Loading
Loading…
Loading…
Tender ID
Tender Value
₹2.6 Cr
EMD Value
₹2.8 L
Closing Date
16 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SNT TELE
15 conditions · 2 needing a document upload
IR GCC 2022 ACS 1 CLAUSE 10.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
IR GCC 2022 ACS 1 CLAUSE 10.1 - 1. Technical Eligibility Criteria: (As Per IR GCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note - Works Completion certificate of Similar work along with copy of LOA as per IR GCC 2022 may be submitted (If MEC Applicable), this shall be on bidder's name. NOTE - SUBSTANTIALLY COMPLETED WORKS IS DEFINED IN TENDER DOCUMENT ATTACHED HEREWITH vide Para 10.5 of GCC April 2022 with latest applicable ACS.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar nature for this work "Work of supply, installation and commissioning of IP based CCTV Surveillance system through Networking (WAN/LAN)."
13 conditions · 1 needing a document upload
The local content requirement for this work is minimum 50% for Make in India compliance. The offer submitted by the firm against this tender shall be in compliance of Order No. P45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry attached with this tender as PDF. Non-compliance of this Make in India order in the offer submitted by the firm shall lead to summarily rejection of the offer. The tenderer shall enter local content percentage under Sl. No. 2 of Commercial-Compliance with their offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The said suppliers of goods and/or services would be subject to GST Act and rules as applicable from time to time. Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
In case of sole proprietorship Firm: A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. OR for Partnership Firms: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. OR For Company registered under the Company's Act: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization /Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. OR For Registered Society and Registered Trust: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed. (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. OR For Limited Liability Partnership (LLP) Firms: (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation. (iii) A copy of Power of Attorney /Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In Absence of these documents, offer of the firm will be summarily rejected. For more clarification regarding this, pls refer GCC April 2022 with latest ACS available on railway official website.
I/We agree to carry out all works with use of modern equipments of required capacity for the work without extra payment. The decision of railway engineer shall be final and binding in this regard.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
The quantities shown above are approximate and to give a general guideline. Railway reserves a right to increase, decrease or to delete any of the items mentioned in schedule.
Special Conditions of Contract for Mandatory Updating of Labor Data or Railway's Shramikkalyan Portal by Contractor as per Railway Board's letter No2018/CE-I /CT/4 dated 17.10.2018: In order to increase in payment of contract labour wages and other payments aweb-based e- application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in All contractors are required to upload details of their LOAs, engaged workmen, wage payment details,|PF/ESI details, bonus details etc., on monthly basis. The details so uploaded shall be available in public domain.. In order to ensure the compliance and fulfillment of these instructions, following action is required to be completed by contractors: A) Contractor is to abide by the provisions of Payment of Wages Act and Minimum wages Act in terms of Clause 54 and 55 or Indian Railways General Conditions of Contract. In order to ensure the same, an application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in . Contractor shall register his firm/company etc. and upload requisite details of labor and their payment in this portal. These details shall be available in public domain. The Registration/updating of Portal shall be done as under:-a )contractor shall apply for one time registration of his company/firm etc. in the Shramikkalyan portal with requisite details subsequent to issue of Letter of Acceptance Engineer shall approve the contractor's registration on the portal within 7 days of receipt of such request. b)Contractor once approved by any Engineer, can create password with login 1D (PAN No.) for subsequent use of portal for all LoAs issued in his favor. c)The contractor once registered on the portal, shall provide details of his letter of Acceptance (LOA)/Contract Agreements on Shramikkalyan portal within 15 days of issue of any LoA for approval of concerned Engineer. Engineer shall update (if required) and approve the details of LoA filled by contractor within 7 days of receipt of such requested) After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on Shramikkalyan portal on monthly basis. e)lt shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour and payments made thereof after each wage period. B)While processing payment of any On Account bill or Final bill or release of Advances or Performance Guarantee/Security Deposit, Contractor shall submit a certificate to the Engineer or Engineer's representatives that I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal atwww.shramikkalyan.indianralways.gov.in till..Month... Year......
GCC April 2022 with latest ACS has been introduced and published/available on railways website. The provisions of GCC 2022 or latest amendments released till the time of date of publishing of tender will be applicable on this tender. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC while execution of work.
1) Augmentation of Video Surveillance system at 05 station (HD, SCI, BAQ, GUNA, SVPI) of Bhopal Division. 2) Provision of CCTV for yard coverage of mainline facing points at Misrod, Kurwai Kathora and Nishatpura station of Bhopal Division.
BPLNWKS2025-26TELE12
BPLNWKS2025-26TELE12
Open
Works - General
6 Months
Bhopal, Madhya Pradesh
₹0
₹2.8 L
16 Apr 2026
24 Mar 2026
2 Apr 2026
53 items across 2 schedules · ₹2,56,61,887.52 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply, Installation, Testing and Commissioning of Full HD Fixed Bullet type IP Colour Camera along with 128 GB or Higher SD Card, housing and mount and all accessories required for installation purposes per RDSO Spec No RDSO/SPN/TC/65/2021,Rev 6.0 with amdt. 1,2 & 3 or latest. (It should be compatible with existing system of VSS). (Inspection Authority: RDSO) | Numbers | 20.00 | 15,398.91 | 3,07,978.2 |
| 2 | Supply, Installation, Testing and Commissioning of Full HD PTZ type IP Colour Camera along with 128 GB or Higher SD Card, housing and mount and all accessories required for installation purposes as per RDSO Spec No RDSO/SPN/TC/65/2021, Rev 6.0 with amdt. 1,2 & 3 or latest. (It should be compatible with existing system of VSS). (Inspection Authority: RDSO) | Numbers | 18.00 | 36,803.99 | 6,62,471.82 |
| 3 | Supply, Installation, Testing and Commissioning of Full HD Fixed Dome type IP Colour Camera along with 128 GB or Higher SD Card, Housing & Mount and all accessories required for installation purposes as per RDSO Spec No RDSO/SPN/TC/65/2021,Rev 6.0 with amdt. 1,2 & 3 or latest. (It should be compatible with existing system of VSS). (Inspection Authority: RDSO) | Numbers | 10.00 | 14,609.22 | 1,46,092.2 |
| 4 | Supply Installation, Testing and Commissioning of Software for VMS and Video Recording software. (Per camera License means Video Management and video recording at multiple locations such as Station, RPF Post & DC Server room covered by the same license) as per technical spec. and functional requirements per RDSO Spec No RDSO/SPN/TC/65/2021 Rev.6 with amdt. 1,2 & 3 or latest.(It should be compatible with existing system of VSS). (Inspection Authority: RDSO) | Numbers | 40.00 | 3,896.18 | 1,55,847.2 |
| 5 | Supply Installation, Testing and Commissioning of Server Hardware for Face Recognition Complete with all accessories as per Clause No. 10.1.1.3 Spec No RDSO/SPN/TC/65/2021, Rev.6.0 with amdt. 1,2 & 3 or latest. (Inspection Authority: RDSO) | Numbers | 5.00 | 7,94,553.41 | 39,72,767.05 |
| 6 | Supply, Installation, Testing and Commissioning of FRS software complete with all accessories (License per camera basis), by same license, Face Recognition can be possible at multiple locations such as Station, RPF Thane and security control room as per Clause No.19.0 Spec No RDSO/SPN/TC/65/2021,Rev 6.0 with amdt. 1,2 & 3 or latest. (Inspection Authority: RDSO) | Numbers | 25.00 | 2,14,075.67 | 53,51,891.75 |
| 7 | Supply, Installation, Testing & Commissioning Analytic Hardware and all accessories required for installation purpose As per Clause No. 10.1.1.3 RDSO Spec No RDSO/SPN/TC/65/2021 with amdt. 1,2 & 3 or latest. (Inspection Authority: RDSO) | Numbers | 5.00 | 7,94,553.41 | 39,72,767.05 |
| 8 | Supply, installation Testing & Commissioning of Storage System for 30 days recording at Station/ RPF/GRP Thane/Post/Sites for recording of Cameras from cluster of station along with all accessories required for installation purposes . The storage should be compatible with the existing NAS and comply with RDSO specifications, ensuring storage capacity for additional cameras for a minimum of 30 days at all five locations (i.e., HD, SCI, BAQ, GUNA, and SVPI). "Note: Bidders are required to quote price for complete storage as a LOT for each camera at each Station/ RPF/GRP Thane/Post/Sites of Division for all types of Cameras mentioned in the Schedule. (Inspection Authority: RITES) | Lot | 40.00 | 9,847.48 | 3,93,899.2 |
| 9 | Supply, installation Testing & Commissioning of Panic Switch (IK10 and IP 66 Rated) with Mushroom Cap Push-Button in Red Color, DPDT contacts 2 Amps , Stainless Steel Face Plate with GI Junction Box of suitable size and flasher cum strobe of min. 100dB including fixing arrangements and suitable protection and all accessories required for installation on each platform at stations or as per site requirement. (Inspection Authority: RDSO) | Numbers | 25.00 | 7,492.65 | 1,87,316.25 |
| 10 | Supply Installation Testing and Commissioning of PC Work Station suitable for Viewing, Monitoring and System Management as per RDSO Spec No RDSO/SPN/TC/65/2021, Rev.6.0 with amdt. 1,2 & 3 or latest.(It should be compatible with existing system of VSS). (Inspection Authority: RDSO) | Numbers | 5.00 | 2,78,298.37 | 13,91,491.85 |
| 11 | Supply Installation & Commissioning of Layer 2 Manageable, 24 Port POE, 24 GE10/100/1000 BaseX Ethernet port with POE+ support and 4x1GE SFP Port for uplink with 4 no of 1GE BX SM SFP modules fully loaded, with all accessories as per RDSO/SPN/TC/65/2021, Rev.6.0 with amdt. 1,2 & 3 or latest. (Switch Should be TTP approved). Inspection Authority: RDSO | Numbers | 27.00 | 47,498.6 | 12,82,462.2 |
| 12 | Supply, Installation, Testing and Commissioning of 24 port manageable Layer 3 switch with 4 Nos of 10G SFP port (fully loaded) and 24 Nos of GE port (fully loaded with 12 optical and 12 electrical SFP's) with all accessories as per Spec. No: RDSO/SPN/TC/65/2021, Rev.6.0 with amdt. 1,2 & 3 or latest. (Switch Should be TTP approved). Inspection Authority: RDSO | Numbers | 7.00 | 82,176.18 | 5,75,233.26 |
| 13 | Supply, Installation, testing and commissioning of 8 port POE manageable field switch with two fiber ports(1G SFP loaded)as per RDSO Spec No RDSO/SPN/TC/65/2021,Rev 6.0 or latest with amdt. 1,2 & 3 or latest. (Switches to be procured from TTP approved sources) Inspection Authority: RITES. | Numbers | 26.00 | 11,025 | 2,86,650 |
| 14 | Supply of STP Cat 6 cable it should be compliant with latest EIA/TIA-568-B.2-1 standard Make-D-link/syrotech/Digisol or similar. Inspection Authority: Consignee. | Metre | 5610.00 | 49.17 | 2,75,843.7 |
| 15 | Supply of CAT6 UTP cable 4 pair in box of 1000 feet. it should be compliant with latest EIA/TIA-568-B.2-1 standard Make -D- link,Delton/Finolex, Havells or similar. Inspection Authority: Consignee. | Boxes | 20.00 | 4,430.73 | 88,614.6 |
| 16 | Supply of power cable 3 core copper (PVC insulated flexible) 3 core X 2.5 Sq. mm. multistrand power cables should conform to specification no. IS: 694:1990 reaffirmed 1995 or latest. Make: D-link,Delton/Finolex, Havells or similar. Inspection Authority: Consignee. | Metre | 7500.00 | 47.62 | 3,57,150 |
| 17 | Supply and wiring of 3 core 4 sq mm, multi strand copper conductor, PVC insulated armoured power cable, confirming to IS:1554 Part-I with OEM test report Make: Finolex/polycab/Orbit or similar. Inspection Authority: RITES. | Metre | 4000.00 | 197.4 | 7,89,600 |
| 18 | Supply of OFC single mode 6 fiber armoured cable. This shall comply standards ISO: 11801 and TEC specification 85010:2003 or latest Make: finolex/polycab/Paramount or similar. Inspection Authority: Consignee. | Metre | 5500.00 | 36.08 | 1,98,440 |
| 19 | Supply and installation of 19" 6U Rack of size: 600mm width x 500 mm deep with hinge door cooling fan, 6 Socket power extension board of 230V/5A, cable manager, partitiontray and accessories with locking arrangement on both door and wall mount arrangement, front section with glass door and lock. Make: Comrack, Rittel,APW, President, HCL, D-link or similar. Inspection Authority: Consignee. | Numbers | 15.00 | 4,541.82 | 68,127.3 |
| 20 | Supply and fixing of outdoor 6U cabinet/rack IP66 suitable for fixing switch/UPS etc . The cabinet should be fixed in the out door pole. necessary power adapter and all accessories required for this work shall be supplied by the contractor. Make : Rackom or similar. Inspection Authority: Consignee. | Numbers | 14.00 | 7,852 | 1,09,928 |
| 21 | Supply, Installation and Commissioning of 2x10 KVA UPS at least 2 Hour Back up in full load condition, connected in parallel redundant mode. with complete all accessories, as per specification attached as Annexure A. This also includes supply of two set MF batteries of suitable AH capacity, rack, one set compatible MCBs complete with cover & fixing materials and one earth leakage circuit breaker arrangement. Inspection Authority: RITES | Numbers | 4.00 | 6,39,176.2 | 25,56,704.8 |
| 22 | Supply of 6 port rack mount LIU loaded with LC/SC/FC coupler and suitable patch chord as per site requirement. Inspection authority: Consignee. | Numbers | 15.00 | 28,579.57 | 4,28,693.55 |
| 23 | Supply of HDPE duct 40/33 mm as per RDSO/SPN/TC/45/2013 Rev.2.0 with latest amendments as available. For each KM of HDPE DUCT following items are to be supplied a) End plugs-2no b) Cable sealing plugs-2 no. c) Plastic couples slip fit/pushfitb type-2 no d) End plugs to be provided along with drum-2 nos. Inspection Authority: Consignee | Metre | 8000.00 | 57.85 | 4,62,805.2 |
| 24 | Supply of 12 core OFC cable with armored ECCS tape (single mode fiber-OS1 ) as per conforming to IEC 60793-1, IEC 60793-2, and to confirm other normative specifications as specified in IEC:60793 Part 1 and Part 2. Make: Network cables or similar. Inspection Authority: Consignee | Metre | 2000.00 | 17.11 | 34,220 |
| 25 | Supply and Installation of 5 Mtrs length CAT6 UTP patch chord (RJ45) factory crimped (Make: D-Link/DIGIL /DAX/MOLEX /KRONE or similar ) (Inspection Authority: Consignee) | Numbers | 18.00 | 351.71 | 6,330.78 |
| 26 | Supply of patch chord 3 meter long of CAT 6 UTP Cable factory crimped. Make: D-link, syrotech, Digisol or similar of reputed make. (Inspection authority: Consignee) | Numbers | 12.00 | 218 | 2,616 |
| 27 | Supply of fiber optic patching cord 5 Mtrs length LC-SC/SC-SC//LC-LC , as per requirement Make: D-link, syrotech, Digisol or similar of reputed make. (Inspection authority: Consignee) | Numbers | 16.00 | 315 | 5,040 |
| 28 | Supply of RJ-45 Connectors. MakeD Link, Digisole, Spectra, Dax, Megabyte, Opti link. (1 Box=100 Nos., (Inspection authority: Consignee) | Boxes | 20.00 | 379.02 | 7,580.4 |
| 29 | Supply of on-line UPS 1 KVA with battery backup of 60 minutes with minimum spec.are as under: Technology: IGBT-PWM.Input Power: Three phase, 300 V - 450,sinewave: 50Hz, out power: Single phase 230Volt, warranty: 3 years. Make/Brand: APC, Luminous, AMCO or similar. (Inspection authority: RITES) | Numbers | 4.00 | 33,981.36 | 1,35,925.44 |
| 30 | Supply and fixing of different size PVC casing and capping in slotted channel through confirming to IS standard as required by Railways at size 47/50 mm . By fixing/clamping at a regular interval to the wall for indoor wiring Make Sudhaker /Modi /Sun / Finolex/AKG or similar. (Inspection authority: Consignee) | Metre | 400.00 | 27.62 | 11,048 |
| 31 | Supply of earth electrode assembly as per Drg. Nos.CR/SK-753. (Inspection authority: Consignee) | Numbers | 4.00 | 902.52 | 3,610.08 |
| 32 | Supply of DWC pipe made of polythene of size 103.5 mm inner dia and 120 mm outer dia. in 6 m length as per IS 14930 part-II along with 1coupler per pipe as per specification IP 67 grade for every 6 mtrs. (Inspection authority: Consignee) | Metre | 24.00 | 326.48 | 7,835.52 |
| 33 | Supply and Provision of multi pin power socket with switch of 5A/15A (6 nos.) wired with 2.5 Sq.mm copper multistrand wire as per site requirement and instruction of site incharge. (Inspection authority: Consignee) | Numbers | 4.00 | 2,385 | 9,540 |
| 34 | Supply of 6A, Double Pole with 2PP 240V MCB, Make: Havells, Anchor or similar (Inspection authority: Consignee) | Numbers | 4.00 | 587.45 | 2,349.8 |
| 35 | Supply of Aluminium Platform single pole step ladder of total extended height of 12 feet, Retracted Height 2 feet, step width 2.5 inches, Gap between Step 1 feet, Maximum Load Capacity kg 140 kg, Maximum Weight of Ladder 10 kg. (Inspection authority: Consignee) | Numbers | 2.00 | 10,800 | 21,600 |
| 36 | Supply and fixing of PVC casing caping 25mm (1 inch) with all accessories. This includes drawing/laying of telecom cables/OFC/Power cable through casing caping and termination of wire at end point and work should be carried out as per the instruction of Railway site engineer. (Inspection authority: Consignee) | Metre | 12750.00 | 31.91 | 4,06,852.5 |
| 37 | Supply and Erection of 15 feet Stainlesssteel (SS) pipe of 4'' dia of 304 grade (3mmthick +/-5% tolerance) Having SS base plate 10mm thick 30cm x 30cm weld at the bottom of the pipe with 4 supports of SS bars of size 10 mm dia. The 3 feet pipe shall be buried in the ground and 12 feet shall be above the ground. The work includes digging of pit on platform, laying of cable, erection of pole, filling the pit with 1:3:4 cement, concrete and sand. Final plastering should be done on the surface. The SS bracket on the top of the pole shall be provided for the fixing of CCTV camera and metal junction box/6U outdoor cabinate with locks and key arrangement with IP66 rating to avoid water entry, to accommadate FMS,5/15A Power sockets of 3 No.s, Media converter etc. (Necessary fixing and other materials including supply of FMS, Splicingof fibers, 5/15A socket with switches 3No.sand termination of power cable etc. required for fixing should be borne by the contractor). (Inspection authority: Consignee) | Numbers | 14.00 | 3,958.23 | 55,415.22 |
| 38 | Supply & Installation of PVC Box water proof at Camera end, as per instruction of site engineer. (Inspection authority: Consignee) | Numbers | 18.00 | 606.39 | 10,915.02 |
| 39 | Supply and Termination of FMS Rack mounting type 19"size for 12F with SC-PC connector loaded with pigtails and termination and splicing of OFC cable as per Rly requirement and fixing in Rack as directed by Engineer representative at site (OTDR readings to be taken and to be submitted for 1310 & 1550 nm) (This includes Transportation of materials from Nominated stores to site). (Inspection authority: Consignee) | Numbers | 8.00 | 5,500 | 44,000 |
| 40 | Supply & Fixing of Stainless steel (SS) pipe with suitable SS couplers (50 mm dia 3mmthick +/- 5% tolerance. SS304 grade) from floor to Roof/FOB with suaitable Stainless steel clamps for every one meter and construction of masonary work for closing gap in the cable entry of pipe from floor for every Roof/FOB (Masonry work in 1Fx1FX1Fdimension) (The work shall be carried out as per the instruction of Railway Engineer at site) (The SS pipe, cement, sand, stonechips, bricks and all other materials required for the work shall be supplied by the contractor). (Inspection authority: Consignee) | Metre | 96.00 | 465 | 44,640 |
| Schedule total | ₹2,48,32,293.94 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
MII_Revision_Order_19July20241.pdf Make in India compliance
ATTACHMENT
TB_merged.pdf
ATTACHMENT
GCCApril2022forWC_compressed.pdf GCC April 2022
ATTACHMENT
GCCACS1to11_compressed.pdf
ATTACHMENT
AnnexureVI-B.pdf
ATTACHMENT
GCCApril2022forWC_compressed.pdf
ATTACHMENT
MII_Revision_Order_19July20241.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .