REPAIR MAINT OF FLOORING ROOF SHEETS CEILING JOINERY AND OTHER CONNECTED WORKS OF OFFRS INSTITUTE MESSES IB AND OTHER CENTRAL AMENITIES AT OLD CANTT UNDER GE GANGTOK

Amount

Taking down chowkats with shutter of any description (without taking down shutter from the frame) n.exc 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats with shutter of any description (without taking down shutter from the frame) exc. 1.5 Sqm and n.exc 4.00 Sqm and removing from site complete all as specified and as directed.

Taking down shutters of any description n.exc 1.00 Sqm each and removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each and removal from site complete all as specified and as directed.

M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints complete all as specified and as directed.

Material and labour for 30mm thick 2nd class HW plain, framed, paneled shutters (two panel) with lock rail and panel of 9mm thick BWP commerical ply or 12mm veneered particle board with commercial face veneering on both faces. The size of rail & stile as per IS : 1003 (Part-I), Kiln, seasoned & chemically pressure, treated complete all as specified and as directed.

S&F 25mm thick flush door shutter, solid core construction, with block board core and plywood face panels. Commerical type on one side and other face covered with decorative face veneer with 6mm thick teak wood lipping/frame to match complete all as specified and as directed.

M&L for 30mm thick 2nd class hard wood well seasoned glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam wood grain PVC sheet on back face complete all as specified and as directed. (As per Drg on Sl page No. 161 of SSR Part 2)

S&F 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified and as directed.

S&F 75mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified and as directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 150mm long aluminium anodised handles, cast type, complete all as specified and as directed.

S&F 100mm long aluminium anodised handles, cast type, complete all as specified and as directed.

S&F 200mm long aluminium anodised tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 100mm long aluminium anodised tower bolts of extruded section and fixed complete all as specified and as directed.

S&F mild steel work as in bands, straps, supports to stays for hold fasts, clamps for eaves board/facia, wind ties bend to shape, holes drilled and similar articles conforming to Fe 290 Gde-E-165 including one coat of red oxide primer complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C2(using 20mm graded stone aggregate) as in fixing of hold fast, bed blocks etc including necessary formwork as required complete all as specified and as directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and as directed.

S&F in repair 18/19 mm thick particle board, medium density flat pressed, single layer type with BWR type adhesive fixed with screws to timber frame work or in pelmets as in repairs including teak wood lipping of 6mm thick all round fixed with nails complete all as specified and as directed.

M&L for 25mm thick, 2nd class hard wood planed one side for repairs to existing floors, with butt joints and fixed with screws complete all as specified and as directed.

M&L for 1st class hard boarding fixed with nails to timber frame work planned one side 15mm thick (Silver Fur) complete all as specified and as directed.

S&F continous (piano) hinges, 30mm width of flap(when open), mild steel, bright finish or electro galvanised fixed with stainless steel screws complete all as specified and as directed.

S&F 75mm Hasp and staple, safety type, anodised aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F 40mm dia, brass polished, bright cupboard knobs fixed with nut, screw and washer finished complete all as specified and as directed.

S&F in repair two lever brass locks, cupboard, grade 1, size 50 mm complete all as specified and as directed.

S&F in repair four lever brass locks, cupboard, grade 1, size 100mm complete all as specified and as directed.

Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site complete all as specified and as directed.

S&F 3mm thick sheet glass panes, ordinary quality and glazing with oil putty including steel pin in square n.exc 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed.

S&F in repairs GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repair 25mm dia aluminium powder coated fancy curtain rod plain or colour as approved with teak wood finish brackets and knobs complete all as specified and as directed.

S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES schedule part-II (2010), Page No. 156 complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelaminated PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelaminated sheet as per specification and drawing egiven on MES schedule Part-II (2010), Page No. 160 complete all as specified and as directed.

S&F in repair door closer hydraulically regualted, Aluminium (die cast) body designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as directed. Note :- Aluminium frame of weight not less than 0.55 Kg/RM Make : Jindal or equivalent approved.

S&F in repair 5.5mm (tinted) sheet glass, ordinary quality in squares exc 0.5 Sqm each pane complete all as specified and as directed.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed. Note :- Aluminium window frame of weight not less than 0.55 Kg/RM of Make Jindal or equivalent approved.

S&F aluminium powder coated of any colour (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. Note :- Aluminium frame of weight not less than 0.55 Kg/RM Make : Jindal or equivalent approved.

S&F alumimum powder coated of any colour (minimum thickness of powder coating 50 micron) window and ventilator shuttrs, side hung type without sash bars,alumimum sections not less than weighing 0.55kg/m including necessary joining cleats,glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such ad peg stays 150mm long(1.no)hinges type B-21 100 mm long (2 nos) suitable handle (1 no)complete all as specified complete all as specified and as directed. Note;Aluminum frame of weight not less than 0.55kg/Rm make Jindal or equivalent approved.

Taking down carefully old aluminum anodised door frame/door shutter fixed type window complete and refixing it after repairing of door/frame shutter,pintal hinges, incl removing and refixing of door closer incl all hinges and all fittings complete all as specificed and directd.

Dismanting structural steel work including doors, gates but excluding framed truss etc complete all as directed.

S & F Mild steel framed work such as grills, gratings, etc. With ends of bars shouldered and/ or riveted, or forged into spikes;framed guard bars;barred iron doors;ladders; framed balusters;walk ways;railings; framework of water tanks and similar work con-forming to Fe-290. Gde- e- 165 complete all as specified & as directed.

S &F for mild steel tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS-1161-1998 GRADE St- 240 including one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication and fixing complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously un- treated steel surfaces of any description over 10 cm in width or girth including preparation of new steel surfaces complete all as specified and as directed.

Taking down cement plaster of any descripition on brick or stone walls, including racking out jonts,hacking for keys, scrubbing down with water etc complete all as specified and directd by the Engr-in- Charge.

Materials & labour for rendering 15mm thick in cement mortar(1.6) on fair of brick or stone masonary of wall surfaces finished surface evev and smooth without using etra cement complete all as specified and as directed.

Material and labour for applying three coats of white washing including preparation of new/ previously untreated surfaces of wall complete all as specified and as directd.

Dismantling old PGI/CGI/ Fiber sheeting any gauge, thickness including Nainital. Sikkim or similar pattern roof/ facia including ridge etc and keeping serviceable sheets in safe custody for re-use complete all as directed.

Materials & labour for 0.63mm thick CGI sheeting, ISI marked with 275 grams per sqm zinc coating with two corrugation side laps fixed with 'L' type or 'J' type or cranked hook bolt and washers in roof covering/ walls etc complete all as specified & as directed.

All as per item no 49 here-in- before but except sheeting but including new hooks,nuts bolts etc complete all as directed.

S & F Galvanised 0.63mm thick plain mild steel sheeting in ridges, hips, valley gutter drip and straight flashing(length and grith as fixed) with grade of zinc coating 275 as in roof all as specified.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in- Charge.

Supply and fix 0.50mm thick pre-paintedgalvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley,eaves,etc fixed with self tapping screws complete all as specifiec and directed by the Engr-in-Charge.

M & L for preparation of newly zinc (or galvanised) surfaces of any descripition over 10 cm in width or girth not otherwise described by coating with mordant solution to receive painting and applying two coats of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old zinc (or galvanised) surfaces of any description over 10cm in width or girth not otherwise described by coating with mordant solution to receive painting and applying two coats of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M & L Preparation of new or previously untreated wooden surfaces of any description exc 10 cm in width and girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & as directed.

Dismantling of wall and ceiling board(fibre pulp,insulation etc)/AC sheets and plywood any thickness and cover fillets and removal of dismantled materials/rubbish from site complete all as specified and dircted.

Materials & Labour for 4mm thick plywood, 5 ply, grade BWR, type BB, fixed with screws to timber frame work in wall/ceiling complete all as specified and as directed.

Materials and labour for 6mm thick plywood, 5 ply, grade BWR, type BB, fixed with screws to timber framework in wall/ceiling complete all as specified and as directed.

Materials & labour For 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails, cross sectional area exc 03sq.cm &n.exc 06 sq. Cm complete all as specified and as directed.

Supply and fix 4mm thick Non asbestos fibre cement building boards (E- board) of approved texture, for insulation and acoustic purpose of size 595x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying teo coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and directed by the Engr-in charge.

Supply and fix powder coated GI snap grid frame work for false ceiling of 605mm x605mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips,size of main tee shall be 23mm x 28mm x 0.33 thick, cross tee shall be 23mm x 28mm x 0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick conforming IS: 733,737 &IS:1285 complete all as specified as per manufacturer's instruction and as directed.

S & F 8-9 mm thick PVC ceiling/wall panels of interlockng types,width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints,internal/external corner trim,corner cove, F/J edge trims where required fixed with hidden screws to and including suitable steel/wooden frame work of width 75mm complete all as per manufactured instructions specified as per manufacturer's instructions and as directed.

Dismantling timber scantling 40sqcm and over in section any positions as in unframed work complete all as directd.

M & L for 2nd class hard wood timber scantling fixed clean swan complete all as specified & as directed.

All as per item No 66 here-in- before but except timber scantling complete all as specified & as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.

Materials & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18sqm but not exc 0.38 sqm as in floors etc conforming to IS- 13712, grade B-II-(a)set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/ bedding layer of 15mm thick in cement mortat (1:6)complete all as specified and as directed.

Materials & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etx conforming to IS- 13712, grade B-II-(a) set jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete al as specified and as directed.

Materials & labour for coloured glazed ceramic tile of size (300mm x 200mm/350mm x 250mm/450mm/350mm)x 7mm thick as in vertical surfaces such as skirting/dado/riser to steps etc conforming to IS-13712 grade B-III set jointed in neat cement cslurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed/ backing layer of 10mm thick in cement mortar (1:4)complete all as specified and directed.

M&L for dark Vitrified ceramic tiles 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, as in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed/bedding layer in cement mortar (1:6) complete all as specified and directed.

Materials and Labour for lacquer coated chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement & pigment, set,jointed and pointed in neat cement slurry in floors cement laid over and including screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete all as directed.

M&L for 18-20mm thick granite slab green in one piece machine cut ,as in steps,jambs,pillars,wimdow cills,cooking platforms and like bedded and jointed with grey cement slurry and pionted with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including rounding to edges of stones slabs such as in steps, cooking platforms, and other similar situations over and including 20mm thick bedding/backing layer in cement mortar (1:6) complete all as directed.

M&L far machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness,M -40 grade with grey cement and no pigment over & including 20mm thick screed bed with CM 1:6 complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonary or precast concrete block walling, built in cement mortar including all quoins, archies,pillars,etc but exclusing ashlar facings,dressed stoneswork and precast concrete articles comlpete all as directed.

M&L for walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM(1:6) including brought upto course at interval of every 60cm including laying PVC pipe in weep holes complete all as specified and as directed.

All as per item No 77 here-in-before but except stone complete all as specified & as directed.

Demolition of precast block masonary or precast concrete article built in cement mortar complete all as specified and as directed.

M&L for pre cast cement concrete block masonry PCC (1:3:6)type C1(using 20mm graded stone aggregate) with solid blocks, exc 10cm in width and setting in cement mortar (1:6) as per IS 383 complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position such as pre-cast manhole cover or slab etc (reinforcement cut as required to facilitate demolition) complete all as direceted by the Engr-in - Charge.

Materials & labour for RCC (1:2:4), TYPE B-1 (using 20mm graded stone aggregate) (nominal mix) as in slab or manhole cover including necessary from work complete all as specified and as directed.

Material & labour for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and simiolar works exceeding 200mm thick for flat fair finished surfaces of concrete complete all as specified and as directed. (Note: This item is not for Sl item No. 82 above)

Material & labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & as directed.

Material & labour for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wir (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.

Demolition to cement concrete of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as cin surface channels and drains including forming fair finished to drain channel complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form,moulds, mitred/stopped ends complete all as specified and as directed.

Demolition to cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), TYPE C-2(using 40mm graded stone aggregate) as in plinth protection;path/hardstanding etc laid in bays/panels not exc 2.00Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen &3 part sand)and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8)type C-2 (using 40mm graded stone aggregate)as in sub base of floor complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C2 as in plum concrete in retaining walls with plums of stone boulders (basalt, trap or any other approved) of size 150mm to 300mm complete all as directed complete all as specified and as directed. Note:(i) Volume of stone boulders should not exceed 25% of concrete. (ii) Stone boulders measured and paid separately under Sl No. 93 item.

Supply only stone boulders (basalt,trap or any other approved) exceeding 15cm upto 30cm complete all as specified and as directed.

Supply and fix in repair Vitreous China squatting pan of 'Orissa pattern' , of size 580 mm x 440mm (white) with integral foot rest 'P' or 'S' trap,front or back inlet, any pattern (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including provision of PCC bedding and connection to trap,and to flushing pipe,antisyphonage pipe,etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make Cera Cat No.COVY S3010104 or equivalent of approved make.

Supply and fixing white vitreous china wash down water closet pan(pedestal pattern)EWC,of size 570 x 460 x 380mm with 'P' or 'S' trap, including fixing bolts, plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminum anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed. Make Cera Cat No.B1510120 Ceraanglo deluxe seat cover or equivalent of approved make.

Supply and fix in repair vitreous china,white colour, flat back, wash hand basin of size 55 x 40 x 79cm fixed with brackets, including providing 32mm dia PVC waste pipe,32mm bore CP waste coupling and making all necessary connections complete as directed. Make :Cera Model CORNET Cat No 1008 or equivalent of approved make.

Supply only pedestal for wash hand basin complete all as specified and as ditrected.

Supply and fix in repairs vitreous china (white) flat back urinal of size 420 x 395 x 635mm, including providing and fixing pluts, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws,ponting around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed. Make : Cera Cat No. 5001 or equivalent approved make.

Taking down eaves gutter and rain water pipes (any size and pattern),including all fittings, heads,shoes, bends, swan necks etc including removal to stores complete all as directed.

S&F PVC(SWR) pipes, half round 150mm bore with rounded edges including all accessories like bend 'T' etc for eaves gutter complete all as specified and as directed.

S&F in repair 150mm bore PVC (SWR) pipe single socketed, in any length with rubber ring jonts fixed to wall with necessary clamps,bolts etc complete all as specified and as directed.

S&F in repair 150mm bore PVC(SWR) bends any radius complete all as specified and as ddirected.

S&F in repair 110mm bore,PVC (SWR) pipes, single socketed in any length with rubber ring jonts, laid in trenches or under floors, fixed on walls with necessary clips complete all as specified and as directed.

Supply and fix in repair 110mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to steel gutter complete all as directed.

Supply and fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as directd.

Supply and fix 110mm bore PVC(SWR) vent cowl fixed in position complete all as specified and as directed.

Supply and fix in repairs 75mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring, joints, laid in trenches or under floors including necessary earthwork, fixed on walls complete all as specified and as directed.

Supply and fix in repairs 75mm bore, PVC(SWR) bend of any radius for PVC(SWR) pipes/steel gutters etc, fixed to walls complete all as specified and as directed.

Supply and fix 75mm bore PVC(SWR) junction double, (Double T) equal or unequal with access door complete all as specified and as directed.

Supply and fix in repair 10 litre capacity low level PVC flushing cistern(white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed. Make : Cera Cat No. B1010101 or equivalent approved.

Supply and fix PVC connections 15mm size with PTMT/Brass nuts of length 600mm complete all as directed by the Engr-in-Charge. Make Prayag Cat No. 323 or equivalent approved.

Taking up or down 15mm bore dia steel water tubings including fittings etc including cleaning for re-fixing or removal from site complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

Refixing 15mm bore GI tubing and connection in new or old position (walls, ceiling and floors etc) including all fittings complete all as specified and as directed.

Supply and fix galvanised steel water tubing 15mm bore medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.

Supply & fix in repair Bib tap, long body cast copper alloy, chromium plated with crutch or butterly handle, screwed down for 15mm bore GI pipe or for brass ferrule including taking down old unserviceable one. Make : Jaquar Code : CON -107 KN or equivalent approved make.

S&F 15mm bore dia angular stop cocks, fancy type, chromium plated, with wall flange screwed down, screwed from iron pipe or union and complete all as specified and as directed. Make : JAQUAR Code- CON 059 KN or equivalent approved.

Supply and fixed 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for GI pipe complete all as specified and as directed. Make : JAQUAR Code CON-CHR-021 KN or equivalent approved.

Supply and fix Brass chromium plated shower rose 120mm size complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat No. OHS-1789 or equivalent approved make.

S&F in repair hand shower(health faucet) 8mm dia alongwith 1m flexible tube and wall hook fixed in position complete all as specified and as directed. Make : Cera F8030103 or equivalent approved.

Supply and fix in repairs CP tubular towel rail 600mm long with and including chromium plated brass screws complete all as specified and as directed. Make : JAQUAR continental series Cat No. 1111 or equivalent approved make.

Supply & fix wall mounted and cold water mixer with connecting lugs and wall flanges, cast copper alloy, chromium plated complete all as specified and as directed. Make : JAQUAR Cat No. SOL-CHR-6119 or equivalent approved make.

S&F stainless steel sink with drainage board made of stainless steel 1.0mm thick for kitchen with plug, washers, waste pipe including cantilever cast iron brackets connecting union of 40mm CP waste fitting and PVC waste pipe of required length with CP/PTMT fly nuts etc complete overall size 915mm x 460mm with bowl size 410mm x355mmx 165mm complete all as specified and as directed. (Make : Nirali Model Elegance or equivalent approved make.

S&F in repairs stainless steel plate rack made of 1mm thick stainless steel and of size 750mm x600mm x 250mm three tier fixed in position complete all as specified and as directed. Make : Blue star, Jayna or equivalent approved make.

S&F 12mm thick toughened glass door fixed to wall with CP casted brass wall to glass hinges (with rubber gasket) fixed with screws to walls and concealed floor spring for frameless door suitable for weight 100 Kgs and door width 750 to 1000mm complete all as specified and as directed.

S&F in repair snow white vitreous china table top wash hand basin including CP waste coupling, bottle trap complete all as specified and as directed. Make : JAQUAR Cat No. KUS-WHT-35935 or equivalent approved make.

S&F in repair CP Soap dish holder including CP screws complete all as specified and as directed . (Make : JAQUAR Cat No. ACN-1131N or equivalent approved make).

S&F in repair CP soap dispenser with glass bottle including CP screws complete all as specified and as directed. (Make : JAQUAR CAT no. ACN-1135 N or equivalent approved.

S&F in repair CP towel ring, square type including CP screws complete all as specified and as directed. (Make : JAQUAR Cat No. ACN-1121BN or equivalent approved).

S&F in repair CP toilet paper holder including CP screws complete all as specified and as directed. (Make : JAQUAR Cat No. ACN-1153S or equivalent approved0.

S&F in repair Glass Shelf assembly consisting of 5.5mm thick sheet glass with CP brackets and CP frame size 600mm long complete all as specified and as directed. (Make : JAQUAR CODE AKP-35771P or equivalent approved.)

S&F in repair CP towel rail, size 600mm long with lower hanger type complete all as specified and as directed. (Make : JAQUAR Code No. AKP-35781PS or equivalent approved).

S&F in repair 5mm thick Glass mirror 700 x 500 mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection on walls fixed to chromium plated brass screws and cup washers (Make : CERA Code No. B3510111 or equivalent approved make).

S&F in repair tumbler with CP tumbler holder and fixing screws complete all as specified and as directed. (Make : JAQUAR Code - AKP-35741P or equivalent approved)

S&F in repair CP basin mixer, single lever without popup waste with 450mm long braided hoses complete all as specified and as directed. (Make : JAQUAR Cat No. ORP-101BPM or equivalent approved).

S&F in repair designer corner glass shelf 25x25cm with CP steel frame complete all as specified and as directed. (Make : Jaquar Code-ACN-1173 or equivalent approved)

S&F CP hand shower with rubit cleaning system, size 100mm round shape single flow including 1.5m long flexible stainless steel hose complete all as specified and as directed. (Make : JAQUAR Cat No. HSH-1937 Hand Shower, Cat No. SHA-571 Flexi or equivalent approved.

S&F CP rain shower (over head) with rubit cleaning system, size 180mm round shape single flow including shower arm of 20mm dia and 300 long complete all as specified and as directed. (Make : JAQUAR Cat No. OHS-1759 Rain shower, Cat No. SHA-479L300S shower arm or equivalent approved.

S&F snow white vitreous china wash down water closet pan (pedestal pattern) 'S' trap one piece EWS 'S' concealed including soft close seat cover, internal twin flush fittings complete all as specified and as directed. (Make : JAQUAR Cat No. FNS-WHT-40751SSM one piece EWC S concealed size 365x360x750mm S-Trap 220mm, Cat No. FNS-WHT-40201 flush fitting or equivalent approved.

KARMA SHERPA

M/S ANIL KUMAR THAKUR

NISHA CONSTRUCTIONS

M/S S. S CHETTRI AND SONS

MAHENDRA KHAWAS

BIJAY MITTAL