REPAIR REPLACEMENT OF FLOORING PLUMBING SANITARY FITTINGS JOINERY PERIODICAL AND WELCOME ETC AND CERTAIN OTHER MAINTAINED WORKS UNDER GE I GOS

Amount

Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate for fixing of hold fast and making good all as specified and directed.

M&L Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified and directed.

M&L Second class hard wood 35 mm thick factory made plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.

M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21 for 75 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 100 mm size complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Takig down pelment boxes/cupboard shutters of any size and any type complete all as specified and directed.

M&L Particle board 18/19 mm thick, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws in pelmet boxes or in narrow widths n exc 15cm each rebated or flat edged complete all as specified and directed.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed .

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

Taking down aluminium door and windows of any size and of any description built in wall and making good at disturbed surface with cement mortar 1:4 and applying two coats of plastic emulsion paint as per existing treatment complete all as specified & directed.

S&F anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation; No 02 universal type, for each shutterscomplete all as specified and directed. (Door shall be size approx 1.2mx2.1 in single leaf)

S&F aluminium anodised galzed hung type window shutters made out from anodised aluminium frame of 'H' section size 34.00x43.5x2mm thick with 4mm tinted sheet galss (Weight not less than 0.57 kg/RM and shutter 'Z' of size 34.00x43.5x28.00mm having thickness 2.00mm (Wt not less than 0.50kg/RM) and all necessary jointing cleats , glazing, clips rubber packing, aluminium snap beading Tower bolt 100mm long 1 No and sliding hinges 180mm longs including aluminium grill with Mosquito proofing etc complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F door closer hydraulically regulated designation No 1, universal type, suitable for door shutter of weight not more than 35 Kg of aluminium (extruded section body) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F figured glass 3 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and apply one coat of white wash complete all as specified and directed

M&L for preparation of old plastered surfaces of ceilings and apply one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of oil bound distemper complete all as specified and directed.

M&L for rendering 15mm thick on other than fair face of brick works in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement and mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. (Note: supply only of WPC shall be measured and paid for seperately )

Supply only integral water proofing compound ISI marked complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 100 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 15mm dia complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm dia complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm dia complete all as specified and directed.

S & F 15mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

S & F 20mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

S & F 25mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

Re-fixing old 15mm bore GI steel tubing of comlete all as specified and directed.

Re-fixing old 20mm bore GI steel tubing of comlete all as specified and directed.

Re-fixing old 25mm bore GI steel tubing of comlete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store comlete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S & F in repairs 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per item no. 60 but 25mm bore

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl complete all as specified and directed.

S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete all as specified and directed.

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest & including 10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete all as specified and directed.

S&F in repair Vitreous china bowl type Urinal flat back ,size 465x355x265 withgrating and Union for discharge pipe including all necessary items complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etccomplete all as specified and directed.

S&F health faucet with fluxi pipe and hand shover ,the length of hose 1.50mt fitted to the tapcomplete all as specified and directed.

S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts .

S&F in repair 15 mm fancy type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube all as specified and directed.

S&F in repair elbows 15 mm dia brass both ends screwed and fixed complete all as specified and directed.

S&F in repair elbows 20 mm dia brass both ends screwed and fixed complete all as specified and directed.

S&F in repair union15 mm dia brass to connect iron to polyethylene and fixed complete all as specified and directed.

S&F in repair union 20 mm dia brass to connect iron to polyethylene and fixed complete all as specified and directed.

S and fix Grating doom125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed

M&L 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs complete all as specified and directed.

Demolition and breaking up PVC(SWR) pipes any size in any position complete all as specified and directed.

S&F PVC(SWR)75mm bore pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

All as per item no. 81 but 110mm complete all as specified and directed.

S&F PVC (SWR)bend 110mm bore complete all as specified and directed.

S&F PVC (SWR)bend 75mm bore complete all as specified and directed.

S&F PVC(SWR) bend 110mm bore with access doorcomplete all as specified and directed.

All as per item no. 85 but 75mm bore complete all as specified and directed.

Supply and fixed PVC (SWR) vent cowl, 100mm dia complete all as specified and directed.

Supply and fixed PVC (SWR) vent cowl, 75mm dia complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M & L for two coats of cement based paint on new plastered surface of walls including preparation of surface complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/colour shade polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item no. 98 but on vertical surface of wall of size 600x600x10mm thick as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

All as per item 100 but vertical surfaces area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm as skirting non skid ceramic tiles

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

All as per item 102 but vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm as skirting non skid ceramic tiles

M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for cement concrete tiles of size 250 mm x 250 mm x 20-22 mm thick machine pressed set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for sand cushioning including spreading in layers and rolled consolidated to thickness of 50mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and directed

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on other than fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement and mixed with water proofing compound complete all as specified and directed. (Note: supply only of WPC shall be measured and paid for seperately )

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 Type B-2 using 40mm graded stone aggregate in pavement/hard-standing laid in alternative panels, surface finished even and smooth without using extra cement, including necessary form work, complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

M&L Preparing old treated surfaces of walls (plastered or unplastered surfaces) and applying one coat of cement base paint.

M&L Preparing old treated surfaces of walls (plastered or unplastered surfaces) applying two coat of cement base paint..

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper over 2 coat wall care putty to walls complete all as specified

M&L for preparation of old plastered surfaces of ceiling and applying two coat of oil bound distemper over 2 coat putty to ceilings complete all as specified and directed.

M&L Preparing old painted wooden/wood based surfaces over 10cm width or girth and applying one coat (finishing coat ) of synthetic enamel paint.

M&L Preparing old painted steel surfaces over 10 cm width of girth and applying one coat (finishing coat) of synthetic enamel paint.

M&L for one coat of synthetic enamel paint to plastered or concrete surface incl preparartion of old surface as in small patches for bases for writing bldg numbers.

Writing letters with synthetic enamel paint not exceeding 30 cm high including preparation of base surface not exceeding 30 cm in diameter and applying one coat of synthetic enamel paint.

M&L for rendering plaster 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface of wall etc and finished even and smooth without using extra cement all as specified and directed.

Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement. complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall including removal of vegetation and applying two coat of cement base paint over primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over primer with 2 coat wall care putty to walls complete all as specified and directed.

M&L for preparaion of treated surfaces and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® walls comlete all as specified and directed.

Taking down existing water proofing membrance and cleaning roof, plastered surface etc preparing the surface to receive plaster by brushing with wire brush and fanning the surface to remove all loose dirt etc and brushing neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed.

M&L for water proofing treatment to roof surface complete all as specified & directed with the followings :- (a) Apply bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (c) Applying bituminous based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane.

M&L Providing cement concrete type C-1 1:3:6 (20mm graded aggrigate) in roof kerbs or mud stops, rounded or chamfered on edges.

Dismantling PVC water tanks exc 1000 ltr but n. exc 2000 ltr capacity and removing to store.

S&F in repair Wall mixer with provn for overheadshowerwith 115mm long bend pipe on upper side connecting legs,& wall falnges, fixed in repairs. Make : Jaquar Code No - CQT - 23273UPR

Supply and laying CPVC pipes of size 16mm outer dia SDR 11 & Plain CPVC 11 fitting on walls/ceiling or laying in floor comlete all as specified and directed.

All as per item no. 132 but 20 mm outer dia

All as per item no. 132 but 25 mm outer dia

S&F CPVC Brass Elbow of size 16 mm outer dia complete all as specified and directed.

All as per item no. 135 but 20 mm outer dia

All as per item no. 135 but 25 mm outer dia

S&F CPVC Brass Elbow (3/4 x1/2) 20 mm outer dia

S&F CPVC Brass Tee of size 16 mm outer dia complete all as specified and directed.

All as per item no. 139 but 20 mm outer dia

All as per item no. 139 but 25 mm outer dia

S&F CPVC Male Brass Threaded Adaptor (MTA/MBTA) of size16 mm outer dia complete all as specified and directed.

All as per item no. 142 but 20 mm outer dia

All as per item no. 142 but 25 mm outer dia

S&F CPVC Female Brass Threaded Adaptor (FTA/FBTA) of size 16 mm outer dia complete all as specified and directed.

All as per item no. 145 but 20 mm outer dia

All as per item no. 145 but 25 mm outer dia

S&F CPVC Tank adaptor 20 mm outer dia

S&F CPVC Union of size 16 mm outer dia complete all as specified and directed.

All as per item no. 149 but 20 mm outer dia

All as per item no. 149 but 25 mm outer dia

S&F Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to wallscomplete all as specified and directed.

S&F Chromium plated brass shower rose75 mm dia with swivel joints, fixed in repairs complete all as specified and directed.

S&F Angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe, fixed in repair complete all as specified and directed.

S& F in repairs CP Jt Spray/Health faucet with 1.5 mtr 15mm bore PVC Tube and hooke all as specified and directed .

S & F in repair coloured EWC sheet cover comlete all as specified and directed.

S & F in repairs grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs complete. (Minimum weight 40 gms) complete all as specified and directed.

S & F in repairs PVC waste pipe 32mm dia, 60 cm long for WHB with cup, fixed in repairs complete all as specified and directed.

All as per Item No 158 but 40mm dia for sink complete.

S & F in repairs Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc complete.

PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs.

M&L for removing of sludge from septic tanks including removal of sludge water or mechanically in all respect and removing the sludge to distance not exceeding 500 mtrs and burriedin to the ground and making to a true surface and covering with loose soil and as directed (The rate included excavation and filling )

M&L for cutting and removing wild bushes/ vegetation, surface dressing around the septic tank/sock well/ manholes to a distance of 2 mtrs all around and depositing surplus spoil/ rubbish exc 100M but n.exc 500 M complete all as specified and directed.

Cleaning of sewage line (length from manhole to manholes) of any dia by roding and flushing after cleaning and removing mud/sludge etc to a distance exc. 250m but n.exc 500m and spreading,burried in to the ground and making to a true surface and covering with loose soil and as directed (The rate included excavation and filling )

Cleaning of manholes and removing sludge from manholes of any size and depth and deposing the sludge and spreading,burried in to the ground and making to a true surface and covering with loose soil and as directed (The rate included excavation and filling )

Cleaning the blockage of floor trap, nahani trap, gully trap and first man hole complete all as specified and directed.

Excavation in trenches n.exc 1.5M wide and n.exc 1.5 M deep for foundation and getting out in soft/loose soil complete all as specified and directed.

Demolition and breaking up drain pipe of any description up to 150mm dia in CM 1:4 including demolition of cement concrete bedding and hunching complete all as specified and directed.

Demolition and breaking up drain pipe of any description up to 200mm dia in CM 1:4 including demolition of cement concrete bedding and hunching complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under, and hunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under, and hunching against the sides of pipes after they are laid and tested for 200mm dia pipe complete all as specified and directed.

M&L for 150mm bore salt glazed stoneware drain pipe grade ‘A’ laid in trenches complete all as specified and directed.

M&L for 200 mm bore salt glazed stoneware drain pipe grade ‘A’ laid in trenches complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) 110 mm dia equal or unequal with access door

S&F PVC (SWR) junction double, (double T) 110 mm dia equal or unequal with access door

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm bore drain pipe.

M&L for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation and mass soncrete complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as benching , surface channel and similar articles finishing even and smooth using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in copings, bed plate, including weathering, slightly rounded or chamfered angles and throating with necessary form work complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L Brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 Complete all as specified and directed.

M&L for rendering plaster 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface of wall and finiceshed even and smooth without using extra cement including taking down of plaster all as specified and directed.

S&F Framed work such as grill grating, doors or gates with ends of bars shouldered and / or rivetted, or forged into spikes, framed gurad bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work confirming to Fe 290 Gde E-165 of any section and sizes as directed by Engr-in-Charge.

M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required, hooking, bending and binding with ms wire (anneled) not less than 0.90 mm dia.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for pre cast cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for mild steel 6 - 8mm dia TMT bars bent to shape required, including cranking, bending and binding with mild steel annealed wire not less than 0.9mm dia complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth without using extra cement.

S&F in repairs Concertina coils super barbed bladed profile of dia 600 mm of and wt of coil for 50 spiral turns shall not be less than 9.0 kg and one coil (50 spiral) shall not be stretched to more than 6.0 mt. blade shall be 0.50mm th galvanised steel strip and 2.5mm dia core wire fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc complete all as specified and as directed by Engineer-in-charge.

S & F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 100mm spacing all as specified.

Dismantling of AC Corrugated / semi corrugated roof sheets any type and any size complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including frame work of aluminium / wooden complete all as specified and directed.

M&L Suspended false ceiling system using E-Grid suspended ceiling Grid system,Grid size 600mm x 600mmx with and including GI Frame work of main runners 38mm x 24mm,cross tee 28mmx 24mm and wall angle 24mmx 24mm hot dipped galvanised steel with Zinc coating not less than 120gm/Sqm using 4mm thick high pressure steam cured fibre cement pre primered texture variant E board classic, ISI Marked IS-14862-2000 to be placed in grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from existing purlins to roof with butterfly clips and taking down exisitng old ceiling board with cover fillets complete all as specified and directed.Make:- M/S Everest Industries Ltd or equivalent as approved by zonal chief Engineet/E-in-C's Branch with equivalent specification. Note:- Invoice from company's authorised dealer shall be submitted with material by the contractor alongwith dealership certificate. certificate of E-Grid geniunness from the manufaturer shall also be submitted by the contractor before getting the material passed from department.

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed by the Engineer -in-Charge.

M&L for applying bituminous premixed semi dense asphaltic concrete 40mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher. comlete all as specified and directed.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber n.exc 75mm thickness (consolidated thickness) with 4% binder content of VG -30 by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished comlete all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 1.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

S&F in repair cat eyes/road studs for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrssion resistant ceramor coating having body of weather proof and impect resistant thermoplasit complete as per manufacturer,s instruction and as directed. (Colour :- Yellow/Red/Amber) Make: Series 290 of 3M or Road Star or Equivalent.

S&F in repair solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction and directed by Engr-in-Charge Make- 3M/Avery Dennision/Dark Eye/Green/Greenlite/Road Star Cat Part No. GSR-909 or Equivalent.

M/s Ats Electricals

M/S JAGANNATH SASMAL

M/S SIWALIK AND CO

DHABALESWAR ENGINEERING WORKS