WBPWD/KSHD/EE/NIQ-11 OF 2023-2024_SL.02

Amount

Supplying erection, testing & commissioning of Electric Motor Driven Horizontal, centrifugal Fire pump of capacity 2850 LPH. at 88 MWC, 2900 RPM of Kirloskar make with coupling & coupling guard, base frame as necessary foundation in all complete as per specification and direction of the Engineer-in-charge. (TFC Motor & Bronze impeller)

Supplying erection, testing & commissioning of Electric Motor Driven Horizontal, centrifugal Jockey pump of capacity 11.0 m3 / hrs. at 88 MWC, 2900 RPM of Kirloskar / KSB / Mathur & Platt make with coupling & coupling guard, base frame as necessary foundation in all complete as per specification and direction of the Engineer-in-charge. (TFC Motor & Bronze impeller)

Supplying erection, testing of heavy grade(class - C) pipes conforming to IS-1239/IS-3589including all fittings viz tees, elbow reducers union, flanges, robber gasket, GI nuts bolts, washer and structural steels for pipe supports. Hanger support with anchor fasteners and clamp shall be supplied to fix the pipes celling wall etc. Including supporting/fixing the pipe on floor/wall/celling with clamps hanger (using anchor fasteners) as per specification. Cutting of floors, walls etc and making it good after erection of pipes shall be vendor's scope. Neccessary painting with 2 coats of primer and 2 coats of synthetic enamel to be done and supply of paints shall be with vendor's scope. 200 mm NB (6 mm thick suction of pump)

Supplying laying testing and commissioning of FLRS, PVC outer sheath, steel armoured, aluminium/copper conducter, 1100 volt grade power cable with gland etc. The cable shall be laid in tray/hume pipe/in exacavation providing brick and sand protection, reffiling and compacting the earth.

Earthing with G.I earth pipe 4.5 m long,40 mm dia. Including accessories and providing masonry enclosurewith cover plate having locking arrangement and watering pipe etc. with charcoal coke and salt as required.

Supplying, fitting, fixing of Pressure gauge with half coupling, nipple, root valve adapter, 3-way gauge cock, vibration dampner as per specification and direction of the Engineer-in-charge complete in all respect.

Supplying, fitting, fixing of Pressure switch with half coupling, nipple, root valve adapter, 3-way gauge cock, vibration dampner as per specification and direction of the Engineer-in-charge complete in all respect.

Supplying, fitting, fixing & commissioning of MCC cum annunciation panel as per specification and satisfaction of the Engineer-in-charge.

Supplying & fixing of Power cable Power cable (3 1/2C x 90 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge

Supplying & fixing of Power cable Power cable (3 1/2C x 16 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge.

Supplying & fixing of Control cable and cable tray (10C x 1.5 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge.

Supplying & fixing of Control cable and cable tray (2C x 1.5 mm2 Armoured Cable) as per requirement and satisfaction of the Engineer-in-charge.

Supplying, fitting & fixing cast iron Air Release valve of approved brand and make bearing ISI Marking tested to 21 Kg. Per cm. Sqm. 25 mm NB with root valve (ball type)

Supply fixing & fitting of SS Hydrant valve (ISI marked) single headed Type -A with stand pipe and bend for outdoor hydrants as per specification and direction of the Engineer-in-chare all complete.

CAST IRON NON-RETURN VALVE : Supply, erection, testing & Commission of Cast Iron double flanged Non return valve (IS: 5312) following sizes conforming to relevant IS: specifications and tested for a minimum pressure of 16Kg/Sq.cm. for sheet and 24 Kg/sq.cm. for shell including providing and fixing Nuts & Bolts gaskets. Washers etc. complete as required. 150 mm NB

Supplying, fitting & fixing GM Ball valve as per BS:5351 and make bearing ISI Marking all complete as per direction of the Engineer-in-Charge. 25 mm NB

BUTTERFLY VALVE : Supply, erection, testing and commissioning of ISI marked Butterfly Valve of rating PN 1.6 with bronze/gunmetal seat complete with Nuts & Bolts, Gaskets conforming to IS-13095 of following sizes as required. 80 mm NB (Wafer type)

CAST IRON GATE VALVE : Supplying, fitting & fixing Sluice valve PN 1.6 NB Rising Stem conforming of approved brand and make with companion Flanges, Nut & bolts etc. all complete bearing IS 14846. 150 mm NB

FAST RESPONSE SPRINKLER HEAD Supply fitting & fixing Pendent type fast response sprinkler head bearing ISI marking all complete.

Supply fitting & fixing flexible sprinkler head 1.00 mtr long bearing ISI marking all complete.

PVC Priming Tank with Accessories Cap. 500 ltr. The priming tank would be connected with over head tank through float valve. Level gauge to be provided. Overflow pipeline to be extended upto the nearest surface drain. No electrical instrument or control valve is envisaged excepting for level switch. The scope would include providing 1 Nos. of priming tank or 1000 ltr. Capacity complete with the following: (a) Inlet valve (Globe type) (b) Pressure reduction arrangement. (c) Float valve arrangement (d) Drain valve arrangement. (e) Manhole. (f) Overflow arrangement.

Applying Two coats painting with best quality synthetic enamel paint over two coats of Zinc chromet primming including smoothening the surface by sand papering and grinding the pipe jonints where necessary.

SWAMIJI ENGINEERS CO OPERATIVE SOCIETY LTD

N P FIRE SAFETY SOLUTION AND CONSULTANCY