cleaning of PVC tank of capacity exc 250 Ltrs and up to and including 500 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing complete.

S&F in repair 500 Liters capacity double layer, rotational molded, polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including fixing only ball valves,complete all as directed by Engineer-in-Charge.

S&F in repair 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position upto 10m height of slab all as specified in SSR Part I ,complete all as directed by Engineer-in-Charge.

S&F in repairs Rotational moulded polyethylene water storage tanks 2000 Litres capacity (cylindrical vertical with closed top) hoisted and fixed in position upto roof height 20m all as specified in SSR Part I, ,complete all as directed by Engineer-in-Charge.

Refixing old serviceable float valve upto 25mm bore obtained from dismantling ,complete all as directed by Engineer-in-Charge.

S&F in repairs 15 mm size bib tap cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm size pillar taps swan neck , cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm size brass chromium plated single hole basin mixer for mixing hot & cold water screwed down for iron pipe ,complete all as directed by Engineer-in-Charge.

S&F in repair 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe ,complete all as directed by Engineer-in-Charge.

S&F in repair brass spindle with nylone washer to existing 15 mm size chromium plated bib taps, Pillar taps, stop cock or angle valve of any type ,complete all as directed by Engineer-in-Charge.

S&F in repair unserviceable existing bib taps, Pillar taps, stop cock or angle valve of any type & size incl replacement of nylon washer , teflon tape etc ,complete all as directed by Engineer-in-Charge.

S&F in repair 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, including taking down old stop valve ,complete all as directed by Engineer-in-Charge.

S&F in repair 20 mm size ball valves [Minimum weight for 20 mm – 210 gms] high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe,complete all as directed by Engineer-in-Charge.

S&F grating doom 150 x 150 mm of brass chromium plated, including taking down old grating doom ,complete all as directed by Engineer-in-Charge.

S&F PVC connection 15 mm size with PTMT nuts on both end, length 450 mm, including taking down old PVC connection,complete all as directed by Engineer-in-Charge. .

S & F in repairs syphonic set for vitreous china low level flushing cistern of any capacity ,complete all as directed by Engineer-in-Charge. .

S&F in repairs the internal fitting kit complete suitable for 10 to 15 ltr PVC low level flushing cistern ,complete all as directed by Engineer-in-Charge. .

S&F vitreous china white Table top wash basin in repairs having size 450mm x 400mm x 160 mm , Rectangle bowl, Snow White in colour , Make:- CERA , Cat No. : S2020101 ,complete all as directed by Engineer-in-Charge.

S & F in repairs 15 mm size Kitchen sink faucet with pull down sprayer in stainless steel Dratal pull out sprayer faucet kitchen flexi spout brushed steel (DT-1) ( item diamentions - 32cm X 8cm x 8cm )complete all as specified and as directed.

S&F in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing ,complete all as directed by Engineer-in-Charge.

Supply and fix in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, fixed ,complete all as directed by Engineer-in-Charge.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink ,complete all as directed by Engineer-in-Charge.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink ,complete all as directed by Engineer-in-Charge.

Supply and fix in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook ,complete all as directed by Engineer-in-Charge.

S&F in repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm )etc ,complete all as directed by Engineer-in-Charge.

S&F in repairs 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm )etc ,complete all as directed by Engineer-in-Charge.

S&F in repairs Teflon tape adhesive sealant length 10 m , width 1.5 cm ,complete all as directed by Engineer-in-Charge.

S&F in repairs Vitreous china EWC wall mounted (white) incl taking down old water closet and refixing with seat cover,low level flushing cistern incl flushing kit, brackets for fixing ,making good existing surface etc ,complete all as directed by Engineer-in-Charge.

S&F in repairs Stainless steel plate rack ,minimum 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc ,complete all as directed by Engineer-in-Charge. .

S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe ,complete all as directed by Engineer-in-Charge.

S&F in repairs PVC 160 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) bends 160 mm bore any radius ,complete all as directed by Engineer-in-Charge.

S & F in repairs PVC 110mm bore (SWR) coupler ,complete all as directed by Engineer-in-Charge.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm ,complete all as directed by Engineer-in-Charge.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm ,complete all as directed by Engineer-in-Charge.

M& L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4. ,complete all as directed by Engineer-in-Charge.

M & L for cutting out bricks, forming jambs ,toothing for and bondinng new into old work incl value of new materials entering old walls and jointing and pointing in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick cement plaster on Brick or concrete surfaces in CM 1:6 ,complete all as directed by Engineer-in-Charge.

M&L for light shade vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floor & skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 for floor and 10 mm thick backing coat in CM 1:4 for Skirting ,complete all as directed by Engineer-in-Charge.

M&L for Vitrified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.45 sqm but not exceeding 1.00 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cementto match over 15 mm thick screed bed in CM 1:6 for floor and 10 mm thick backing coat in CM 1:4 for Skirting ,complete all as directed by Engineer-in-Charge.

M&L for 900x450x7mm thick glazed coloured ceramic tiles as in vertical surface and jointed in neat cement slurry and pointed in white or coloured cement to match pattern over 10 mm thick backing coat in CM 1:4 ,complete all as directed by Engineer-in-Charge.

M& L for Non- skid Ceramic Coloured tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 ,complete all as directed by Engineer-in-Charge.

S & F in repairs overall 100mm thick gypsum partition max upto 3.66 m height including layer of tapered edge 12.5mm thick plain Gypsum Board screwed fixed with drywll screws to either side of 70mm GI C stud (0.50mm thick & size 70MMX34MM36MMX6MM) placed vertically at 610mm centre to centre in 72mm G.I. floor & ceilng channel (0.50mm Thk & Size 72X32X32) fixed at top & bottom using suitable self tapping screws /metal screws. 50mm thk Rockwoool of 48 Kg density to be inserted as infill material between the partition, fixed board with staggered joints. Edges of all boards to be taper finished, joints finished incl. filling finishing using jointing Compound also 3mm thick putty on external surface with 1 coat of primer and 2 coat of Oil bound distemper complete all as specified and as directed by Engr-in- Charge.

S&F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws ,complete all as directed by Engineer-in-Charge.

Note for all Item Included in BOQ: 1.The contractor shall deploy skilled tradesman i.e. carpenter, plumber , mason , welder etc with his helper. All workers need to be having police verification for Airport entry (MIAL)/ for Defence area entry and required T&P , and collect the complaints slips daily morning from cotton green office / AGE B/R (AF) Kalina office by the contractor/supervisor and same shall be resubmitted at evening within completion of job duly signed by user. 2.In case of failure to attend the complaint within 48 hrs the contractor shall be charged @400 Rs per complaint against outstanding complaint. 3.After Perodical service of the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown away from MOD land without any extra cost.

S K ENTERPRISES

NS Enterprises

M/s Qureshi Construction Co

Xcel Industries

OM SAI CONSTRUCTION

ABABEEL CONSTRUCTION

Nisa Enterprises