REPAIR AND MAINT OF INTERNAL ELECTRIFICATION OF OTM AND MD ACCN AND LT OH LINE, UG CABLE, SECURITY LIGHT ETC IN 506 ABW, OFFICER MD ACCN AREA UNDER AGE EM (EAST) OF GE (EAST) JABALPUR

Amount

Dismantling carefully the existing U/S LT Overhead line ACSR conductor of any size from its position by necessary disconnecting of conductor complete all as specified and directed by Engr-in-Charge.

Supply and stringing, stretching and fixing ACSR conductor for over head line securing on pole complete including binding wire ,jointing sleeves aluminium tap and PG clamp etc of any size all as specified and as directed.

Fixing only/stringing only old dismantled ACSR conductor for over head line securing on pole complete including binding wire, etc of any size complete all as specified and as directed.

Note for item 2 & 3 Jumper on cut point/2 pole structure/4 pole structure shall be provided with PVC insulated sleeves. Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.

Removing /opening of binding from shackle/pin insulator and restringing of single conductor, tightening of LT over head ACSR /copper conductor any size including binding with copper /aluminium binding wire to over head conductor including renewal of jumpers complete all as specified Note:- Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.

Dismantling existing u/s guard wire with cradles of any size from LT OH line and removing from site of work complete all as directed by Engr-in-Charge.

S&F GI steel continuous earth wire & cradle 4mm dia on cross arms of poles for guarding including binding with aluminum wire 16 SWG etc. complete all as specified and directed by Engr-in-Charge.

Dismantling of U/S insulators of any size and type complete from its position and removing all as directed by Engr-in-Charge.

Fixing only old LT pin type insulator obtained from item No 08 above.

Fixing only old LT shackle type insulator obtained from item No. 08 above

S&F pin type, porcelain virteous, white, brown or green insulator 100mm height, 65mm dia for 1100 Volts grade, including one GI MS spindle, two GI washers, one GI nut complete all as specified and directed by Engr-in-charge.

S&F LT shackle type, porcelain virteous White, Brown or Green insulator 90mm dia, 75mm height, including GI MS straps of Size 31 x 3 mm washers, 12mm dia, bolts suitable for 1100 volts grade complete all as specified and directed.

Dismantling of u/s stay assembly carefully including stay wire necessary excavation and earth work in any type of soil, demolition of PCC of any type and removing rubbish to as distance n. exc 50m at low lying area complete all as specified.

S&F stay assembly complete with accessories and stay rod 16mm dia and 180 cm long, including ms galvanized stay plate 300 mm x300 mmx6mm and galvanized thimble complete all as specified and shown in electrical plate No 1. of SSR 2009 ( Part-I ) Note:- (loop type insulator, stays clamps, excavation and earth work and concrete shall be measured and paid separately)

S&F loop type insulator porcelain virteous, White, Brown or Green & with over all dimension 65 x 90 mm, clearance of hole. 16mm vitreous,porcelain, white, brown or green complete all as specified and directed including removing of existing unserviceable from its position.

S&F in repairs galvanized steel wire stranded of size 7/2.24mm including necessary binding strengthening complete all as specified and directed.

Dismantling of u/s existing cross arms by means made from channels, angles, U/S FI clamps, nuts, bolts etc. from OH line complete all as specified and directed.

M&L Cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts ,bolts, in any shape or size as indicated or directed and including two coats of aluminium paint over a coat of red oxide complete all as specified.

-Ditto- all as sper item No 18 above but fixing old existing cross arms received against item No 16 above including cleaning, removing stain and including preparation of old steel surfaces applying two coats of aluminum paint over and including a coat of Red oxide (primer) all as directed by Engr. in charge.

Dismantling of existing u/s steel LT poles of any size & type from its position carefully and removing from the site and including necessary excavation and earth work in any soil/strata, demolition of concrete, disconnection of conductor from pole etc. complete all as directed.

Supply and install steel, tubular swaged poles complete with cast iron base plate, finial taper plug nuts and taper plug , bolts, nuts and screws as specified type 410-SP- 31 (9.0 m long) complete all as specified and directed. Note : Excavation, earth work shall be measured and paid separately.

Dismantling/taking down steel tubular/pcc pole of any size including insulater & cross arm& stay wire & refixing at new location directed by engr-in -charge. Note :- Excavation, earth work & PCC shall be measured & paid separately.

Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and n. exc 1.50 mtr deep, n. exc 10 Sqm on plan and getting out complete all as sp[ecified and directed.

-Ditto- all as per item No 23 above but depth exc 1.5 mtr and n. exc 3.00 mtr deep and getting out.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point complete all as specified and directed.

M&L unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Measurement shall be done after puning down of sand.

M&L Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` old size bricks laid dry and flat complete all as specified and as directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation of poles etc complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for stays,foundation and platform for transformer installation complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate for coping of pole with and including formwork complete all as specified and directed.

S&F in repairs 1100 Volts grade line composite phase separators, moulded & bolted type as per IS 1445 - 1997 suitable for the following :-

Taking down and S&F inreplacement XLPE insulated armoured and PVC sheathed "heavy duty" electric cable with aluminium conductor 1100 volts grade laid in trenches, passing through pipes /ducts including testing complete of following cross sectional area of the following sizes:- Note:- Rate is inclusive of cable gland & cable lugs. The contractor shall be used old cable route indicator retrietive from item No 33 to 35 above. Fixing cost for the same shall be included in the quoted rates of these items. Make : Havells/Finolex/ Polycab/ Universal

2 core, 4 sqmm cross sectional area

2 core, 6 sqmm cross sectional area

2 core, 10 sqmm cross sectional area

4 core, 16 sqmm cross sectional area

3.5 core, 25 sqmm cross section area

3.5 core, 35 sqmm cross section area

3.5 core, 50 sqmm cross sectional area

3.5 core, 70 sqmm cross sectional area

3.5 core, 95 sqmm cross sectional area

3.5 core, 120 sqmm cross sectional area

3.5 core, 150 sqmm cross sectional area

S&F in repairs 50mm bore, GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed Make :- JINDAL/ ZENITH/ TATA

S&F in repairs 80mm bore GI seel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA

Cutting of hardstanding/ Road for laying of pipe line/cable and making good surfaces after lying of pipe line/ cable upto 30cm in depth as per existing specification complete all as specified and directed.

M&L for boring of hole under road/hard standing by trenchless technology including S & F HDPE pipe "heavy duty " of size 100mm bore fixed in repairs complete all as specified and directed.

Relaying old dismantaled Bricks covering with width equal to length of bricks as mechanical protection to cable complete all as specified and as directed.

Taking down of faulty LT UG cable of size upto 3.5x120 Sqmm from trenches /pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete. Note:- Excavation/earth work and cable jointing & jointing kit shall be measured and paid separately under relevent item of schedule.

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 25 sqmm 3.5 core to 50 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 70/ 95 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/ Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size120 sqmm 3.5 core cable size to150 sq mm 3.5 core complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

Taking down partly unserviceable/unserviceable security/street/gate/flood light fittings from poles/towers/Perimeter Fencing of any type upto 9 m height by manual or mechanical means and for necessary repair and make srviceable as per complaint given by department (E/M service cell) through job card/complaint register on day to day basis all to the satisfaction of Engr in charge & complete all as specified and directed Note :- Ballast,Lamp holder, capacitor, ignitor, covers ,lamps and LED drivers of required wattage/type shall be measured and paid separately.

Fixing only repaired serviceable fitting of any size, and any make complete all specified and directed by engr-in-charge

S&F in repairs Electronic driver suitable for LED fitting 25 watt Make : bajaj/Wipro/Havells/ Crompton

S&F in repairs Electronic driver suitable for LED fitting 45 watt Make : bajaj/Wipro/Havells/ Crompton

S&F in repairs Electronic driver suitable for LED fitting 60 watt Make : bajaj/Wipro/Havells/ Crompton

Taking Down of street light Bracket including clamps of any type/any size from to pole/wall including necessary nut & bolts as directed complete all as specified and directed.

S&F GI pipe bracket made of light Grade tubing of size 40 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed

S&F GI pipe bracket made of light Grade tubing of size 32 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed

Supply and fixing new generation energy saving IP 66 street light luminiaries withlong life versatile pressure die-cast aluminium road way luminaire with high power LEDs light source with surge protection device and electronic driver LED Street light fitting 90 Watt, worm light, Make : Philips/ Havells/ Crompton/Wipro/Bajaj

Supply and fixing new generation energy saving IP 66 street light luminiaries withlong life versatile pressure die-cast aluminium road way luminaire with high power LEDs light source with surge protection device and electronic driver LED Street light fitting 72 Watt ,worm light ,Make: Philips/ Havells/ Crompton/Wipro/Bajaj

Supply and fixing new generation energy saving IP 66 street light luminiaries withlong life versatile pressure die-cast aluminium road way luminaire with high power LEDs light source with surge protection device and electronic driver LED Street light fitting 60 Watt ,worm light ,Make: Philips/ Havells/ Crompton/Wipro/Bajaj

Supply and fixing new generation energy saving IP 66 street light luminiaries withlong life versatile pressure die-cast aluminium road way luminaire with high power LEDs light source with surge protection device and electronic driver LED Street light fitting 45 Watt ,worm light ,Make: Philips/ Havells/ Crompton/Wipro/Bajaj

S&F LED Flood light lumanaries of size 100 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Philips/ Havells/ Crompton/Wipro/Bajaj

S&F in repairs post of lantern fitting made out of black ABS plastic spigot & spun alluminium funnel shaped with clear acrylic cover suitable for 1x45w LED lamp including fitting complete all as specified. Make : Bajaj/Wipro /Havels/Crompton/Philips

S&F in repairs Post of lantern fitting made out of polycarbonate mateial suitable for 1X25w LED lamp including lamp complete all as specified. Make : Bajaj/Wipro /Havels/Crompton/Philips

S&F in repairs sheet metal box of size 60cmx60cmx20 cm for fixing street light timer switch , frame pole mounted type fabricated out of 1.6 MM sheet steel including powder coat painting over a coat of red oxide primer including ,consisting of the following :- (a) MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&T cat no- CM97919OOH2OG /Legrand cat no-420013/schneider cat no-LV510315 - 2 nos (b) Astronomical, Multifunctional digital time swithces cat no 004767 of legrand or equivalent of L & T cat no- T2 DD T7/MDS/GIC - 1 no. (c )Power contactor ML-4 , 3 pole rating not less than 70 A with 230 coil make L&T/SEIMENS - 1 no. (d) Internal wiring and, clamp - 02 no.made out of 40x5mm flat & angle 40x40x5mm -0.90m long -2Nos. (e ) MCB SP 6 amps-1 No

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized streep 32x6 mm by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)

S&F in repairs PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper. Make of Box- SPELS BERG/ SINTEX/ HENSEL

S&F in repairs PVC insulated 3 core 2.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/plaza/havells/CCI

S&F in repairs PVC insulated 3 core 1.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/plaza/havells/CCI

S&F in repairs Astrorex D-22, Multifunctional digital time swithces Make : Legrand/L & T/ MDS/ GIC

S&F in repairs galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval complete all as specified and as directed.

S&F in repairs ALUMINIUM earth strip 25 mm x 4 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval all as specified and as directed.

S&F in repairs COPPER earth strip 20 mm x 3 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval all as specified and as directed.

S&F in repairs MCCB 400 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager/Legrand

S&F in repairs MCCB 250 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Legrand

S&F in repairs MCCB 200 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Legrand

S&F in repairs MCCB 160 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Legrand

S&F in repairs MCCB 125 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Legrand

S&F in repairs MCCB 100 A 25 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Legrand

S&F in repairs MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Legrand

S&F in repairs enclosure SUITABLE FOR MCCB TP complete all as specified Make : L&T / Schneider/Legrand

S&F in repairs ON LOAD change over switch 4 pole 400amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F in repairs ON LOAD change over switch 4 pole 315amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F in repairs ON LOAD change over switch 4 pole 200amps with sheet metal enclosure, Make : L&T schneider/Legrand

M&L for preparation for surface of existing PCC poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality Exterior grade apex paint all as directed by Engr in charge.

M&L for preparation for surface of existing steel poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality of aluminum paint all as directed by Engr in charge.

Labour for cutting the tree branches passing near the HT /LT OH line of width/ girth not more than 30cm upto 3 meter distance from adjacent pole or four/two pole structure all as specified and directed by EIC.

Note :- (i) Each span having 50 mtr distance approximately. (ii) All cutting branches of trees shall be thrown away /burnt at approximately 200 to 500 mtr away from site.

Repair of LT electric control panel board, cleaning inside with blower, servicing tightening all electrical connections/ contacts points, replacing defective locking clips thimble and making it serviceable with inter locking wiring including welding , painting and replacement of the defective parts and refixing back in its existing position complete all as specified and directed. Note: Defective parts shall be measured and paid separately.

Surface dressing by cutting grass, thorn bushes and congress grass upto the root level surrounding the installation incl the same not less than 200 mtr away all as directed by Engineer- in -charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surfaces of walls, floors, as per existing finishes etc complete all as specified.

Taking down carefully unserviceable/partly unserviceable light fittings any type, tube light/ surface light/ recess mounted/ high bay/ lamp/ ballast/ tube rod fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to match with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces

M&L for the following point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS), with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS) stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS/POLYCAB & Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling :-

-Ditto- all as per item No 87 above but One light point controlled by one, one way switch, One ceiling /exhaust fan point controlled by one switch and regulator ,One 3 pin 5 amps socket out let point on independent board and One bell/buzzer point controlled by one bell push.

-Ditto- all as per item No 87 above but One 3 pin 5 amp socket out point on the same board with other switches.

-Ditto- all as per item No 87 above but One light point controlled by two 2-way switches

-Ditto- All as per item No 87 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

S&F Switch piano flush type single pole one way 5 amps. Make : Havells/C&S/Anchor

S&F Switch piano flush type single pole one way 15 amps.Make : Havells/C&S/Anchor

S&F Switch piano flush button type Two way 5 amps.Make : Havells/C&S/Anchor

S&F Socket out let 2 in one, 5/3 pin 5 Amp. Make : Havells/C&S/Anchor

S&F Socket out let 2 in one, 5/3 pin 15 Amp .Make : Havells/C&S/Anchor

S&F Ceiling rose, surface bakelite 65x50 mm three terminal . Make : Havells/C&S/Anchor

S&F Call bell AC-230 Volt single pole ding dong including bell push.Make : Havells/C&S/Anchor

S&F Electronic regulator 100/120 Watt step type .Make : Havells/C&S/Anchor

S&F Lamp holder insulated body with back plate for angle holder . Make : Havells/C&S/Anchor

Fixing only Switch piano flush type single pole one way 5 amps.

Fixing only Switch piano flush type single pole one way 15 amps.

Fixing only Socket out let 2 in one, 5/3 pin 5Amp

Fixing only Socket out let 2 in one, 5/3 pin 15Amp

Fixing only Electronic regulator 100/120 Watt step type

Fixing only Lamp holder insulated body with back plate for angle holder all as per specified

S &F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,1x20 Watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nosetc. MAKE: HAVELLS/CROMPTON /WIPRO/BAJAJ/Philips

S & F LED light fittings decorative 28/30 Watt Surface mounting type extruded metal/aluminium body, and electronic LED driver, connector block ect. with all accessories internal prewired & including connecting up with 2 core flexible cppper conductor cable with suitable size and mounting clamps etc. MAKE: HAVELLS/CROMPTON /WIPRO/ BAJAJ/Philips

S&F Surface mounting round, decorative LED down lighter `10-15 WATT and transulent defuser, prefixed with flat profile etc., complete all as per Specified and directed. MAKE: HAVELLS/ CROMPTON /WIPRO/BAJAJ/Philips

Supply and fix LED security light fitting of 40 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make CROMPTON / Wipro/Philips/Havells/BAJAJ

S&F in repairs GI pipe 'light grade' bracket 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mm MS flat & fixed with anchor bolt suitable for 2 x 40W security light fitting complete all as specified and directed

S&F in repairs earth enclosure with 2 pin earth plug socket complete with MCB SP 20/25 Amp, flush mounting type Make - LEGRAND/ABB/L&T

SUPPLY & FIX in repairs capacitor 2.5 mfd suitable for ceiling fan/exhaust fan

SUPPLY & FIX in repairs PVC rectangular block of size 100 x100 x50mm for mounting switches, sockets/ fan Reg, etc with 3mm thick plastic laminated sheet cover complete all as specified

SUPPLY & FIX in repairs PVC rectangular block of size 175 x100 x50mm for mounting switches, sockets/fan Reg, etc with 3mm thick plastic laminated sheet cover complete all as specified

SUPPLY & FIX in repairs PVC rectangular block of size 200 x150 x50mm for mounting switches, sockets/fan Reg, etc with 3mm thick plastic laminated sheet cover complete all as specified

SUPPLY & FIX in repairs PVC rectangular block of size 250 x200 x50mm for mounting switches, sockets/fan Reg, etcwith 3mm thick plastic laminated sheet cover complete all as specified

SUPPLY & FIX in repairs PVC rectangular block of size 350 x300 x50mm for mounting switches, sockets/fan Reg, etc with 3mm thick plastic laminated sheet cover complete all as specified

S&F MCCB DB VERTICLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door Make : L&T/Legrand/ABB

S&F MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door ,L&T/Legrand/ABB

S&F MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,230 Volts SPN with 8 way Double door , IP-43-IK09 protection grade L&T/Legrand/ABB

S&F MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 12 way Double door IP-43-IK09 protection grade, Make : L&T/SCHNEIDER/ABB

S&F in repairs MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make : L&T/SCHNEIDER/ABB

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make : L&T/SCHNEIDER/ABB

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps complete all as specified Make : L&T/SCHNEIDER/ABB

S&F in repairs MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified Make : LEGRAND/ABB/L&T

S&F in repairs MCCB TPN 63 Amps , 415Volts, 25KA ,4 Pole L&T CAT No-SL98603OOOO/ LEGRAND CAT NO-420053 / ABB

S&F in repairs MCCB TPN 100 Amps , 415Volts, 25KA ,4 Pole L&T CAT No-SL98605OOOO/ LEGRAND CAT NO-420055 / ABB

M&L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm (FRLS), earth continuity conductor of size1.5 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors including Taking down old sub main wiring with conduit of any size/capacity including conduit and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 1.5 sqmm & PVC conduit shall be measured as one unit.

M&L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm (FRLS), earth continuity conductor of size 2.5 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors including Taking down old sub main wiring with conduit of any size/capacity including conduit and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 2.5 sqmm & PVC conduit shall be measured as one unit.

M&L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm (FRLS), earth continuity conductor of size 4 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors including Taking down old sub main wiring with conduit of any size/capacity including conduit and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 4 sqmm & PVC conduit shall be measured as one unit.

M&L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 10 Sqmm (FRLS), earth continuity conductor of size 6 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors including Taking down old sub main wiring with conduit of any size/capacity including conduit and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer in Charge. Notes:- Two wires of 10 sqmm and one wire of 6 sqmm & PVC conduit shall be measured as one unit.

Supply and fix in repair LED Bulbs of 7 Watt make of Bajaj/ Crompton/ SYSKA/ Wipro

Supply & Fix in repairs LED bulb of 9 Watt make of bajaj / crompton / SYSKA / Wipro

Supply & Fix in repairs LED bulb of 12 Wattmake of bajaj / crompton / SYSKA / Wipro

Supply & Fix in repairs LED bulb of 15 Watt make of bajaj / crompton / SYSKA / Wipro

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)

S&F in repairs Modular Switch piano flush type single pole one way 5 amps. Make : Havells/C&S/Anchor

S&F in repairs Modular Switch piano flush type single pole one way 15 amps.Make : Havells/C&S/Anchor

S&F in repairs Modular Socket out let 2 in one, 5/3 pin 5 Amp Make : Havells/C&S/Anchor

S&F in repairs Modular Socket out let 2 in one, 5/3 pin 15 Amp Make : Havells/C&S/Anchor

S&F in repairs Ceiling rose, surface bakelite 65x50 mm three terminal . Make : Havells/C&S/ Anchor

S&F in repairs Call bell AC-230 Volt single pole ding dong. Make : Havells/C&S/Anchor

S&F in repairs Modular Bell push, flush type 5 Amps. Make : Havells/C&S/Anchor

S &F in repairs Electronic regulator 100/120 Watt step type. Make : Havells/C&S/Anchor

S&F in repairs Electronic regulator 100/120 Watt step type ( mini type). Make : Havells/ C&S/ Anchor

S&F in repairs Lamp holder insulated body with back plate for angle holder. Make : Havells/C&S/ Anchor

S&F in Repairs Switch piano flush type single pole one way 5 amps. Make : Havells/C&S/Anchor

S&F in Repairs Socket out let 2 in one, 5/3 pin 5Amp. Make : Havells/C&S/Anchor

S&F in Repairs Switch socket combination 5 Amps 5 pin flush type. Make : Havells/C&S/Anchor

S&F in Repairs Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal. Make : Havells/C&S/Anchor

S&F in repairs PVC insulated 3 core 2.5 Sq mm multistanded copper conductor for connection of geyser all completed as specified and directed.

S&F in repairs 40mm bore, GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed Make :- JINDAL/ ZENITH/ TATA/ PRAKASH

Taking down and dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400/1500mm sweep fan all as specified. Note :- Spare parts shall be measured & paid separately :- (i) Split pin - 02 Nos (ii) Connection block - 1 No (iii) Insulation rubber bush. - 01 No

Fixing or hanging only ceiling fan after winding fan under item No. 151 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed

All as pr item No. 151 here-in-above but exhaust fan of size 225mm to 450mm sweep (except rubber roll, split pin)

Fixing only Exhaust fan after winding fan under item No. 153 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed

Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down.(Note- (A) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (B) The spares required shall be measured and paid separately in the relevant items).

Taking down exhaust fan, of any size and type & cleaning/servicing and overhauling the same, refixing the same on its existing position and connection up.

S&F in repairs gun metal bush of any size (Make - MSP/asper existing make).

S&F in repairs bearing for ceiling fan (Make - TATA/SKF No.6201/6202).

S&F in repairs bearing for ceiling fan (Make - TATA/SKF No.6203/6204).

S&F in repairs fan condensor 2.5 MFD (Make – USHA / UNIVERSAL).

S&F in repairs fan condensor 4 MFD (Make – USHA / UNIVERSAL).

S&F in repairs split pin as per existing specification/size

M&L for Painting of ceiling fan 1200/1400 mm sweep complete including fan blades down rod with one coat of synthetic enamelled paint of white tint on old surface including cleaning and removing dust and dirt and making smooth surface for painting including writing MES No complete all as specified.

S & F in repairs Mild steel work in framed work such as Fan hooks, Clamps, gratings, ladders etc., with ends of bars welded and/ or riveted, or forged and similar work confirming to Fe 410 - O or Fe 310 - O and incl painting to surfaces using two coats of metallic primer and a coat of synthetic enamelled paint of desired colour as directed.

S & F in repairs High Bay light fitting 90/100 W LED suitable for hanger, die cast aluminium housing with heat dissipation fins, easy to maintain, enclosed type, top opening complete with ballast, lamp, reflector, hosing glass with gasket etc.including electrically connected all as specified and directed. MAKE PHILIPHS/WIPRO/HAVELS/BAJAJ

Schedule of credit amount of Rs. 1,42,197.00 to be deducted during AOC

Goodluck Enterprises

ELCON