WBPWD/EE/ HED / NIeT-105 of 2024-25

Amount

PART A: INTERNAL ELECTRICAL INSTALLATION

Sub-Head--Distribution Wiring

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish as per GS. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC

Average run 8 mtr [2(iii)/E-20]

Average run 9 mtr [2(iv)/E-20]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish as per GS. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC

On Board [3(i)/E-20]

SUB-HEAD-- PLUGS & SOCKETS

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works as per GS.

6 Module [1(b)/E-17]

4 Module [1(a)/E-17]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works as per GS.

2 Module [2(a)/E-17]

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required as per GS. [3(a)/E-17]

Supply & Fixing 240 V 16 A modular key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required as per GS. [3(b)/E-17]

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS. [4(a)/E-17]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS. [4(b)/E-17]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS. [5(a)/E-17]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections as per GS. [5(b)/E-17]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS. [9(b)/E-18]

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.as per GS. [12/E-18]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS. [17/E-18]

SUB-HEAD--BDB,PDB,VTPN ETC

Supplying and fixing double door SPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/L&T/Seimens )

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/L&T/Seimens )

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS ( Make - Legrand )

4 Way (Up to 160A ) [15 / D- 11 ]

8 Way (Up to 160A ) [15 / D- 11 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ]

32A A DP [ 6 / D- 5 ]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand ].

80 A FP [ 10/ D- 8 ] [For Lift Machine Room VTPNDB]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]

6-32 A DP [ 7 / D- 6] [For Mortury Cooler Outdoor Supply]

6-32A FP [ 7 / D- 6] [For 5.0Tr. AC Outdoor Supply]

40A FP [ 7 / D- 6] [For 7.5Tr. AC Outdoor Supply]

63A FP [ 7 / D- 6] [For 7.5Tr. AC Outdoor Supply]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per GS. [11/D-9]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment

Vertical 4/6/8/12 way [ 16 / D- 12]

SUB-HEAD-- Polythene pipe and wires

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe as per GS.

3x1.5 Sqmm [1(b)/E-9]

2x(2.5 sqmm)+1x(1.5 sqmm) [ 1(s) / E-9 ]

2x(4 sqmm)+1x(2.5 sqmm) [ 1(v) / E-9 ]

2x(6 sqmm)+1x(4 sqmm) [ 1(s) / E-9 ]

4x(4 sqmm) + 2x(2.5 sqmm) as ECC [ 1(x) / E- 9 ]

4x(6 sqmm) + 2x(4 sqmm) as ECC [ 1(a1) / E- 9 ]

4x(16 sqmm) + 2x(10 sqmm) as ECC [ 1(g1) / E- 9 ]

Cutting Channel of size (40 mm x 40 mm)/(43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19/25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles as per GS.

19 mm dia 3 mm thick [ 6(a)/ E- 3 ]

25 mm dia 3 mm thick [ 7 (a)/ E- 3 ]

S & F PVC rigid conduit (Precision mk) on wall with saddles as per GS.

20 mm size [ 7(a)/ E- 16 ]

25 mm size [ 7(a)/ E- 16 ]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works

150 mm x 100 mm x 65 mm [11(b)/E-4]

240 mm x 200 mm x 65 mm [11(e)/E-4]

415 mm x 200 mm x 65 mm [11(h)/E-4]

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required

150 mm x 100 mm x 65 mm [12(b)/E-4]

240 mm x 200 mm x 65 mm [13(e)/E-4]

415 mm x 200 mm x 65 mm [14(h)/E-4]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

2.5sqmm [9 (i)/F-5]

4 sqmm [9 (ii)/F-5]

6 sqmm [9 (iii)/F-5]

10 sqmm [9 (iv)/F-5]

16 sqmm [9 (v)/F-5]

SUB-HEAD -CABLE, LAYING, GLAND & SOCKET

Supply of XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make:- Gloster/KEI /Polycab] [NS]

4 Core 70 Sqmm

4 Core 50 Sqmm

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting as per GS. [2©/F-1]

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting as per GS. [2(e)/F-1]

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire as per GS.

Up to 50 sqmm [6(i)/F-3]

From 70sqmm to 150sqmm [6(ii)/F-3]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below as per GS.

4 Core 70 Sqmm [7©/F-4]

4 Core 50 Sqmm [7©/F-4]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as per GS.

4 Core 70 Sqmm [8(b)/F-5]

4 Core 50 Sqmm [8(b)/F-5]

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support as per GS.

With 25x25x3mm angle iron support. 200x50x1.25mm (18SWG)

SUB-HEAD -- FIXING OF FANS

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc. as per GS [10/E-18]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactor finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) as per GS [29/D-14]

SUB-HEAD 6 --MISCELLANEOUS

S & F240V, 16A, 24 Hr. digital time switch (Make: GIC, Model-67DDT0 of Equivelent model of Legrand) as per direction of EIC.

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint as per GS. [5/H-5]

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating as per GS.

100A [ L&T] [ 4( a )/D-3 ]

S&F of 250V single timer DB (equivalent to 10 way SPNDB in size) with double acrylic door sheet steel enclosure, neutral bar, din rail, with lP43 protection comprises with 32A DP MCB(C-curve 10ka) and 1 no 24 hr digital time switch and 1 no. 25A modular type power contactor complete with internal wiring with suitable size of copper wire includ LED indicator and earthing attachment as per direction of EIC. [NS]

S & F 3 phase Dual Timer box Made of 16 SWG MS sheet (size approx– 400 X 350 X 175mm) with powder coated synthetic paint incl. hinged type MS door , inter locking system consisting the following materials : 1) S & F 24 Hr. timer (GIC-67DDT0/Legrand) – 1 no. 2) S & F 440 Volt 40A 3P contactor (L&T ML type) – 2 no. 3) 6 amp auto mannual toggle switch – 1 no. (L&T) 4) Indicating lamp B & G (L&T) – 2 nos. 5) 440V, 40A, 10KA, Cseries FP MCB(legrand/L&T) on din rail for incoming-1 no 6) 100A capacity 4W Brass stud type connector on FRP chair for I/C & 2 nos. O/G- 3 nos All control circuit wiring would be made by 1x1.5 sqmm stranded Cu wire(FRLS) and the I/G & O/G circuit with 1x6sqmm copper wire maintaining colour code incl taping, socketing to complete the work. The box should be fixed on wall with suitable size of flush nut and necy. Connection. [NS]

S & F 3 phase Single Timer box Made of 16 SWG MS sheet (size approx– 400 X 350 X 175mm) with powder coated synthetic paint incl. hinged type MS door , inter locking system consisting the following materials : 1) S & F 24 Hr. timer (GIC-67DDT0/Legrand) – 1 no. 2) S & F 440 Volt 40A 3P contactor (L&T, ML type) – 1 no. 3) 6 amp auto mannual toggle switch – 1 no. (L&T) 4) Indicating lamp B & G (L&T) – 2 nos. 5) 440V, 40A, 10KA, Cseries FP MCB(legrand/L&T) on din rail for incoming-1no 6) 100A capacity 4W Brass stud type connector on FRP chair for I/C & O/G- 2 nos All control circuit wiring would be made by 1x1.5 sqmm stranded Cu wire(FRLS) and the I/G & O/G circuit with 1x6sqmm copper wire maintaining colour code incl taping, socketing to complete the work. The box should be fixed on wall with suitable size of flush nut and necy. Connection. [NS]

SUB-HEAD -- EARTHING

Supplying & fixing earth busbar including Connecting the equipments of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS [4(a)/G-2 ]

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [ 1(a)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe [ 2(a)/G-1 ]

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [ 3(a)/G-2 ]

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. as per GS. [5(d)/G-3]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 4 SWG [5(a)(i)/G-2 ]

No. 10 SWG [5(a)(iv)/G-2 ]

SUB-HEAD -- LT Panel

Supply and Installation of industrial panel suitable for 415V, 50 HZ, AC , 3 Phase and neutral system, stracture made from 75x75x6 MS angle incorporated the following main switches with IP-42/43 protection. The panel should have necessary interconection with incoming and outgoing main switch with busbar by suitable size of conductor and proper earthing attachment.The panel should be powder coated painted and all necessary Shrouds,Cable terminals, Nut-bolts and required accessories. (Make: Approved make of P.W.D.) Incoming : 310/315A, 415V TPN SFU with propet HRC fuse (SS Enclosure) --- 1 no. Busbar Chamber with 4 nos. 630A capacity CU. Bus. Outgoing : i) 125A, 415V TPN SFU with proper HRC fuse(SS Enclosure)---- 3 nos. ii) 100A, 415V TPN SFU with proper HRC fuse(SS Enclosure)---- 3 nos. R,Y,B indicating lamp --- 3 nos. C.T. coil 315A/5A (0.5s class) --- 3 nos. Danger Board --- 2 no. Digital Voltmeter & Ammeter: 1 Nos. Each Make: L&T (NS) All control circuit wiring would be made by 1x1.5 sqmm stranded Cu wire (FRLS) and the I/C & O/G circuit with suitable size copper flat in all Phase & Neutral maintaining colour code with heat shrinkable ---- incl S&F taping, Socketing, brass nut & Bolt etc. to complete the work. Drawing has to be approved by the competent authority in prior.

Part B: Arrangement of External Elcetrification & Fittings Fixtures.

SUB-HEAD -FIXING OF LIGHT FITTINGS

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connecte with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length as per GS [17/C-2]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. as per G.S. [16/C-2]

S&F of 240V, 60W LED street light with IP65 protection complete with all accessories ( Make: Surya Model:- SLE UL 60W IP66 LXN G1,Make: Crompton, Model: CRP-409-60-57-SL-GL-NSG of equivelent model of Magik/Orient) as per direction of EIC. [With 3 years on site warrenty]

S & F mini pole on roof top by 80 mm dia., 2 Mtr. Long GI(M) pipe medium quality (Bansal/Jindal make) incl. making cc (6:2:1) muffing 600x600x750 mm in size with 3 mm thick neatly finished cement plaster incl. S & F 8”x6”x4” C.I. looping cable box incl. S & F 40 mm. dia. G.I.(M) 1.5 Mtr. Long arm bracket for fixing flood light & neccy connection by 2x 1.5 sq mm Cu wire. This is incl. painting as per GS.

S&F of 250V single timer DB (equivalent to 10 way SPNDB in size) with double acrylic door sheet steel enclosure, neutral bar, din rail, with lP43 protection comprises with 32A DP MCB(C-curve 10ka) and 1 no 24 hr digital time switch and 1 no. 25A modular type power contactor complete with internal wiring with suitable size of copper wire includ LED indicator and earthing attachment as per direction of EIC. [NS]

SUB-HEAD - SUPPLY OF LIGHT FITTINGS

Supply of single 4ft LED box type batten complete with all accessories as per direction of EIC. [ Make: Surya, Model- SUB 118 T8 LED, Crompton- Model: CIS-340-20-65-SL-NWH or Equivelent model of Magik/Orient]. [NS] [With 3 years on site warrenty]

Supply of Dual 4ft LED box type batten complete with all accessories as per direction of EIC. [ Make: Surya, Model- SUB 218 T8 LED, Crompton- Model: CIS-340-20-65-SL-NWH or Equivelent model of Magik/Orient ]. [NS] [With 3 years on site warrenty]

Supply of Dual 4ft LED water proof industrial luminaries with batten with polycarbonate housingand diffuesr with IP66 protection complete with all accessories as per direction of EIC. [Make:Surya, Model- SLE DJPC 218 LED: Crompton, Model: IPFC122LT8 or Equivelent model of Magik/Orient ]. [NS] [With 3 years on site warrenty]

Supply of Single 4ft LED water proof industrial luminaries with batten with polycarbonate housingand diffuesr with IP66 protection complete with all accessories as per direction of EIC. [ Make:Surya, Model- SLE DJPC 118 LED/ Crompton, Model: IPFC121LT8 or Equivelent model of Orient/Magik ]. [NS] [With 3 years on site warrenty]

S&F 20/18W LED T-8 lamp with polycarbonate diffuser and metal heat sink as per direction of EIC. [Make:Surya Model- SLE TL DS 18 P AL EXT/ Crompton, Model: LTT8-20 or Equivelent model of Magik/Orrient ]. [NS] [With 3 years on site warrenty]

SUB-HEAD -- FIXING OF FANS

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush and making necessary connection as required by 2x1.5 sqmm flexible copper wire. etc as per GS [ 21 (a) / C-3 ]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter as per GS.

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long)as per GS

Fixing only cabin/Wall fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length as per GS.(29/C-4)

SUB-HEAD -- SUPPLY OF FANS

Supply and delivery of 230V 1200mm sweep ceiling fan [Make: Usha Model: Striker 1200 of equivelent model of CG/Orient] as per direction of EIC.

Supply of Exhaust fans of following diameter complete with all accessories as per direction of EIC. ( Make -EPC )

9"( 230mm ) Speed 1370 RPM [NS]

12"( 300mm ) Speed 1420 RPM [NS]

Supply of 450mm sweep High Thrust wall fan(high speed) with metal body, canopy & blades(Orient - Wall AC18 or equivalent model of Crompton/Bajaj) with necessary nuts, bolts, washer etc. as per direction of EIC.

SUB-HEAD -- Glow Sign Board

Supply & delivery of LED Tube illuminated sign board fabricated by 10''(L)x4'(H)x10"(W) ACP box supported with 35 x 35 x 5 mm M.S. Angle structure all around with 40mm x40mmx 1.62 mm Al. edge angle for front portion only.The front side of the cover will be fabricated with hinges and arrangement in such a way so that it can be opened for maintenance purpose, including mechanical locking arrangement .The 3 mm ACP facial (Blue colour) should be provided with laser cutting of 6 mm laser cut Acrylic letters out of which 5 mm rising and back portion of the ACP board should be pasted with 2mm thick Clear Acrylic Sheet of same size as ACP facial as per the direction of EIC.The sign board should be illuminated by 18W LED Tube lamps (10 nos.) (Type- MAS LED Tube lamp 18 W 2100 lm) with Tube fittings (Phillips make) to be fixed by hooking arrangement with iron stucture fabricated for fixing purpose. Distribution wiring for power supply to LED fittings to be done by PVC rigid conduit, necessary clamps, cable tie etc. Back side of the of the board should be covered with 20 SWG G.I. sheet to protect rain water. The matter to be displayed will be finalised by authority and to be given later.This fabricated display structure is to be fixed on the top of prefabricated iron structure as per direction of EIC.

Fixing of glowsign bloard directly on wall using 3 nos. 4 ft height 50x50x6 mm MS Angle fabricate as C type. Both the end of MS angle should be grouted on wall by using cement concerete & mending the damages incl painting of the iron frame. The glowsing board fixed of the iron structure at the height between 12 to 24 feet from GL by suitable size of nut & bolt incl. hiring of welding machine, manpower & crane if required as per direction of EIC.

SUB-HEAD -CABLE, LAYING, GLAND & SOCKET

Supply of XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make:- RR/Polycab/Havells] [NS]

2 Core 10 Sqmm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as per GS. [2(a)/F-1]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below as per GS.

2 Core 10 Sqmm [7©/F-4]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as per GS.

2 Core 10 Sqmm [8(b)/F-5]

Add GST 18 %

Add Labour Cess 1%

K.C. BYSACK AND SONS (BID ID -5776024)

FAME ENGINEERING (BID ID -5760960)