CERTAIN MISC B/R REPAIRS TO MH AND AMC UNIT OF AMC UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Supply and fixing Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof ridge, fixed with self tapping screws as specified and directed.

Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Material and labour for 6mm thick asbestos cement fibre corrugated/ semi corrugated sheets as in roof coverings fixed with L-type or J-type hooks or cranked bolts complete all as specified and directed.

Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified

Supply and fixing providing and fixing perforated gypsum board 12mm thick in ceiling fixed with as per manufacturers instruction purpose, 60x60cm size fixed with powder coated GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n.exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, including necessary GI wire hangers 2mm dia for security frame work to ceiling, and also including necessary notching complete all as specified and directed

Material and labour for providing and fixing 12mm thick gypsum board in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed

Supply and fixing providing and fixing PVC 4mm thick in ceiling fixed with as per manufacturers instruction purpose, 60x60cm size fixed with powder coated GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n.exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, including necessary GI wire hangers 2mm dia for security frame work to ceiling, and also including necessary notching complete all as specified and directed

Material and labour for hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive frame as per specifications and drawing

Demolition of cement concrete in ground floor and paving/ sunken portion (below or above ground level) complete all as specified and directed.

Material and labour cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in filling in sunken portion and mass concrete complete all as specified and directed.

Material and labour for bitumen primer for use in waterproofing and dam-proofing treatment @ of 0.3 Ltr/ Sqm complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg/ Sqm complete all as specified and directed.

Material and labour for APP modified polymeric water proofing membrane shall be 3mm thick having weight not less than 3.6 Kg/ sqm, APP modified polymeric water proofing membrane shall five layered with centre core of 100 micron HMHDPE film complete all as specified and directed.

Material and labour 15mm thick rendering in cement plaster on brick or concrete surfaces in cement mortar (1:3) in two layer of 10mm & 5mm mixed with integral water proofing compound @ 3% by weight of cement in top 5mm thick and finishing the surface even and smooth using extra cement including cutting grooves with thread complete all as specified and directed. (WPC shall be measured and paid separately).

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Material and labour 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified & directed.

Taking down cement plaster on brick/stone masonry any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Material and labour 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 12mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material and labour 5mm thick cement plaster in cement mortar (1:3) as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished fair and even to receive topping floor finish/ layer complete all as specified & directed.

Material and labour sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over complete all as specified and directed.

Material and labour for rubber moulded coloured cement concrete chequered tiles 300 x 300 x 22mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floor including 15mm thick screed bed to floor finishes in CM (1:4) complete all as specified and directed

Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but n. exc. 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) and neat cement slurry with 3 Kg/ Sqm complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 300 x 200 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour for 18-20mm thick machine cut Kota stone slab flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed Note : Work to be executed at 3rd floor of MH building and contractor has to make his own arrangement for shifting of material on 3rd Floor. Unit rate quoted to be deemed inclusive of these aspects.

All as per item No 34.00 but as in skirting laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.

Material and labour vitrified ceramic tiles 10mm thick, any shade as approved, polished area of each tiles n.exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick rendering in cement mortar (1:6) to fix tiles complete all as specified and directed.

Material and labour vitrified ceramic tiles 10mm thick, any shade as approved, polished area of each tiles n.exc. 0.36 Sqm (square/ rectangular) in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Supply and fixing health faucet with 600mm long flexible pipe complete all as specified and directed.

Material and labour for 18-20mm thick makrana white marble work (table rubbed and polished) as in steps, jambs, cills, pillars, cooking platform and like in set cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of marble work including rounding of exposed edges of marble complete all as specified and directed

Material and labour 16 to 18mm thick pre polished green marble as in cooking platform laid over 10mm thick screed in cement mortar (1:4) including making of hole for LPG pipe and chamfering the corners complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 metre mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Srl Item No. 42.00 here-in-before but except brick

Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

Material and labour preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over one coat of primer complete all as specified and directed.

Material and labour preparation of newly plastered surface of ceiling and applying two coat of oil emulsion distemper over one coat of primer complete all as specified and directed.

Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each door/ window complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each door/ window complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm complete all as specified and directed.

Taking down shutters of any description exc 2 sqm complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm and n. exc. 2.00 sqm and re-fixing in the same opening complete all as specified and directed.

Taking down shutters of any description exc. 2.00 sqm and re-fixing in the same opening complete all as specified and directed.

Supply and fixing pressed steel door frame of size 125mm x 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed

Material and labour PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in filling in hollow pressed steel door frame complete all as specified and directed.

Material and labour 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing 40mm thick flush shutters, solid core construction, with block board core and commercial type plywood face panels on both sides complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Material and labour galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed complete all as specified and directed.

Material and labour 12mm thick pre-laminated particle board, exterior grade, pre-laminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

Material and labour in repairs 18/19mm thick block boards, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame work including two coats of synthetic enamel paint over a coat of pink primer and teak wood leaping all around the edges complete all as specified and directed.

Supply and fixing 100mm size butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed complete all as specified and directed.

Supply and fixing 100mm size butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed in repairs complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing in repairs 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing in repairs 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing 200mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing in repairs 200mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing aluminium handle cast type anodised 150mm long complete all as specified and directed.

Supply and fixing in repair aluminium handle cast type anodised 150mm long complete all as specified and directed.

Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Supply and fixing in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 75mm complete all as specified.

Supply and fixing in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 75mm complete all as specified.

Supply and fixing aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

Supply and fixing mild steel 150mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed in repairs complete all as specified and directed.

Material and labour 25mm dia mild steel pipe curtain rod with powder coating (wooden finish) heavy duty superior quality curtain rod with brackets, stops rollers etc as approved by GE complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Supply and fixing rolled section as in main and cross beams, hip and jack rafter, purlins, connected to common rafters, fixed with cleats and plates etc conforming to Fe-290. Gde-E-165 including one shop coat of zinc chromate primer paint including preparation of surface before fabrication all as specified and directed.

Material and labour mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed.

Supply and fixing steel window 1.25mm thick box type (primer coated) ERW hollow P-section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter:- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mm x 12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grill/ flat iron and glass panes/ wire mesh shall be measured and paid separately under respective item of this BOQ.

All as per Ser item No. 88.00 but gauged shutters without sash bars.

All as per Ser item No. 88.00 but as in ventilators

Material and labour preparation of new wooden or wood based surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

All as per item No 91.00 but applying one coat on old surface.

Material and labour preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

All as per item No 93.00 but one coat on old surface

Material and labour hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.

Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty in squares exc. 0.50 sqm in each pane complete all as specified and directed.

Material and labour 5mm thick sheet glass ordinary quality and glazing with oil putty in squares exc. 0.50 sqm in each pane complete all as specified and directed.

Material and labour 3mm thick frosted sheet glass ordinary quality and glazing with oil putty in squares exc. 0.50 Sqm in each pane complete all as specified and directed.

Taking down old GI tubing 15mm bore and connections including fittings complete all as specified.

Taking down old GI tubing 20mm bore and connections including fittings complete all as specified.

Material and labour cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth in brick walls complete all as specified and directed.

Supply and fixing 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Supply and fixing 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour refixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Material and labour refixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Supply and fixing 15mm angle/ stop valves, fancy type chromium plated, screwed down , high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe fixed in repair complete all as specified and directed.

Supply and fixing in repairs bib taps, cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for 15mm bore iron pipe complete all as specified and directed.

Supply and fixing in repairs bib taps, cast copper alloy, chromium plated, long handle minimum 300mm long fancy type (for Hospital) with capstan headed, screwed down, screwed for 15mm bore iron pipe complete all as specified and directed.

Supply and fixing in repair 15mm bore standard PTMT bib tap of any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

Supply and fixing in repairs plastic water closet seat cover (White) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging devices complete all as specified.

Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) fixed including provision of lime concrete bedding etc. complete all as specified and directed.

Supply and fixing in repairs brass CP wall mixer for mixing hot & cold water screwed down for 15mm dia iron pipe complete all as specified and directed.

Supply and fixing in repairs brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe 600mm long alongwith complete necessary fittings all as specified and directed

Supply and fixing CP glass corner shelf single complete all as specified and directed

Supply and fixing in repair hot and cold WHB mixer fancy type single or double legged of brass chromium plated, screwed down high pressure, screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed to wash hand basin complete all as specified and directed.

Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe, fixed in repairs complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminized hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415m to 445m long flexible pipe complete all as specified and directed.

Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper fixed on existing brackets, fixed in repairs complete all as specified and directed.

Supply and fixing in repair vitreous china urinal half stall type, white including connection to flushing pipe and outgoing pipe complete all as specified and directed.

Supply and fixing in repairs chromium plated brass shower rose with swivel joints of size 150mm x 150mm fixed to pipe complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe complete all as specified and directed.

Supply and fixing in repair sink without drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

Supply and fixing soap dish 160mm x 160mm x 90mm stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified.

Supply and fixing in repair 32mm dia PVC waste pipe for WHB all as specified and directed.

Dismantling of water tanks any type of capacity exc 500 ltrs and n.exc 1000 ltrs and removing to store complete all as specified and directed

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR (Part-I), all as specified & directed.

Dismantling of water tanks any type of capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed

Supply and fixing rotational moulded polyethylene water storage tanks, 500 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR (Part-I), fixed in repairs complete all as specified & directed.

Material and labour ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fixing stop valves 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

Supply and fixing providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., complete all as specified.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) multi floor trap with grating including jointing solvent cement 75mm dia of outlet complete all as specified and directed.

Material and labour 125 x 110mm PVC (SWR) gully trap setting and jointing with solvent cement fixed in repairs complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed

Material and labour precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cover slab for drain, lintels, beams, in floors, roofs, landing, balconies, canopies and shelves and including necessary form work complete all as specified and directed

Material and labour mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per Srl Item No. 145.00 here-in-before but except tiles

Material and labour for raking out joints/ pointing in cement mortar to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc complete all as specified and directed

Material and labour for polycarbonate plain sheeting 10mm thickness with side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed

Material and labour for 12mm toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, suitable 2 Nos handles, hinges/ clip & double action floor spring complete all as manufacture instruction

M/S Vinod Kumar

THAPAR CONSTRUCTION COMPANY

FRIENDS ENGINEERS