SPECIAL REPAIR TO 02xOFFICER BUNGLOW P-4, P-6 AND MES MD ACCN TYPE-I, II AND III (12 QTRS) AT MANDIR COLONY UNDER GE (East) JABALPUR

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/ dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/ dense soil, each n.exc 0.5 cum, getting out and removing surplus spoil to a distance n.exc 50 m and making good the disturbed surface complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

Disconnecting existing water storage tank, setting aside (or lowering if required) for repair including cleaning of tank with making it disinfected and hoisting, reconnecting of Capacity exc 500 Ltr but not exc 1000 Ltr capacity of tank complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

M&L for 18-20mm thick granite of approved quality as in platform i.e. in horizontal & vertical position, machine cut (table rubbed and polished) laid over and including 15mm thick rendering in CM 1:6 and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite stone including cutting and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in seps, cooking platform and other similar situations complete all as specified and directed.

Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

M&L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in surface channel and drain including saucer drain and toe wall etc complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate and finishing the surface even and smooth without usimg extra cement complete all as specified and directed.

M&L for RCC M 20 Nominal mix (using 20mm graded crushed stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles, raft etc and mass concrete complete all as specified and directed.

M&L for RCC M20 Nominal mix (using 20mm graded stone aggregates) as in column etc and mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished square, rectangular or polygonal surfaces of concrete complete all as specified & directed.

M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 Cm but not exceeding 10 Cm long complete all as specified & directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) including flush pointing external faces with the same mortar complete all as specified & directed.

Supply only Integral liquid water proofing compound of make as approved by GE complete all as specified & directed.

M&L for brick work with sub class B bricks, modular fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Roughening surface of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc and applying cement slurry @ 2 kg/Sqm complete all as specified and as directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

Taking down shutters of any description, of area not exc 1.0 sqm each size complete all as specified and directed.

Taking down shutters of any description, of area exc 1.0 sqm but not exceeding 4 sqm each size complete all as specified and directed.

M&L for 10mm thick rendering over roof surfaces in CM 1:4 with using liquid water proofing compound @ 2% by wt of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured and paid for separately as "Supply Only" under respective item of BOQ.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.

M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum side over lap of 100mm and end over lap of 150 mm shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.

M&L for applying a coat of bituminous aluminium paint @ 100gm/ sqm over non-accessible roof and blinding material such as dry sand @ 0.75Kg/ Sqm over & including a coat of hot air blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over polymeric membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer as specified for polymeric water proofing membrane.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed..

Dismantling structural steel work including doors, gates, ladder and framed work of watch tower etc complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section, in unframed work in any position complete all as specified and directed.

M&L for 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in timber frame work, rebated or flat edged; fixed with & including suitable size clamps, glue & screws etc as required at site complete all as specified & directed.

M&L for mils steel galvanised powder coated T-grid frame work of make as approved by GE for suspended false ceiling with size of grid 600 x 600mm consisting of main tee/ runner of size 35 x 25 x 1.3 mm, cross tee of size 25 x 25 x 1.3 mm and wall angle of size 25 x 25x 1.5 mm suspended @ 1.2M c/c both way with and including 4mm dia GI wire with J hook, nuts/bolts, butterfly clips, soffit cleat/ rawl plug etc as per manufacturer's instructions and 8mm thick pre-primed, self embossed, textured designer, water & termite resistant calcium silicate boards for insulation complete all as specified and directed. Make: Armstrong or Ramco Industries or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed. Note:- Butt hinge will be measured and paid for separately as "Supply only".

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately as "Supply only".

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

M&L for second class (Indian Sal, Bijasal, Hollock or Benteak) hard wood in scantlings, clean sawn in framed work complete all as specified & directed.

M&L for second class hard wood in scantlings, clean sawn in framed work but except timber complete all as specified & directed. Note:- Old scantling as obtained from "dismantling of timber scantling" here-in-before shall be used after cleaning & stacking and quoted rate shall be deemed to be inclusive of these provisions also.

Supply & fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply & fix 65mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) n.exc. 36mm complete all as specified and directed.

S&F safty type, aluminium anodised with MS pin hinges including bolt to hinge plate and fixed with screws of 100 mm size complete all as specified and directed.

Supply only 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply only 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F self closing shutter hinges, mild steel with steel complete all as directed and specified

suppy and fix heavy duty casement type sliding channel for kitchen shutter upto 600 mm depth of stainless steel complete all as specified and directed.

suppy and fix moduler kitchen trolley of any size and pattern made out of stainless steel wire/sheet of SS304 complete all as specified and directed.

S&F 200 mm long Brass handles, cast type, polished bright SS finish complete all as directed and specified

Supply only aluminium handles 150mm size, cast type, anodised complete all as specified & directed.

Supply and fix aluminium handles 125mm size, cast type, anodised complete all as specified & directed.

Supply and fix MS bow handles 150mm size, oval type, stove enamelled black complete all as specified & directed.

Supply and fix aluminium handles 150mm size, cast type, anodised complete all as specified & directed.

Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type B-21 complete all as specified & directed.

Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type C-22 complete all as specified & directed.

Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and fix 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply only 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and fix 200mm long MS steel barrel tower bolts stove enamelled black with bright bolt complete all as specified & directed.

Supply and fix 125mm long MS steel barrel tower bolts stove enamelled black with bright bolt complete all as specified & directed.

Dismantling of AC (corrugated or semi corrugated etc.) sheets including ridges in roof coverings complete all as specified & directed.

Supply & fix 250mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Supply only 250mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

S&F mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of 250 mm size complete all as specified and directed.

Supplying & fixing 150mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.

Supplying only 300mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.

Dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of barbed wire, any type complete all as specified and directed.

Dismantling of chain link fencing, any type complete all as specified and directed.

S&F chain link fencing as per IS 2721-2003 of mesh size of 50x50mm of 4mm dia mild steel galvanised wire having minimum tensile strength 500N/ Sqmm including line wires (10mm or above dia MS TMT bars as line wire or stiffners shall be used as directed at site), binding wire fixed to any type of standards, rails, straining bolts, etc complete all as specified & directed. Notes:- (i) 10mm and above dia MS TMT bars used as line wire or stiffners shall be paid separately here-in-after as "supply only" in Kg against srl item No 218 of BoQ here-in-after. (ii) Binding wire rates shall deemed to be included in quoted rates for the item. (iii) The galvanizing of wire shall be of minimum 100 GSM as per IS-4826. Make:- TATA WIRON or SAIL or RINL or JINDAL as approved by GE.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6 to 10mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply and fix factory made pre-coated steel windows flash butt welded with side hung shutters including box type hinges with pre-coated handles, pre-coated tower bolts, pre-coated steel peg stay 250mm long with suitable lugs and with glazing bars dovetailed or welded with and including provision of guard bars complete all as specified and as directed. Notes: (i) Wiremesh/ glass panes shall be measured and paid for separately as "supply only" under respective items of BOQ.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames fixed with beads or glazed with putty complete all as specified & directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed.

Supply and fix factory made steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified & directed.

Supply and fixing of modular kitchen trolley of four step and four stand with C handle size and pattern made out of stainless steel wire/sheet of SS 304 Gde complete all as specified & directed.

Supply and fixing of 18 mm thick water proof plywood with both side 2 mm thick mica of approved colour and shade, made of any size as site requirement complete all as specified & directed.

M&L for mild steel work conforming to Fe-290 Gde -165 as in hand rail, half round or other steel section or core for wooden hand rail strait portion, drilled and countersunk for balusters running bars for doors, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or wire staples complete all as specified and as directed.

Supply and fix rolled mild steel sections conforming to Fe- 410-W (Gde E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed.

M&L for mild steel conforming to Fe.290.Gde-E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.

S&F framed work as in iron enclosure, doors or gate of angle iron or other section with gussets plate, rails, braces etc drilled for fixing of steel seating other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account.

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed. Make: Tata Blue Scope Steel Ltd or M/S Cril Colour Roof India Ltd. or Everest Industries Ltd or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed. Make: Tata Blue Scope Steel Ltd or M/S Cril Colour Roof India Ltd. or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

M&L for mild steel work conforming to Fe-290 Gde -165 as in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350x250x7mm or 450x350x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11Sqm but not exc 0.18Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for scratch free light shade vitrified floor tiles, minimum 10mm thick (square/ rectangular) area of each tile not exc 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for scratch free light shade vitrified floor tiles, minimum 10mm thick (square/ rectangular) area of each tile not exc 0.36 Sqm as in skirting/ dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for machine cut kota stone slab as in flooring, 18-20mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for rubbing and mirror polishing of old kota stone surface complete all as specified & directed.

M&L for rubber mould factory made coloured cement concrete chequered tiles with grey cement and pigments 250mm x 250mm x22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed. Make:- Mehtab Tiles, Indore (MP) or Nitco, Mumbai or Mayur Tiles & Interlocking pavers, Lucknow or Star Tiles & Industries, Ramadevi, Kanpur as approved by GE.

M&L for 60mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-35 designation of section as approved by GE in hard standing, laid dry over & including 25mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed. Make:- Mehtab Tiles, Indore (MP) or Nitco, Mumbai or Mayur Tiles & Interlocking pavers, Lucknow or Star Tiles & Industries, Ramadevi, Kanpur as approved by GE.

M&L for machine cut kota stone slab as in skirting/ vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for machine cut cudappah stone slab flooring 30-35 mm thick as in shelf for cooking platform complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement forming joints to full depth at every 3M intervals and at every change of direction and filing with bitumen sand mixture 1:3 by weight complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM (1:6) on surface floor finished fair and even to maintain the proper slope etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,kerbs , kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or deduct for above Item No. 107 for each 25 mmm girth or part thereof over or under 30Cm complete all as specified and directed. Note:- For adjustment only and quantities may be varied (Plus/Minus) to any extend as per site requirement.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 5mm thick rendering in CM 1:4 on fair faces of concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified & directed.

M&L for cement plaster 10mm thick layer of mortar CM 1:4 for laying of wall tiles complete all as specified & directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coats of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply & fix , 5.5mm thick plain sheet glass ordinary quality glazing with and including necessary rubber gasket and aluminium beads with cleats as in aluminium door/ window shutters complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified & directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over and including a coat of red-oxide primer complete all as specified & directed.

M&L for preparing new plastered surfaces of walls and applying wall putty @ 1.0Kg/ Sqm and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete all as specified and directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying one coat of black japan paint as approved by GE complete all as specified & directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

M&L for prepration of old decorated plastered or unplastered surfaces of walls of any description by complete removal of existing treatment and preparation of surfaces for further treatment complete all as specified and directed.

M&L for prepration of old decorated plastered or unplastered surfaces of walls of any description by complete removal of existing treatment using blow lamp complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement base primer complete all as specified & directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 25mm bore of pipe complete all as specified and as directed.

Supply & fix 15mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Supply & fix 20mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Supply & fix 25 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed. Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.

Refixing old steel water tubing 20mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed. Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.

Refixing old steel water tubing 25mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed. Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.

Supply & fix in repairs, 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Make:- Leader or Bombay Metal & Alloy Co. or Zoloto or NMC or Vardhman or BIR Jalandhar as approved by GE.

Supply & fix in repairs, 25mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Make:- Leader or Bombay Metal & Alloy Co. or Zoloto or NMC or Vardhman or BIR Jalandhar as approved by GE.

Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. Make:- Sintex or Tuff or JS Poly Plast or Dhara as approved by GE.

Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. Make:- Sintex or Tuff or JS Poly Plast or Dhara as approved by GE.

Description same as Item No. 147.00 but except water tank.

Supply & fix in repair, 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high dencity plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed. (Note-Min weight should not be less than 210 gms) Make:- PRAYAG SYMET or COMMANDER or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repairs, 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repairs, 15mm dia stop cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

S&F in repairs, 15mm dia bib cock,cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down for iron pipe or brass ferrule complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix aluminium handles 125mm size, cast type, anodised complete all as specified & directed.

Taking down and refixing shutters in the same opening of any description including easing and adjusting, of area exc 1.0 sqm but not exc 2.0 sqm each size complete all as specified and directed.

Taking down and refixing shutters in the same opening of any description including easing and adjusting, of area exc 2.0 sqm each size complete all as specified and directed.

Taking down and refixing shutters in the same opening of any description including easing and adjusting, of area n.exc 1.0 sqm each size complete all as specified and directed. Note for Items Nos. 154.00 to 156.00 :- Fixing of iron mongry/builders hardware shall be included in the quoted rates of these items and builders hardware shall be measured and paid for separately as "Supply Only" against respective items of BoQ.

Resecuring or easing and adjusting, with out taking down shutters of any description of area n.exc 1.0 sqm each size complete all as specified and directed .

Resecuring or easing and adjusting, with out taking down shutters of any description of area exc 1 sqm but n.exc 2.0 sqm each size complete all as specified and directed .

Supply and fix 20 mm, towel rail 600mm long of aluminium anodised tubular towel rail complete all as specified & directed. Make:- PRAYAG SYMET/ COMMANDER or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

S&F in repairs, brass chromium plated wall mixer with three joints suitable for 15mm bore pipe complete all as specified & directed. Make:- Prayag Cat No. K-7475 or equivalent model of make Marc or Gem or Plumber or Seiko or Zoloto as approved by GE.

S&F in repairs, brass chromium plated wash basin mixer of mixing hot and cold water suitable for 15mm bore pipe complete all as specified & directed. Make:- Prayag or equivalent model of make Marc or Gem or Plumber or Seiko or Zoloto as approved by GE.

S&F in repair, brass CP shower rose 65mm dia suitable for 15mm bore GI pipe with swivel joint as approved by GE complete all as specified and directed.

S&F PVC bath cabinet with mirror of size 600x450mm approved colour complete all as specified & directed. Make:- Prayag Cat No. 551 or equivalent model of make-COMMANDER as approved by GE.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 125/100mm PVC (SWR) gully trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts complete all as specified & directed. Make:- PRAYAG SYMET or COMMANDER or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix in repairs vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed. Make:- Prayag Polymer Pvt Ltd or Jain Brothers Sanitation Pvt Ltd or Blue Star Silver Shine or Nirali or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

S&F in repairs grating doom 100 mm dia of mild steel complete all as specified & directed. Make:- PRAYAG SYMET/ COMMANDER or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

S&F of CP peg set of 6 fixed to wall with PVC plugs and screw complete all as specified and directed.

S&F curtain rod fancy type, made out of 25mm dia MS pipe having wall thickness 0.63mm bright finish, colour and pattern as approved by GE, over all dia 28-29mm complete all as specified and directed. Make: Aerolux/ MEC/ Vista.

S&F in repair curtain rod fancy type , PVC coated, made out of 25mm dia MS pipe having wall thickness 0.63mm bright finish, colour and pattern as approved by GE, including curtain ring and bracket complete all as specified and directed. Make: Aerolux/ MEC/ Vista.

S&F mild steel prepainted brackets suitable to hold the drapery rod/ curtain rod 25mm dia and fixed to wall (concrete/ brick masonary) with the help of 2Nos 50mm long steel screws and rawl plug including drilling with electric drill and making good the disturbed surface complete all as specified and directed. Make: Aerolux/ MEC/ Vista.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles not exc 200 cucm each complete all as specified and directed.

S&F in repair toilet paper holder of vitreous china, coloured, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F soap dish of PVC fixed with rawl plugs and screw complete all as specified and directed.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix in repairs vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repair 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix in repair 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix 110mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix 75mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply & fix PVC (SWR) junction single (single T), equal or unequal provided with access door, 110mm bore complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified & directed.

Taking down existing old/ unserviceable sub main wiring of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified and directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one light point controlled by one no one way switch 5/6 Amps complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on the same board with other switches complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.

M&L for point wiring concealed type with 2.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix bell push, single pole one way 5/6 Amps, 240 volts complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 2 pin 5/6 Amps and 3 pin 5/6 Amps, flush universal type complete all as specified & directed.

Supply & fix switch, single pole, 15 Amps flush type, one way switch complete all as specified & directed.

Supply & fix socket outlet 3 pins 15/16 Amps flush type complete all as specified & directed.

Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.

Supply & fix 16 Amps plug socket (2P+E) industrial wall mounted suitable for IP44 degree of protection complete all as specified & directed.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 240 Volts complete all as specified & directed. Make:- Anchor or Cona or Plaza as approved by GE.

Supply and fix angle type lamp holder insulated with polycarbonate body and back plate housed with porcelain base suitable for 9 Watt LED lamp with and including 9 Watt LED bulb complete all as specified and directed. Makes: (i) Anchor/ Plaza for lamp holder as approved by GE. (ii) Crompton or Philips or Havells or WIPRO or Bajaj as approved by GE for 8 Watt LED bulb.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 16sqmm, 2core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 50sqmm, 3core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

M&L for distribution board made out of CRCA sheet including fixing in the wall, cutting chases, grouting and necessary patch work and white wash to match with the existing specification including making connections all as directed containing the followings :- Incoming :- (a) MCCB 4 Pole, 100 Amps, 18 KA breaking capacity with thermal release = 01 No. Make - C&S Cat No.CSESL125FMU4P-*A , Indoasian, Havells, Legrand Outgoing :- (a) MCB TPN 32 Amps 16 KA breaking capacity with thermal release = 02 No. Make - C&S Cat No. CSMBS3C32N, Indoasian, Havells, Legrand (c) MCB SPN 20 Amps 16 KA breaking capacity with thermal release = 08 No .Make - C&S Cat No. CSMBS1C20N, Indoasian, Havells, Legrand (d) bus bar 200 amp rated made out of aluminium insulated with adhesive tape RYB & black ( 4 Nos.). Make - C&S Cat No. TC1D150004, Indoasian, Havells, Legrand (e) Indicator lamp red, yellow and green LED type = 01 set

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 2.5sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

Taking down of existing exhaust/ ceiling fan of any size/ sweep for keeping the safe custody and re-fixing/ re-hanging the same after repair work or as directed and connecting up the same with & including twin twisted copper flexible wire from ceiling rose to exhaust/ ceiling fan complete all as specified & directed.

Supply and fix in repairs, indoor commercial basis all purpose, surface and wall mounted LED batten with polycabonate housing & integrated electronic driver with and including 20 Watt LED tube and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells Cat Part No. LUMILINEBS20WLED830SPCWH or equivalent model of make M/s Surya Roshni Ltd/ Philips/ M/s Insta power Ltd as approved by GE.

Supply and fix in repairs, 45 watt new generation energy saving and environmental friendly long life LED security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07 on bldg wall with and including pipe bracket made of G.I tubing 32/40 mm dia bore medium grade ISI marked 1.20m long bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/ MS clamps & 12mm dia bolts, nuts & washers etc including painting to all and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells Cat part No. ENDURAPEARLNEOSL45WLED757PASYTOPC or equivalent model of make M/s Surya Roshni Ltd/ Philips/ M/s Insta power Ltd as approved by GE.

Supply and fix SPN DB 8 way sheet metal enclosure, IP 43-IK 09 with metal door, 240/ 415 volts with copper bus bar of 100A and neutral bar, earth bar and cable ties for cable management all enclosed on standard steel sheet flush or surface mouting type factory fabricated complete all as specified and directed. Make:- Legrand Cat No. 5076 11 or equivalent model of make L&T/ Havells/ ABB as approved by GE.

Supply & fix MCB SPN, 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- Legrand Cat No. 4086 17 or equivalent model of make L&T/ Havells/ ABB as approved by GE.

Supply & fix MCB SP, 6 to 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- ABB/ Legrand/ Siemens/ L&T/ Havells as approved by GE.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe,post, stay, cable etc or n. exc.10 Sqm on plan and getting out in soft/ loose soil including cutting road surfaces complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. (Note :- Punned thickness will be measured)

Supplying and fixing/ laying of 50mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall including all necessary fittings & clamps made out of 25x3mm flat iron as required for cable protection etc after taking out existing old unserviceable GI pipe with fittings complete all as specified and directed.

Supplying and laying unreinforced precast concrete cable cover, class HVP, type-1, flat, size 300x180x40mm complete all as specified and directed.

M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Supply only mild steel TMT bar 10 mm dia. and over, cut to length, bent to shape required complete all as specified and as directed.

Schedule of credit amount of Rs. 1,19,448.00 to be deducted during AOC

M/S BHATIA CONSTRUCTIONS

DOBARIA BUILDCON

LAL SINGH & SONS