SPECIAL REPAIRS TO TOILETS IN R AND I STORES, MSL, ROAD WHEEL COMPLEX AT TECHNICAL AREA CVRDE AVADI

Amount

Demolition of any type of cement concrete in floors/sunken floors surfaces including removal of old tarfelt,plastering etc upto the original RCC floor all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises all as specified and directed by the Engineer-in-Charge.

M&L 15mm thick Screed bed or bedding layers in cement mortar 1:6 for laying floor finishes all as specified and directed by Engineer-in-charge.

M&L for 40mm thick PCC1:2:4, type B1 using 20mm graded aggregate laid to slope in floors/sub floors all as specified and directed by Engineer-in-charge

M&L Non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 and n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed by the Engineer-in-Charge.

M&L glazed ceramic coloured tiles of size 350x450x7/350x250x7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 10mm thick plaster as backing coat in CM 1:4 all as specified and directed by Engineer-in-charge

S&F PVC SWR pipe single socketed in any length with rubber ring joints fixed to wall/flooring 110mm dia for rain water pipe all as specified and directed by Engineer-in-charge

S&F PVC SWR pipe single socketed in any length with rubber ring joints fixed to wall/flooring 75mm dia for soil waste all as specified and directed by Engineer-in-charge

S&F 75mm PVC SWR bends of any radius all as specified and directed by Engineer-in-charge

M&L for PVC (SWR) Floor trap 75 mm dia , including 40mm dia HDPE pipe up to the trap of bath room and jointing with solvent with outlet pipes, stainless steel grating etc fixed all as specified and directed by Engineer-in-charge

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement with outlet pipes and PCC 1:2:4 filling around trap and 25mm thick PCC cover slab on gully trap all as specified and directed by Engineer-in-charge

S&F 75mm PVC SWR junction single,(Single T) equal or unequal with access to door all as specified and directed by Engineer-in-charge

S&F 110mm PVC SWR junction single,(Single T) equal or unequal with access to door all as specified and directed by Engineer-in-charge

S&F 75mm PVC SWR vent cowl all as specified and directed by Engineer-in-charge

S&F 110 mm trap P or S trap PVC (SWR) inc luding making floor with PCC 1:2:4, type B-1 f concrete surfaces complete all as specified.

S&F vitreous china squating pan "ORISSA' pattern of size 580 x 440mm white with integeral foot rest etc (Excluding flushing cistern and flush pipe) complete including trap set in cement motar 1:3 & provision of lime concrete bedding and making good to floor, fixed in repairs all as specified.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including connecting to trap and to flushing pipe anti syphonage pipe etc seat cover complete set in concrete flush pipe to closet including all joints and making good floor and wall all as directed.

S&F in repairs Plastic water closet seat coloured EWC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed by Engineer-in-charge

S&F PVC valveless, syphonic action type, flushing cistern, 10 ltrs and flush pipe syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets of approved including taking down flushing cistern of any model all as specified and directed by Engineer in charge.

S&F vitreous china wash basin, oval shape coloured size 550 x 400mm including waste drain pipe, plug, procelin stopper, waste fitting 32mm dia, brackets complete fixed in repair all as specified .

S&F Pillar taps, cast copper alloy with capstan heads,chromium platted fancy type screwed down high pressure with or without lettered HOT or cold with long screwed snates and fly nuts, Screwed for iron pipe and fixed for 15mm bore dia

S&F in repair vitreous china urinal half stall type complete including providing and fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe with grating union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minium weight 60gms)

S&F in repair vitreous china urinal partition white size 310mm x 770mm, all as specified and directed by Engr-in-charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F High density 32mm polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to WHB/urinal/steel sink in repairs of waste pipes complete all as specified.

S & F in repair for bib tap cast copper with capasten head, chromium plated, screwed down high pressure, with our without lettered ,Hot or Cold with long screwed with crutch or butterfly handle, fancy type ,screwed down, screwed for 15mm dia iron pipe and all complete .

S&F in repair stop cock (concealed) cast copper alloy with capasten head, chromium plated, screwed down high pressure, with long screwed with crutch or butterfly handle, fancy type, screwed down, screwed for 15mm dia iron pipe and all complete

M&L Soap shelf, PVC white/colour appx size 450 x 125 x 40mm (as per sample). Make: Prayag or equivalent

S&F in repair Chromium plated cast copper alloy health facuet for 15mm dia incl telephonic pipe & holder Complete (Make : Roca of Each Parryware india Ltd CAT No RF906041 or equivalent)

M & L for 20 mm thick granite work (table rubbed and polished) laid over 10 mm thick plaster with cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping ends and binding with and including with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified .

M & L Precast RCC 1:2:4 type B1 using 20mm graded crushed stone agg as in cover slabs, of any thickness, size or shape incldg necessary form work, finished concrete surfaces fair & even in CM all as specified and directed by Engr - in -Charge.

M&L Brick work with sub class ‘B’ bricks curved on plan exc 6 M mean radius built in cement mortar 1:4 in half brick thick walls

Taking down or up old steel tubing galvanised and connections including cleaning for refixing .

(a) Bore of pipe in 15 mm.

(b) Bore of pipe in 20 mm.

Refixing old steel tubing and connections in new or old position (walls, ceiling, flooring etc).

(a) Bore of pipe in 15 mm.

(b) Bore of pipe in 20 mm.

Supply and fixing tubes medium grade galvanised with all fittings including socket,reducer,elbow, union,tee, solid bugs etc., fixed complete to walls and ceiling or laid in floors.

(a) Bore of pipe in 15 mm.

(b) Bore of pipe in 20 mm.

Dismantling 1000 ltr capacity water tanks and removing to store all as specified and as directed by the Engineer-in-Charge.

S&F 1000 ltrs capacity,Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engineer -in-charge.

S&F 20mm brass ball valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule all as specified and as directed by the Engineer-in-Charge.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m with shutters (without taking off shutters from the frame) each

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Taking down existing windows/ventilators complete all as specified and directed.

S&F Alumnium powder coated sections made out of hallow/solid extruded aluminium section (minimum thickness of powder coating 50 micron) for openable windows/sliding windows/ventilators/door shutter/parttition with all types of windows, doors & Ventilators frames with one or more rebates including joining cleats, beads for fixing etc complete all as specified and as directed & approved by Engineer-in-Charge.(glass/wiremesh shall be measured and paid separately)

S&F tinted glass 5.5mm thick fixed with glazing clip, rubber beading /gasket in squares in each pane all as directed.

Prelaminated particle board interior grade 9mm thick with decorative choice lamination on both side

S&F Alumnium powder coated louvers (movable arrangement in pair) for ventilators including locking arrangement complete all as specified and as directed

S&F Figured glass, pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm all as directed.

S&F 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium aloy and flexed.

S&F 200mm Aluminium anodized barrel tower bolts of extruded section and fixed.

S&F Aluminium handle cast type anodized of size 150mm long.

S&F SS Butt hinges,100 mm, medium weight, cold rolled steel, and fixed

Taking down cement plaster or terrazo from brick walls or concrete of any description,racking out joints hacking for key scrubbing down with water etc complete all as specified

Rendering 15mm thick in fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth with out using extra cement all as specified.

Rendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.

Preparation of New plastered ceiling surfaces and apply three coats of white wash etc complete all as specified and directed.

Preparation of Old plastered ceiling surfaces and apply two coats of white wash etc complete all as specified and directed.

Preparation of New plastered wall surface and apply three coat of white wash over newly plastered wall surfaces complete all as specified and directed.

Preparation of New plastered wall surface and apply two coat of cement based paint over a coat of primer all as specified.

Preparation of Old plastered wall surface and apply two coat of white wash over existing surface all as specified and directed.

Preparation of Old plastered surface and apply two coat of OBD over existing surface all as specified.

Demolition of Brick work or stone masonry build in cement mortar all as specified and as directed by the Engineer-in-Charge.

M&L for Brickwork with Fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified.

Rendering 10mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement all as specified.

S&F PVC SWR bends 110mm dia bore of any radius with access to door complete all as specified and directed.

S&F PVC SWR vent cowl 110mm dia bore complete all as specified and directed.

M&L rendering 10mm thick cement plaster in cm 1:3 pm fair faces of brick wall or concrete surface finished even and smooth without using extra cement and mixing water proofing compound at 3% cement weight including applying a coat of bitumen grade 85/25 at 1.2 kg / Sqm, complete all as specified and directed.

M&L for lime cocrete with brick aggregate in lime motar 1:3 in sunken floors etc all as directed by Engr-in-Charge

S&F Hydraulic door closer, universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed (aluminium section) complete all as specified and directed.

Plain cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in benching and coping complete all as specified and directed.

S&F Cabinet PVC with mirror suitable for to keep the bathroom items, size 400 x 500mm, white colour all as specified. Make : PRIYAG (CAT. NO - 554) or equivalent

Preparation of old decorated plastered surfaces and applying one coat of weather coat paint over complete all as specified and directed.

Taking down aluminium point wiring of any type complete for light, fan, socket including making good disturbed surface to match the existing surface complete all as specified and directed.

Taking down old DBs any type, size including MCBsany size and making good disturbed surface to match the existing surfaces complete all as specified and directed.

Taking down u/s aluminium submain wiring any type, size including and making good disturbed surface to match the existing surfaces complete all as specified and directed.

Material and labour for point wiring complete with ISI marked 1.5 Sqmm PVC insulated FRLS type unsheathed multistranded single core cable with copper conductor 1100 volt grade drawn through and including PVC conduit concealed accessories ISI marked, on wall, ceiling,RCC, roof slab, beams and columns or fixed in concealed etc. including galvanized modular metal box factory made of suitable size suitable for fixing of and including modular plate as per number of switch modules flush mounted suitable for fixing of and including modular plate cover of required size and 1.5 Sqmm PVC insulated multistranded unsheathed copper earth conduitity conductor and connecting to earth dolly etc. all as specified for and connecting up complete for for for the following (a) One light/fan point controlled by one single pole 5A switch

Sheet metal enclosure for MCB DB SPN 8 way, 240 Volts, single phase, double door with IP-43 protection rated busbar suitable for DP MCB as incomer and DP/SP MCB as outgoing, flushed on wall surface and wrting letters as DB Title/Incomer/ Outgoing details in paint over DB door complete all as specified and directed.

MCB SPN 32 Amps, 10 KA breaking capacity C curve with connection complete all as specified and directed.

MCB SP 6A to 32A range, 240V 'C' series, 10 KA breaking capacity & connection complete all as specified and directed.

Modular switch 6 Amps, single pole,oneway,1 module complete all as specified and as directed

S&F for ceiling rose surface bakelite size 65x50mm three terminal 230V, 50Hz complete all as all as specifed and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed make Havelss Cat No ENDURALINEARNEOBS20WLED 865SPCWH/ Wipro Cat No LL20-281-XXX-65AL1/ Phlips Cat No BN 021 LED25S 6500 PSU GR S1

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed Make Havells Cat No ENDURALINEARNEOBS10W LED865S PCWH/ Philips Cat No BN 021 LED10S- 6500 PSU GR S1

Sub main wiring with 2runs of single core 4sqmm 1100 Volts grade, FRLS PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including ISI marked PVC Conduit concealed in walls / roofs / floors etc., including provision of FRLS PVC insulated 4sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note: Two runs of 4sqmm cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

ENGINEERS WINDOW

MONISH CONSTRUCTIONS