Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
23 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aerospace Composites Division
HINDUSTAN AERONAUTICS LIMITED Aerospace Composites Division Marathahalli Post, Bangalore - 560 037
One time repair, service and CAMC of CCA1, CCA2, and CCA3 Air conditioning, One time repair and service and CAMC of AC plant located in LCH fuel tank building.
8563
HC/IMM/PUR3/MC302-1868/24
Works
Helicopter Complex - Composites Mfg Divn - PUR2
₹0
Exempted
23 Jul 2024
6 Jul 2024
6 Jul 2024
23 Jul 2024
Aerospace Composites Division HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037. INDIA
SCOPE OF WORK -PART-1- TECHNICAL BID
Name of Work: a) One time repair & service of (CCA1, CCA2, & CCA3 ) Air conditioning plant installed at New facility hangar as per Scope of work. b) One time repair & service of AC plant located in LCH fuel tank building as per Scope of work c) CAMC of AC plant (CCA1, CCA2 & CCA3) installed at New facility hangar, for a period of 3 years as per Scope of work d) CAMC of AC Plant along with connected accessories of LUH fuel tank building for a period of 3 years as per scope of work.
Tender Ref No.: HC/IMM/PUR3/MC302-1868/2024
Name of the Vendor/ Firm:
Quotation Ref. No.:
I SCOPE OF WORK Vendor's compliance/Remarks
I Scope of work for One time repair and servicing of Air Conditioning (AC) Plants
II Detailed scope of work: Vendor's compliance/Remarks
1 Interested bidder must visit & inspect the site to ascertain the work involved in the subject scope of work, before submitting the quotation otherwise technical bid will not be considered for evaluation.
2 Vendor needs to repair and do complete overhaul/replacement of the malfunctioning compressors, fan motors, condensers, insulations, copper pipe connections, expansion valves, AHU/blower motors, shafts, electrical accessories, etc.
3 Vendor needs to supply and fill the refrigerant gas, as per the AC plant’s capacity requirements.
4 Vendor needs to perform the pressure test and leak check
5 Vendor needs to arrange for all tools, tackles and manpower required for completing the subject job.
6 It will be the responsibility of the vendor to repair and service the AC plants, along with all the electrical accessories.
7 Vendor should take utmost care while performing the repair activity on the AC plants. Any damage to the AC plant (attributable to the vendor) during the subject job shall be vendor’s responsibility.
III General Conditions. Vendor's compliance/Remarks
1 Interested bidder must visit & inspect the site to ascertain the work involved in the subject scope of work, before submitting the quotation otherwise technical bid will not be considered for evaluation..
2 Vendor shall posses experience in repair and maintenance of AC plants (as per the specifications mentioned below) and documentary evidence for the same should be submitted along with the quotation, otherwise technical bid will not be considered for evaluation.
3 Interested bidders’ quotations are viable for technical rejection if any of the following conditions are true:
3(a) • Lack of experience in carrying out AMC/CAMC of similar or higher capacity AC plants
3(b) • Failure to prove-out the technical competence by the vendor.
3 (c ) • Negative feedback upon market survey, from vendor’s existing/old customers.
IV Scope of work for Comprehensive Annual Maintenance Contract (CAMC) of Air Conditioning (AC) Plants Vendor's compliance/Remarks
Summary: CAMC includes maintenance and repair of all the components of the air conditioning plants as follows:
1 Location - New Facility Hangar - Compressors (including its mechanisms including motors), condenser fan motors (with blades, coils & fins), Air Handling Units (AHU) (including motors fan systems, pipelines & other accessories), humidifier tanks, evaporators coils & cooling systems, expansion valves, safety valves, gas lines and pipe line valves, solenoid valves and cut-outs, limit switches, electrical panels (compressors, AHU, condenser units, strip heaters, pre-filters & fine-filters, drier, recorders, etc., inclusive of spares & gas requirements (excluding HEPA filters).
2 Location - LCH Fuel tank building – Desiccant type air conditioning system PLC (programmable logic control) and HMI (Human machine interface), recuperate type main AHU 13050 CFM @ 75mm static pressure with return air intake section with manually operated RA damper, air cooled DX condensing unit of capacity 11TR x 6 nos. Of scroll compressor, R410A refrigerant, with suction/discharge isolation valves, refrigerant dryer, high/low pressure & overload protection relays, fitted with microprocessor digital controller, electrical control panel with necessary starter, expansion valves, sight glass, necessary joints to connect Dx cooling coils, operating on 415 Volts, 50 Hz, 3 phase, MS stand, etc.
V Detailed scope of work: Vendor's compliance/Remarks
1 Vendor should take over the AC plants for CAMC, in as-is-conditions
2 Vendor should monitor the AC plants continuously during operation and attend the breakdowns immediately after notice OR after receipt of either verbal / written complaint from the user/QA/IMM/plant maintenance departments
3 Vendor should keep, in ready stock, spares required for repair of any component of the plants. Non availability of spares will not be accepted as an excuse
4 Vendor should maintain the up-time of the plants above 95% during the contract period, while maintaining the temperature parameters as detailed below. Up-time means health of the total plants, i.e. keeping the machinery in healthy working state with all the spares & consumables (refrigerants, oils, etc.) as per the prescribed parameters of the AC plants.
5 Vendor should keep the machinery and infrastructure (which are part of the AC plants) clean throughout the contract period, to avoid probable accidents. Regular 5S activities should be carried out by the vendor, at the AC plant locations
6 The personnel deputed by the vendor, for operation of the AC plants, should record the compressor wise parameters, i.e. suction pressure, discharge pressure, oil pressure & general parameters like temperature in the clean room area, every hours during shifting hours. Vendor should obtain the endorsement of in-charge of the user / QA & maintenance depts., at the end of each shift.
7 Vendor should ensure adequate safety measures for their personnel deputed for operation and maintenance of the AC plants
8 Vendor should bring all the necessary tools, tackles, accessories and materials required for maintenance or repair of the AC plants
9 Vendor should obtain material gate pass (based on written request from the vendor) from plant maintenance department, to take any parts/components/consumables/etc. of the AC plants, for repair/replacement, outside the premises of HAL.
10 Vendor should obtain endorsement from the security in-charge on the delivery challan or invoice for the parts/components/consumables/etc. brought for repair/replacement
11 Vendor should ensure to bring back all the parts/components taken out on returnable material gate passes within the time specified in the gate pass, to avoid penalty action. After the return of parts/components, vendor should ensure that all the original copies of returnable material gate passes are returned to maintenance dept., after due coordination of security dept.
12 Vendor should report any abnormality, breakdown, or any bypass made by them, immediately to all three dept i.e. user, plant maintenance and quality depts.
13 Vendor should operate the AC plants in two shifts 7:00 am to 3:00 pm and 3:00 pm to 11:00 pm. In addition, operation and maintenance of AC plants needs to be carried out during extended working hours, Sundays and holidays, as per the requirements projected by user department/ plant maintenance department.
14 Vendor should start the AC plants as per requirements of user dept. and shut off the same at the end of shift, in addition to operation of the plants, during the shift hours, as per the need
15 The operator deputed by the vendor should also monitor the performance of all components of the AC plants and inform the plant maintenance dept. / user dept. immediately, in case of any abnormality noticed
16 The operator deputed by the vendor, should also perform daily and periodic maintenance of the plants, in addition to operating the plants.
17 Vendor should perform preventive maintenance of all the components of AC plants, every three months, as per the checklist mentioned below, in consultation with user / plant maintenance dept. A copy of the PM service report, should be forwarded to purchase department, duly endorsed by Maintenance dept. for reference and records. This PM should be carried out apart from periodical servicing and attending the breakdown calls. Additionally, preventive maintenance should be carried out monthly as per the checklist mentioned below, which includes cleaning of condenser and evaporator coils, with water-jet cleaning of pre-filters.
18 The Plants should be handed over to HAL, after the tenure of the contract, in good working condition
19 Vendor should inform the plant maintenance department in case of power failure, so that DG supply can be provided to the AC plants.
A Daily Checks for New Facility Hangar AC Plant
The following parameters are to be checked and maintained daily:
1 Temperature - 24±2 °C
2 Humidity – 50 to 70% RH
3 Air pressure differential: Positive pressure with respect to adjacent areas of lesser cleanliness.
4 Sampling method for dust level: ACD-HAL shall perform dust level test and the dust level shall be maintained by the vendor for 1,00,000 class controlled contamination area.
5 Note: The above four parameters are to be maintained without fail. If any failure happens on the above parameters, the plants will be considered ‘under breakdown’.
Monthly Checks for New Facility Hangar AC Plant:
1 Cleaning of pre-filters with water/air.
2 Checking air filters, clean if clogged or dirty. Change the bag filter when pressure drop is more than Wg 25mm
3 Cleaning the cooling coils and filters of the AHUs
4 Cleaning of panel contactor
5 Checking of belt tightness
6 Checking of belt alignment.
7 Cleaning of drain tray.
8 Cleaning of drain line.
9 Cleaning of Humidifier tank.
10 Cleaning of blower leaf
11 Servicing of outdoor unit.
12 Checking of outdoor unit pressure (LP & HP)
13 Cleaning of return air grill
14 Checking of heater wiring tightness.
15 Checking the proper functioning of microprocessor and the controls.
16 Checking and cleaning the compressor and fan motor contractor kits.
17 Cleaning the cooling coils and filters of the AHUs and adjust/replace the belt, if necessary.
18 Checking & cleaning of all electrical panels of the system.
19 Checking the proper operation of electronic valves/thermostatic expansion valves. If required these valves are to be replaced to maintain required temperature & humidity condition with CCA1, CCA2 & CCA3.
20 Checking & cleaning of all electrical panels of the system.
21 Check condenser units and check for all fans operational and take necessary action.
22 Check all lubricating points and lubricate as scheduled.
23 Every month vendor should inspect the AHU unit casing for any problem, repair it and corrosion area are to be cleaned & repainted. The repainting is to be done with a rust resistant primer and polyurethane paint.
Quarterly Checks for New Facility Hangar AC Plant:
1 Cleaning of fine filter by compressed air / water jet.
2 Checking all the electrical components/panels for proper functioning and loose joints. Rectify/Replace if found defective.
3 Carryout the leak tests of the A/c unit.
4 Checking the gas pressure, top up if required.
5 Checking the blower motor for proper functioning. Tighten all the terminal connections.
6 Checking blower bearings for any noise. Grease the bearings if needed.
7 Checking / servicing of pumps & motors for proper functioning.
8 Cleaning condenser and evaporator coils by using dry air / water.
9 Checking all the fans of condensers for proper functioning. Take corrective action.
10 Clean the humidifier tank and refill the tank.
11 Checking and servicing of the condenser fan motors, motor bearings, checking the proper function of microprocessor and the controls. To repair/replace controls like, antifreeze thermostat, high-pressure/low pressure cut-outs, oil safety switches and crankcase heaters. Checking fan motor contractor and clean the compressor kits.
12 Cleaning the cooling coils & filters of AHU’S, and adjust/replace the belts if necessary.
13 Checking fan bearing, grease cup should be tight to the bearings.
14 Checking fan belt tension and replace if they are worn out.
15 Tighten electrical and control connection.
16 Inspect coils for dirt build up or coil freeze up.
17 Checking whether all controls are working as adjusted.
18 Inspect the unit casing for corrosion if damage is found, clean and repaint the surface with rust resistant primer and polyurethane.
19 Inspect the condensate drain pan & drain line remove foreign material that might obstruct proper drainage.
20 Checking damper linkage, set screws and blade adjustment. Clean, but do not lubricate, the nylon damper operator.
21 Cleaning of damper operators.
22 Inspect the control and power box wiring for secure connections and insulation.
23 Rotate the fan wheel and check for obstructions in the housing. The wheel should not rub on the fan housing. Adjust the centre if necessary and tighten wheel set screws.
24 Checking conditions of gaskets and insulation around unit door and damper.
25 Examine flex connection for grails or leaks repairs or replace damaged material.
26 Checking joints if leaks are found clean the surface re apply sealant.
27 Checking vibration isolators, replace fatigue ones.
Technical details of Pre filter for New Facility Hangar AC Plant:
1 Filter grade – Pre filter
2 Dimension – Filter size 670 x 645 x 45 mm
3 Dimensional tolerance allowed - ±3mm for the diagonals and -2 to +0mm for other dimensions.
4 Observed dimension – within tolerance limit.
5 Casing – 1mm Aluminum extrusion 45mm thickness.
6 Filtration media – 2 layers of synthetic woven fabric, 2 layer of non woven polyester filter fabric, with aluminum expanded metal throughout the length of media for reinforcement.
7 Sealant – PU based sealant.
Parameter Rated Time observation
Air flow capacity 1500 CFM 1545 CFM
Air velocity at filter face 360 fpm 370 fpm
Initial pressure drop 4mm WC IPD 4mm WC IPD
Micron rating 10 micron 10 micron
Efficiency 90% 90%
Technical details of fine filter for New Facility Hangar AC Plant:
1 Filter grade – Fine filter
2 Dimension – Flange type: 610 x 610 mm; Box type: 540 x 540 x 300 mm
3 Dimensional tolerance allowed - ±3mm for the diagonal and -2 to +0mm for other dimensions.
4 Observed dimension – within tolerance limit.
5 Casing – GI painted – flange type.
6 Filtration media – 1 layer of non woven polypropylene filter fabric, with aluminum tubes at pleat ends.
7 Sealant – PU based sealant.
Parameter Rated Time observation
Air flow capacity 2000 CFM 2045 CFM
Air velocity at filter face 720 fpm 730 fpm
Initial pressure drop 7mm WC IPD 7mm WC IPD
Micron rating 5 micron 5 micron
Efficiency 95% 95%
B Daily Checks for LCH Fuel tank building AC plant:
The following parameters are to be checked and maintained daily:
1 Temperature - 21±2 °C
2 Humidity – below 40% RH
3 Air pressure differential: Positive pressure with respect to adjacent areas of lesser cleanliness.
4 Sampling method for dust level: ACD-HAL shall perform dust level test and the dust level shall be maintained by the vendor for 1,00,000 class controlled contamination area.
5 Note: The above four parameters are to be maintained without fail. If any failure happens on the above parameters, the plants will be considered ‘under breakdown’.
Monthly Checks for LCH Fuel tank building AC Plant:
1 Cleaning of AHU filters
2 Check the refrigerant gas leakage
3 Check the outdoor fan motor
4 Check the AHU V belts tension
5 Check all the equipments of electrical panels.
Quarterly Checks for LCH Fuel tank building AC Plant:
1 Check the washing of outdoor units with condenser coil.
2 Check the cleaning of compressors and refrigeration circuits.
3 Electrical panel items to be checked and to be rectified if defects are found.
4 Check oil level and pressure. Top up the oil and gas, if required.
5 Check the condenser fan motor and rectify if found defective.
6 Rectify any damaged thermal insulation of refrigerant piping.
7 Check the AHU V belts.
8 Cooling air filters to be washed & cleaned OR replaced (if required).
9 Check and top-up the AHU motor oiling and greasing.
10 Cleaning and washing of desiccant dehumidifier air filters. Replacement of the same, if required.
11 Check for defects/damages in electrical.
12 Cleaning of desiccant weal.
13 Desiccant motor’s chain oiling and greasing to be done.
14 Check for damages in heaters and insulation. Rectification to be done if damage found.
Rectification of all types of defects, with all required parts/materials and labor during CAMC of LCH Fuel tank building AC Plant:
1 Replacement of compressors, outdoor fan blades.
2 Replacement/repairing of outdoor motor, outdoor unit PCB and display.
3 Rectification of gas leakage, nitrogen testing vacuuming of system and refrigerant gas charging, etc. including gas welding.
4 Replacement of liquid line drier, copper pipe thermal insulation, electrical connectors.
5 Replacement/repairing of contractors, thermostat and transformer, pressure gauge.
6 Replacement of refrigerant line valves.
7 Electrical panel with all MCCBs, contractors, relays, indication lamps, CTs, volts & ampere meters, controls MCBs, bus bar, etc.
8 Electrical power & control cables like panel to condensing units, panel to pumps and panel to AHU, etc.
9 Air balancing of the supply/return air duct and air diffusers.
10 Replacement/repairing of duct damper, volume control dampers, grills, diffusers. duct thermal insulation & drain pipe.
11 Repair/replacement of Desiccant dehumidifier air filters, desiccant weal, motors, blowers, heaters, electrical items & PCB logic.
12 Repair/replacement of all electrical items (like i/c temp & RH sensors) of PLC/HMI logic.
13 Repair/replacement of all AHU motors, V belts, pulley, cooling coils, heat exchangers, lights, cabinets, etc.
14 Repair/replacement of Heaters along with thermostat, humiditystat, geyserstat, cable insulation sleeve, etc.
List of critical spares for LCH Fuel tank building AC Plant:
Sl No Details Make Qty UOM
1 Air Handling unit (AHU) of capacity 13050 cfm Zeco 1 No
2 Dehumidifier Air Handling unit ( AHU) of capacity 2500 cfm Zeco 1 No
3 Exhaust Air Handling unit (AHU) of capacity 9800 cfm Zeco 1 No
4 Desiccant dehumidifier of capacity 2520 cfm Rehoboth 1 No
5 Air cooled DX condensing unit capacity 11TR Hitachi 6 No
6 Refrigerant copper piping (suction and discharge) Max flow 1 Lot
7 UPVC pipe for condensate drain line Ashirvad 1 Lot
8 Factory fabricated GSS ducting (22 SWG) Zeco 1 Lot
9 Factory fabricated GSS ducting (24 SWG) Zeco 1 Lot
10 MS Supports ISI Mark 1 Lot
11 Thermal insulation with 19mm i/c wrapped with 26 gauge aluminum sheet Kflux 1 Lot
12 Thermal insulation with 9mm thick closed cell Nitrile rubber Kflux 1 Lot
13 Supply air diffuser Systemair 16 Nos
14 Return air diffuser Systemair 16 Nos
15 GI lovers type volume control damper (Manual) Systemair 1 No
16 Motorized UL555S rated smoke and fire dampers Systemair 1 No
17 250A LT Panel with canopy MEC 1 No
18 160A LT Panel with canopy MEC 1 No
19 400A MCCB with enclose MEC 1 No
20 PLC (Programme logic control) and HMI (Human machine interface) Schneider 1 Set
21 Temperature and RH sensor Schneider 10 Nos
22 3 core x 2.5 sqmm armoured copper cable Polycab 1 Lot
23 3 core x 2.5 sqmm armoured copper cable Polycab 1 Lot
24 4 core x 6sqmm armoured copper cable Polycab 1 Lot
25 3 core x 1.5 sqmm armoured copper cable for control cabling Polycab 1 Lot
26 4 core x 1.5 sqmm annealed tinned copper shielded armoured cable for I/O modules Polycab 1 Lot
27 4C x 25 sqmm armoured Aliminium cable ISI Mark 2 Nos
28 GI earth stations
29 Civil works for foundation of AHU and outdoor unit ACC 1 Lot
30 3KW x 15 Nos Finned stripe Heaters Daspass 1 Lot
31 GI cable tray 150 x 50 2mm thick Innospacer 1 Lot
General Conditions.
1 The vendors should either have adequate facility / support + available or would establish the support at Bangalore as the requirement is critical for production.
2 The vendors must visit & inspect the site & ascertain the complete technical details of the plants before submitting the quotation, otherwise technical bid will not be considered for evaluation.
3 Vendor shall posses experience in repair and maintenance of AC plants (as per the specifications mentioned below) and documentary evidence for the same should be submitted along with the quotation, otherwise technical bid will not be considered for evaluation.
4 Interested bidders’ quotations are viable for technical rejection if any of the following conditions are true:
· Lack of experience in carrying out AMC/CAMC of similar or higher capacity AC plants.
· Failure to prove-out the technical competence by the vendor.
· Negative feedback upon market survey, from vendor’s existing/old customers.
Details of the AC plants:
New facility Hangar- AC plant
· Make - Carrier
· No. of Compressors – 12
· Capacity of each compressor – 8.5 TR
· Condenser type – Air cooled
· No. of condensers – 12
· No. of air handling units – 3 (each AHU specifications are 42500 CFM, 110mm Static/30KW motor, fan dia 1120mm)
· Type of refrigerant – R-22
LCH Fuel tank building AC Plant Make - Bitzer
· Make - Hitachi
· No. of Compressors – 6
· Capacity of each compressor – 11 TR
· Condenser type – Air cooled DX condensing units
· No. of condensers – 6
· No. of air handling units – 1 (Recuperate type main AHU, 13050 CFM @ 75mm static pressure)
· Type of refrigerant – R-410A
Aerospace Composites Division HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037 INDIA
APPLICATION & CHECK LIST FOR SUBMISSION (BID FORM )
Name of Work: a) One time repair & service of (CCA1, CCA2, & CCA3 ) Air conditioning plant installed at New facility hangar as per Scope of work. b) One time repair & service of AC plant located in LCH fuel tank building as per Scope of work c) CAMC of AC plant (CCA1, CCA2 & CCA3) installed at New facility hangar, for a period of 3 years as per Scope of work d) CAMC of AC Plant along with connected accessories of LUH fuel tank building for a period of three years as per scope of work.
Tender Ref No.: HC/IMM/PUR3/MC302-1868/2024
Name of the Vendor/ Firm:
Your Quotation Ref No.:
Having examined the bidding documents and having understood the scope of work & terms of HAL as instructed in the tender document, we, the undersigned, hereby submit the bid for providing services as per the schedule of requirements and in conformity with the said bidding documents. We hereby offer to provide Services at the prices and rates mentioned in the Price Bid. We do hereby undertake that in the event of acceptance of our bid, the Services shall be made as stipulated in the schedule to the Bid document and that we shall perform all the incidental (minor) services.
GENERAL INFORMATION (To Be uploaded alongwith Part A)
Sl No Description Details Remarks
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Enclosed / Not Enclosed Related Document to be uploaded with technical bid
4 Address for correspondence:
5 Name & Address on which, The PO should be placed.
6 Contact details:
Contact person name
Ph. No. with STD code
FAX No. with STD code
MSE/SSI/MSME/SC/ST/Genaral (if applicable please furnish the certificate)
7 Registered Contractor
If Registered Contractor with HAL/ Other organisation Yes/ No Related Document to be uploaded with technical bid
Registration No. / UIN No
Additional Note: A) Please provide duly filled ECS mandate form (Attached at Encl - 1), with sign and seal of the bank. The scanned copy of this form should uploaded along with your bid.
B) Please Provide duly filled vendor registration form (Attached at Encl-2) with sign and seal so that we can continue sending enquiries and place purchase order to your reputed organisation.
Name of Authorised Signatory:
Aerospace Composites Division HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037 INDIA
Part-III : PRICE BID
Name of Work: a) One time repair & service of (CCA1, CCA2, & CCA3 ) Air conditioning plant installed at New facility hangar as per Scope of work. b) One time repair & service of AC plant located in LCH fuel tank building as per Scope of work c) CAMC of AC plant (CCA1, CCA2 & CCA3) installed at New facility hangar, for a period of 3 years as per Scope of work d) CAMC of AC Plant along with connected accessories of LUH fuel tank building for a period of 3 years as per scope of work.
Tender Ref No.: HC/IMM/PUR3/MC302-1868/2024
Name of the Vendor/ Firm:
Your Quotation Ref. No.:
General Instructions: 1. The price bid should be complete in all respects and inline with the format given below. 2. Bidder has to quote compulsorily for all the prices below . 3. The sum total of all prices at ( Total Cost =Q will be basis of evaluation)
Sl No Item Description No. of Jobs (A) Unit of Measurement Unit Price (in Rs (B)) Total Unit Price (in Rs (X = A * B)) Taxes-1 in Rs. (Y) Taxes-2 in Rs. (Z) Total Amount in Rs Q=(X+Y+Z) HSN / SAC Code REMARK
1 One time repair & service of (CCA1, CCA2, & CCA3 ) Air conditioning plant installed at New facility hangar as per Scope of work enclosed at Part -1 of Technical Bid 1 Job
2 One time repair & service of AC plant located in LCH fuel tank building as per Scope of work enclosed at Part -1 of Technical Bid 1 Job
3 CAMC of AC plant (CCA1, CCA2 & CCA3) installed at New facility hangar, for a period of 3 years as per Scope of work enclosed at Part -1 of Technical Bid 1 qtr = 1 Job 12 Jobs
4 CAMC of AC Plant along with connected accessories of LUH fuel tank building for a period of 3 years as per scope of work enclosed at Part -1 of Technical Bid. 1 qtr = 1 Job 12 Jobs
Grand Total "Q"
Other charges & taxes ., if any
Tax Details (Mandatory)
Applicable GST Taxes in Percentage (%) and other details
Any other comments
Name of Authorised signatory and Seal
Aerospace Composites Division HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037 INDIA
Part-II : COMMERCIAL TERMS AND CONDITIONS
Name of Work: a) One time repair & service of (CCA1, CCA2, & CCA3 ) Air conditioning plant installed at New facility hangar as per Scope of work. b) One time repair & service of AC plant located in LCH fuel tank building as per Scope of work c) CAMC of AC plant (CCA1, CCA2 & CCA3) installed at New facility hangar, for a period of 3 years as per Scope of work d) CAMC of AC Plant along with connected accessories of LUH fuel tank building for a period of 3 years as per scope of work.
Tender Ref No.: HC/IMM/PUR3/MC302-1868/2024
Name of the Vendor/ Firm:
Your Quotation Ref No.:
Sl. No. HAL Terms Bidders Compliance/ Comments
1 Nature of the contract: A. One time repair & service of (CCA1, CCA2, & CCA3 ) Air conditioning plant installed at New facility hangar as scope of work enclosed at Part I of Technical Bid. B. One time repair & service of AC plant located in LCH fuel tank building as per scope of work enclosed at Part I of Technical Bid. C.CAMC of AC plant (CCA1, CCA2 & CCA3) installed at New facility hangar, for a period of 3 years as per scope of work enclosed at Part I of Technical Bid. D.CAMC of AC Plant along with connected accessories of LUH fuel tank building for a period of 3 years as per scope of work enclosed at Part I of Technical Bid. The value quoted should be firm and fixed during the period of contract. Cost break up and Taxes/duties break up / other charges charges breakup if any to be provided separately. Price quoted should be on F.O.R. Destination basis, for delivery / service at HAL-ACD Stores inclusive of all charges including transit insurance, Inspection, testing & Transportation charges.
2 Payment Terms: (a) Repair - In the event of an order, 100% payment will be made within 30 days after inspection and final acceptance at ACD, HAL (b) CAMC - Payment will be made on quarterly basis within 30 days , after completion of services of each quarter & submission of original invoice of quarterly bill submitted by vendor along with certification from the Maint (HOD)-Dept. Payment will be made through ECS only. a) Kindly indicate your Account No., Banker Name and Address in your quotation. b) Advance payment will not be entertained. c) Bank Account details endorsed by your bank should be uploaded along with technical bid. In case any other terms of payment are offered by vendor, the offer will not be considered for technical evaluation. In this regard, decision is at the discretion of HAL. The decision of HAL is final & binding on all the parties.
3 Validity of your quotation should be for a period of 180 days from the closing date.
4 All items mentioned in the RFQ will be considered in (Package) totality, quoting for only partial items will not be considered.
5 Interested bidder must visit & inspect the site to ascertain the work involved in the subject scope of work, before submitting the quotation otherwise technical bid will not be considered for evaluation.
6 1) Bidder to indicate the time period required for one time repair. (Please mention the delivery terms in days) 2) Bidder to indicate the time period required to start the CAMC order : (Please mention the delivery terms in days)
7 Levies & Taxes: : In the event of placement of order, income tax & TCS will be deducted at source from the charges as per govt Regulations. Please furnish your PAN and GST registration number. Unless the rate at which GST chargable are clearly shown separately, claim for GST will not be entertained later. It would be assumed that rates are inclusive of GST. In case, the vendor wants the taxes to be paid over and above the quoted rates, the taxes, and other Govt. levies should be indicated in detail.
a GST TDS: Under section 51 certain percentage of GST i.e. @ 2% of GST (2% IGST (for Interstate) / 1% CGST + 1% SGST for Intra State) to be deducted by the recipient if the contract value is more than Rs. 2,50,000. TDS will be deducted when • Supplier, place of supply and recipient are in the same state • Supplier as well as the place of supply are in different states TDS will not be deducted if Supplier as well as the place of supply are in same State and the recipient is located in different State . TDS will be deducted at the time of payment or entry on books whichever is earlier
b GST: Vendor should indicate the GST applicable extra in their offer with HSN/SAC. Unless the rate at which GST in terms of SGST, CGST & IGST Chargeable is clearly shown, claim for GST will not be entertained latter and it will be assumed that the rates quoted are inclusive of applicable GST.
c HSN / SAC Code: Vendor to confirm that the applicable HSN / SAC code for the supplied item / Services with GSTIN no. of the company from where the supplies are made are indicated in the offer.
d Vendor to confirm that they have passed on the benefit of reduction of cost due to GST implementation. This is specifically critical in light of the anti-profiteering provision incorporated in the final GST Law.
9 Tender evaluation: a) All items mentioned in the RFQ will be considered in (Package) totality, quoting for only partial items will not be considered. b) Bid with lowest price conforming to the specification/service will be considered for placement of order. c) If the bidder considers that tendered quantity is small, the bidder may quote for Minimum Ordering Quantity (MoQ). Commercial evaluation in this case will be done on MoQ x unit price, if MOQ offered is beyond 20% of RFQ quantity. Evaluation will be done on Landed cost basis. d) If the lowest bidder has not offered full quantity, for the balance quantity HAL reserves the right to source from other bidders on L1 price.
e ) Loading factors : Loading factor will loaded (amount will be added on basic price) in the Comparative Statement, to determine the successful bidder. -----In case of bidders not agreeing for LD clause, LD Factor) : (10-L)*Q/100, Max loading factor 10%, Q: Quoted basic price, L: Maximum rate of LD agreed ------ Delivery Term (DT Factor) : In case vendor quotes on Ex works basis, Loading factor = 0.02*Q ------- In case of payment LC & Advance (PT Factor) : Loading factor will be calculated as below : (for Letter of Credit terms) : LC + ((T/12)*(R/100)*QL)*0.02 (for advance payment ) : ((T/ 12)*(R+2)/100*QA) LC Charges as applicable (LC), LC/Advance duration in Months (T), Marginal Cost of Funds-based Lending Rate (MCLR) per annum (R), Extent of LC payment in Quoted price (QL), Extent of Advance payment in Quoted (QA),
f) If two or more bidders quote the same price, HAL reserves the right to seek revised offer from the same bidders and placing order on revised L-1 offer. If same situation prevails then HAL reserve the right to place order on any of them.
g) Conditional discounts will not be considered in evaluation of tender.
h) Please furnish list of similar equipments / service supplied in HAL or anywhere in India with customer’s full address, value and telephone/telex etc. (if applicable)
i) Quotation should accompany the detailed catalogues and literature.
j) Vendor should confirm that they are the OEM of the stores referred to in this contract and has not engaged any individual or firm whether Indian or foreign whatsoever, to intercede, facilitate or in any way to recommend to the Government of India or any of its functionaries, whether officially or unofficially, the award of the contract to the seller nor has any amount been paid or intended to be paid to any such individual or intended to be paid to any firm in respect of any such intercession, facilitation or recommendation. Vendor accepts that if it is established that the present declaration is in any way incorrect and if at any later stage it amount/commission to such individual/firm, vendor will be liable to pay the similar amount to HAL for engaging such individual/firm and making the payment as commission. In addition, vendor will also be debarred from entering into any supply contract with the Ministry of Defence, Government of India for a minimum period of 5 years. Vendors shall also consider cancellation of the contract without any entitlement or compensation to vendors who shall also be liable to refund all payments made by HAL in terms of the contract along with the interest at the London inter bank offer rate(LIBOR)
k) Quotation should be free from correction, over-writing, using correcting fluid etc.
l) HAL is not bound to accept the lowest or any quotation and reserves the right of accepting the whole or any part of the quotation or part of the quantity offered and bidder must supply the same at the rate quoted.
m) Vendor shall not be entitled without HAL’s consent to assign or transfer to a third party all or part of the benefits or obligations under this contract.
10 Firm Prices: The value quoted should be firm and fixed during the period of contract.
11 Vendor should have police verification certificate for the personnel who is carrying out the job at HAL and also the personnel should follow HAL rules and regulations while carrying out the job.
12 Please furnish the list of your customers with whom you have service/maintenance contract of the system similar to the one indicated in this enquiry. The vendor can forward the supporting documents
13 LIQUIDATED DAMAGES In the event of an order, we reserve the right to collect a sum of 0.5% per week of delay or part thereof, subject to a maximum of 10% as our claim-towards liquidated damages on the undelivered part of the order.The LD amount will be calculated excluding taxation element.
14 Security Deposit : a) The successful vendor, shall have to deposit 5% of the total basic value of the order as Security Deposit within 15 days of receipt of the purchase order, by demand draft or bank guarantee in a prescribed format of H.A.L from a scheduled bank in India, valid up to 60 days after the completion of contract period/last supply. This Security Deposit will bear no interest and will be returned only after the contract is completed to the entire satisfaction of H.A.L.
b) In case the contract is not executed to the entire satisfaction of H.A.L, the security deposit shall be forfeited, besides initiation of risk purchase action.
c) No claim will be entertained against HAL either in respect of interest, if any due on the security deposit or depreciation in value.
d) On due performance and completion of the contract in all respects, the security deposit will be returned to the vendor, without any interest, on presentation of absolute “No Demand Certificate” and upon return in good condition of any specifications, drawings, samples or any other property belonging to the purchaser, which may have been issued to the vendor.
15 Warranty: Warranty shall be as per scope of work (Technical Specification Document) from the date of acceptance of items at HAL or more as per bidders policy, warranty is after the goods have been taken over by HAL, the contractor shall be responsible for any defects that may develop due to faulty materials, design or workmanship and shall remedy such defects at his own cost when called upon to do so by HAL who shall state in writing in what respect the portion is faulty. If it becomes necessary for the contractor to replace or renew any defective portion of the goods the contractor shall make such replacement or renewal without any extra cost to HAL. During warranty minimum uptime of 95% shall be ensured failing which warranty period shall deem to be proportionately extended. During warranty period equipment shall be replaced/repaired free of cost including any to & fro freight/insurance involved. Supplier shall attend to warranty calls within 03 days’ notice.
16 PERFORMANCE BANK GUARANTEE : Vendor shall furnish a Performance Bank Guarantee as per HAL’s format for 10% of total cost of order value valid till end of the guarantee / warranty period from a scheduled bank in India. (In case bidder does not agree for Performance Bank Guarantee / retention of equivalent amount, the offer should be summarily rejected)
17 Earnest Money Deposit (EMD): a. An EMD amount of Rs. 75,000.00 to be submitted in any freely convertible currency of amount equivalent to the above EMD value, in form of original documents i.e. Demand Draft / Banker Cheque /Pay Order/Bank Guarantee/wire transfer drawn in favour of Aerospace Composites Division,Hindustan Aeronautics Limited payable at Bangalore or Bank Guarantee (as per format) is to be submitted through bank or wire transfer. EMD can also be paid through SWIFT / Wire Transfer. It may please be noted that wire transfer from one bank to another generally takes 3 to 4 days. It will be responsibility of the bidder to ensure money is credited to HAL account within the due date and time. All bank charges will be to bidders account. The details of EMD submitted via DD/PO/BC/BG/wire transfer, i.e. reference number, date and name of issuing bank along with the validity date (in case of BG, DD, etc.), & UTR no. in case of wire transfer, should be mentioned clearly in the technical bid. EMD should be submitted on or before the due date & time in a sealed cover with tender reference.
EMD should be submitted only in the specified formats as mentioned above to the following address: Chief Manager (Purchase / Stores), Hindustan Aeronautics Limited, Aerospace Composites Division, Marathahalli post, Bangalore – 560 037 OR Alternatively the sealed cover with tender reference containing only the EMD should be dropped in the tender box of ACD-HAL, kept at Material / Main Gate of ARDC & ACD, on or before the tender due date and time specified in tender. HAL will not be responsible for any transit/postal delay or delay due to any other reasons in receipt of original form of EMD. b. In case any supplier exempted for submission of EMD as per Govt. of India directives, must submit certified copy of GOI’s authority for such exemption in lieu of EMD, with respect to the services required under this RFQ. The relevant certificate should be valid on the date of tender opening. A copy of the relevant certification should be submitted along with the Technical bid. Offers without the relevant certificate would be treated as un-responsive and rejected. Also, while processing the tender as well as if order is placed this certificate should be valid and in case the certificate is not valid, EMD of same value as mentioned in above has to be deposited. c. EMD needs to be submitted by participating bidder. However, the EMD remittance document, either in Indian currency or any other convertible currency of the specified amount, can be arranged by the Indian subsidiary/branch office in India of a foreign bidder which shall be submitted along with a certificate confirming the relationship of subsidiary/branch office in the bidder’s offer. Offers not accompanied with requisite amount of EMD or EMD not submitted in the specified form or offers not having a valid exemtion certificate shall be summarily rejected.
d. Original EMD document / instruments should be submitted with in due date and time. Submission of original EMD document / instruments at later date is not acceptable. Without EMD (subject to provision on para-b above), bid would be considered as unresponsive and rejected. e. In case EMD is submitted in the form of Bank Guarantee, the same is to be submitted in the form of Irrevocable Bank Guarantee from any Scheduled Bank or in case of foreign bidders, from Bank of international repute, directly to HAL’s bank, in the format attached. The Bank Guarantee should be valid for 28 days beyond the validity of the bid (180 days +28 days). f. The EMD will not carry any interest for the period it is retained with HAL. The EMD shall be forfeited if a Bidder withdraws, amends, impairs and/or derogates from tender within validity. g. The EMD amount will be refunded /Bank Guarantee will be returned to unsuccessful bidder(s) as per HAL guidelines. If the Original EMD Document is not received on or before the due date despite having submitted the scanned copy, the bid will be rejected in toto.
18 Bank Guarantee: a. BGs will not be accepted by the Divisions directly from the bidder. BGs should be sent to HAL directly by the issuing Bank. No confirmation of B.G. is required from issuing Bank, if the B .G. executed by Scheduled / Nationalized Banks is received in Banker's sealed envelope. However, in case of BG to be submitted in lieu of EMD, the original BG should be sent to HAL directly by issuing bank within the due date & time and the scanned BG should be submitted along with technical bid. b. In exceptional cases, where the BGs are received through the bidders, the issuing branch is required to immediately (within the due date and time of the tender) send by Registered Post (A.D.), an unstamped duplicate copy of the guarantee directly to HAL with a covering letter to compare with the original BGs and confirm that the same is in order. c. In order to have genuineness of the BG, the name, designation and code numbers of the Bank officer/officers signing the BGs should be incorporated under the signature(s) of the officials signing the BGs.
19 Tender Evaluation: All items mentioned in the RFQ will be considered in totality, quoting for only partial items will not be considered.
20 Restrictions under Rule 144(xi) of the General Financial Rules (GFRs) issue by GoI, Ministry of Finance, Department of Expenditure (DOE).Annexure-II A, Type I or Type II as applicable (To be uploaded on portal) (pdf attached)
21 Additional Terms & conditions Public Procurement (Preference to Make in India), Appendix-A (Type II) (pdf attached)
22 The acceptance of offers and Terms & Conditions is at the discretion of HAL. The decision of HAL is final & binding on all the parties. Disregard of any instructions, may result in your offer being ignored.
23 Any order resulting from this enquiry, shall be governed by these general Terms and Conditions of contract of H.A.L. as specified here and any party quoting against this enquiry shall be deemed to have read and understood these terms and conditions.
24 When counter terms and conditions of business have been offered by tenderer, H.A.L. shall not be deemed to be governed by such terms and conditions unless specific written acceptance thereof has been given by H.A.L.
25 INJURY/CASUALITY: HAL will not be responsible for any injury/causaliity to your personnel while carrying out the releated services as part of contract, you should ensure adequate safety precautions and comply with the statutory requirements.
26 New Firm (Non Registered vendor): Indicate in your quotation, whether you are an approved vendor of HAL and if so by which division of HAL. If you are not an approved vendor of HAL, submit the application for Registration by HAL by downloading application format from our website www.hal-india.co.in with necessary documents. Deemed Registration: Vendors registered in other Defense PSUs will be considered as Deemed Registered. This Deemed Registration will enable the vendors to participate in all future tenders of HAL for similar category of goods/services subject to fulfillment of other eligibility criteria indicated in the tender. However, prior to placing of order, in case the vendor is selected after following the due process/procedure, all the formalities relating to completion of regularization of the Registration Process as per the extant procedure of this will have to be completed.
27 GST Registration Status: i) All the bidders/ Bidders should ensure that they are GST compliant and their quoted tax structure/rates as per GST Act/ Rules. Bidder should be registered under GST and furnish GSTIN number and GST Registration Certificate in their offer unless they are specifically exempted from registration under specific notification/ circular/ section/ rule issued by statutory authorities.
29 CONFILCT OF INTEREST: Conflict of interest, which substantially affects fair competition, shall not be eligible to bid in this tender. Bids found to have a conflict of interest shall be rejected as nonresponsive. A bidder in this Tender Process shall be considered to have a conflict of interest if the bidder: a) directly or indirectly controls, is controlled by or is under common control with another Bidder; or b) receives or have received any direct or indirect subsidy/ financial stake from another bidder; or c) has the same legal representative as another bidder for purposes of this bid. A Principal can authorize only one representative, and the representative also should not represent or quote on behalf of more than one Principal. However, this shall not debar more than one Authorised distributor from quoting equipment manufactured by an Original Equipment Manufacturer (OEM), in procurements under Proprietary Article Certificate; or d) has a relationship with another bidder, directly or through common third parties, that puts it in a position to have access to information about or influence the bid of another Bidder or influence the decisions of the Procuring Entity regarding this Tender process; or participates in more than one bid in this tender process; or e) Participation in any capacity by a Bidder (including the participation of a Bidder as sub-contractor in another bid or vice-versa) in more than one bid shall result in the disqualification of all bids in which he is a party. However, this does not limit the participation of a non-bidder firm as a sub-contractor in more than one bid; or f) would be providing goods, works, or non-consulting services resulting from or directly related to consulting services that it provided (or were provided by any affiliate that directly or indirectly controls, is controlled by, or is under common control with that firm), for the procurement planning (inter-alia preparation of feasibility/ cost estimates/ Detailed Project Report (DPR), design/ technical specifications, Terms of Reference (ToR)/ Activity Schedule/ schedule of requirements or the Tender Document etc.) of this Tender process; or
g) has a close business or family relationship with a staff of the Procuring Organization who: i) are directly or indirectly involved in the preparation of the Tender document or specifications of the Tender Process, and/or the evaluation of bids; or ii) would be involved in the implementation or supervision of resulting Contract. h) In cases of authorised distributors quoting on behalf of their principal manufacturers, an authorised distributor cannot represent two manufacturers or quote on their behalf in a particular tender enquiry. There can be only one bid from the following: i) The principal manufacturer directly or through an authorised distributor on his behalf; and ii) Authorised distributor on behalf of only one principal.
30 Arbitration: Clause for other than DPSUs or PSUs: All disputes or differences whatsoever arising between the parties out of or relating to the construction, meaning and operation or effect of this Contract or the breach thereof shall be settled by Arbitration in accordance with the Rules of Arbitration of the Indian Council of Arbitration or International Centre for Alternative Dispute Resolution (ICA/ICADR) and the award made in pursuance thereof shall be binding on the parties. The provisions of the Arbitration and conciliation Act 1996 or any statutory modifications thereof shall apply to such legislation. Applicable only for MSEs: The Micro, Small and Medium Enterprises Development (MSMED) Act, 2006 provides parties to a dispute (where one of the parties is a Micro or Small Enterprise) to be referred to Micro and Small Enterprises Facilitation Council if the dispute is regarding any amount due under Section 17 of the MSMED Act, 2006. If a Micro or Small Enterprise, being a party to dispute, refers to the provisions in MSMED Act 2006, these provisions shall prevail over the Indian Arbitration and Conciliation Act, 1996 and its statutory modifications thereof.
31 Eligible Goods & Services: a) Country of Origin: The term “origin” used in this clause means the place from where the Services (and incidental Goods, including subcontracted components) are arranged and delivered, or manufactured. b) Bidder’s country which shares a land border with India: Any bidder from a country, which shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority (i.e. the registration committee constituted by the Department for Promotion of Industry and Internal Trader (DPIIT). However, the bidders from those countries (even if sharing a land border with India) to which the Government of India has extended lines of credit or in which the Government of India is engaged in development projects are not required to register with Competent Authority and will be eligible to bid in this tender. Bidder from a country, which shares a land border with India, for the purpose of this Order means:- i) An entity incorporated, established or registered in such a country; or ii) A subsidiary of an entity incorporated, established or registered in such a country; or iii) An entity substantially controlled through entities incorporated, established or registered in such a country; or iv) An entity whose beneficial owner is situated in such a country; or v) An Indian (or other) agent of such an entity; or vi) A natural person who is a citizen of such a country; or vii) A consortium or joint venture where any member of the consortium or joint venture falls under any of the above. Unless otherwise stipulated in the Contract, country of origin of ‘Services’ and related ‘Goods’ under the contract shall have their origin in India or other countries and must conform to the declaration, made by the Supplier in its bid regarding but not limited to any restrictions on certain countries with land-borders with India. The successful bidder shall not be allowed to sub-contract works to any contractor from a country, which shares a land border with India unless such contractor is registered with the Competent Authority.
32 Denial Clause: In case of any delay in delivery caused due to default of the vendor and during such delayed period if any increase in statutory duties and/or upward rise in prices due to the Price Variation Clause (PVC) and/or any adverse fluctuation in foreign exchange arises then such additional amount/s is/are to be borne by the Vendor, apart from the payment of agreed Liquidated Damages. Besides HAL reserves its right to get any benefit of a downward revisions in statutory duties, PVC and foreign exchange rate, taken place during such delayed period, effecting the original agreed price.
33 Non-conformities between Figures and Words Sometimes, non-conformities/errors are observed in the bids between the quoted prices in figures and in words. This should be taken care of in the following manner: a) If, in the price structure quoted, there is discrepancy between the unit price and total price (which is obtained by multiplying the unit price by the quantity), the unit price shall prevail and the total price corrected accordingly; b) If there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and c) If there is a discrepancy between words and figures, the amount in words shall prevail. d) Such a discrepancy in an offer should be conveyed to the Bidder asking him to respond by a target date and if the Bidder does not agree to HAL’s observation, the bid is liable to be rejected.
34 Relaxation of Prior Experience & Prior Turn-over Criteria for Micro & Small Enterprises (MSEs) & Start-ups: Wherever RFQ stipulates qualification/eligibility criteria to be met by bidders such as prior experience and/or prior turn-over, the criterion will be relaxed w.r.t. to all start-ups and MSEs subject to meeting of quality and technical specifications stipulated in the tender. Also vendor shall furnish documentary proof for being MSEs/Start-up as stipulated by the Ministry.
35 Import Content: In case the item/product offered by Indian vendor has import content, then the value of import content shall be indicated in the quotation (in FE/ INR as the case may be).
36 Dispute Resolution Mechanisms : 1 Settlement of Disputes and Arbitration a) Below clause is applicable to organizations other than PSUs/ DPSUs or MSEs or Foreign Vendors: Amicable Settlement: Any dispute or difference whatsoever arising between the parties out of or relating to the construction, meaning, scope, operation or effect of this contract or the validity or the breach thereof shall be settled by bilateral discussions.
37 Obsolescence: Supplier shall continue to support the equipment for a minimum period of 30 years from the date of supply by making available spare parts and assemblies of the equipment supplied. For any reason Supplier wishes/ decides to close/ discontinue the line for manufacture of the products or procurement of certain components, sub-components, Supplier undertakes to notify such a decision to HAL by means of a prior 3 years notice (before closure of the said production line) in writing so as to enable HAL to place buy order/a life time buy of all spares before closure of said production line. Supplier will transfer tools, drawings etc., to HAL after such notice period. Supplier shall indicate the source rom where HAL can procure these items. The said aspect would also form an integral part of the contract.
38 Indemnity: The vendor shall at all times indemnify HAL against all claims which may be made in respect of stores / services for infringement of any right protected by patent, registration of design or trade mark and shall take risk of accidents or damage which cause a failure of supply / services. Vendor should also indemnify HAL against all types of claims from its engineers assigned on work packages.
39 Subcontracting: Subcontracting / Transferring of obligation of Contract arising out of this Tender is not permitted without HAL's prior written consent to assign or transfer such obligations / benefits to third party.
40 Settlement of Disputes and Arbitration: Any disputes / disagreement or question arising out of or relating to consequence of the order / contract which cannot be settled mutually shall be settled as per the provisions of the Indian Arbitration and conciliation Act 1996 which is in line with UNCITRAL. The venue of arbitration shall be BANGALORE, INDIA.All disputes or differences whatsoever arising between the parties out of or relating to the construction meaning and operating or effect of this contract or the breach thereof shall be settled by arbitration in accordance with the rules of arbitration of the ICA/ICADR and the award made in pursuance thereof shall be binding on the parties. The venue of arbitration shall be BANGALORE, INDIA.
41 Applicable law & Jurisdiction: This contract shall be governed by and subject to and interpreted and construed in accordance with the Laws of Republic of India, as may be in force from time to time and the court of Bangalore, India only shall have jurisdiction to deal with and decide any legal matter whatsoever arising out of this contract.
42 Risk Purchase: In the event the SUPPLIER fails to deliver the goods or any consignments thereof within 90 days following the conclusion of the period prescribed for such delivery, HAL reserves the right to procure from elsewhere at the risk and cost of the Supplier and any extra expenditure incurred due to this purchase is payable by the Supplier.
43 Appropriation: Whenever under this Contract any sum of money is recoverable from any sum of payable by the Supplier, HAL shall be entitled to recover such sum by appropriating in part or whole by deducting any sum then due or which at any time thereafter may become due to Supplier in this or any other Contract entered by HAL as a whole or its divisions and branch offices etc. held by him alone or in partnership with others. If this sum is not sufficient to cover the full amount recoverable, the Supplier shall pay to HAL on demand the remaining balance due.
44 Short Closure of the contract: HAL reserves the right to short close this contract with prior notice of one month to the vendor at any time during the tenure of the contract. The liability of HAL in this case will be limited to the extend equivalent to the proportion of the cost of development / testing etc., incurred by you till the point of termination of the contract.
45 Termination of the contract: In case of breach of contract, aggrieved party shall advise in writing to other regarding specific terms of contract which has been breached and will provide reasonable opportunity to improve upon within a specific time period, failing which the aggrieved party have the right to terminate the contract with 1 months notice. Liabilities towards termination shall be discussed and mutually agreed upon.
46 Insolvency: If bidders enter into liquidation, whether compulsory or voluntary (otherwise than for amalgamation or reconstruction) or become insolvent or suffer a receiver of the whole or part of your assets to be appointed They shall forthwith notify the same to HAL and HAL shall have the right without prejudiced to its other rights or remedies to terminate the un-executed part of this agreement. In such an event, HAL shall be entitled forthwith to the refund of all the advance payments, if any.
47 Bribes and Gifts: Any bribe, commission, gift or advantage given, promised or offered by or on behalf of the Vendor or his parties, agent or servant or any one on his or their behalf to any officer, servant, representative or agent of HAL or any person on his or their behalf in relation to the obtaining or to the execution of this or any other contract with HAL shall in addition to any criminal liability which the Vendor may incur, subject to the Vendor to the cancellation of this and all other contracts with HAL and also to payment of any loss or damage resulting from any such cancellation thereof. Any question or dispute as to the commission of any offence under the present clause shall be settled by HAL in such manner and on such evidence or information as they may think fit and sufficient and their decision shall be final and conclusive.
48 Immunity to Government of India It is understood and agreed that the Government of India is not a party to this agreement and has no liabilities, obligations or rights hereunder. It is expressly understood and agreed that HAL is an independent legal entity with power and authority to enter into contracts solely in its own behalf under the applicable Laws of India and General Principles Contract Law. The vendor shall agree, acknowledge and understand that HAL is not an agent, representative or delegate of the Government of India. It is further understood and agreed that the Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, vendor expressly waives releases and foregoes any and all actions or claims against the Government of India arising out of this contract, not to sue the Government of India as to any manner, claim, and cause of action or thing whatsoever arising out of or under this agreement.
49 Agents/Agency Commission: (Note: HAL has not appointed/authorized any person/agent to deal with the vendors in respect of the said contract. In case, if someone claims and interacts with the vendors it shall be duty of the vendors to bring such instances to the notice of HAL Management). The vendor confirms and declares to the Buyer that the vendor is the original manufacturer or authorized distributor/stockist of original manufacturer or Govt. Sponsored/ Designated Export Agencies (applicable in case of countries where domestic laws do not permit direct export by OEMs) of the stores referred to in this offer/contract/Purchase order and has not engaged any individual or firm, whether Indian or Foreign whatsoever, to intercede, facilitate or in any way to recommend to Buyer or any of its functionaries, whether officially or unofficially, to the award of the contract/purchase order to the vendor; nor has any amount been paid, promised or intended to be paid to any such individual or firm in respect of any such intercession, facilitation or recommendation. The vendor agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the vendor has engaged any such individual/firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before or after the signing of this contract/ purchase order, the vendor will be liable to refund that amount to the Buyer. The vendor will also be debarred from participating in any RFQ/ Tender for new projects/program with Buyer for a minimum period of five years. The Buyer will also have a right to consider cancellation of the Contract/ Purchase order either wholly or in part, without any entitlement or compensation to the vendor who shall in such event be liable to refund all payments made by the Buyer in terms of the Contract/ Purchase order along with interest at the rate of 2% per annum above Secured Overnight Financing Rate (SOFR) (for foreign vendor) and Marginal Cost of Funds-based Lending Rate (MCLR) (State Bank of India) plus 2% per annum (for Indian vendor). The Buyer will also have the right to recover any such amount from any contracts/ Purchase order concluded earlier with Buyer.
50 Make In India Considering the huge and continuous requirement, HAL suggests the successful bidder to explore the possibility of manufacturing of the offered items in India to promote Govt. of India’s Make in India Policy. At this stage, HAL proposes to buy the systems/ items directly from the bidder for the firm requirement indicated above. However, for anticipated/future requirement, HAL requests successful bidder to submit the roadmap/proposal for HAL’s review for manufacturing of the offered system/item in India by setting up manufacturing facility in India or through joint venture in India
51 Fall Clause The price quoted shall be in no event exceed the lowest price at which you sell the supplies or offer to sell supplies of identical description for similar quantity/terms to any person(s)/ organization including the purchases by any department of the Govt. of India, the State Govt. or any statutory undertaking of the Govt. of India/ State Govt., as the case may be during the period till the completion of the performance of the order placed and during currency of the order. If at any time during the said period, the contractor reduces the sales price, sells or offers to sell such supplies to any person/ organization including the purchaser or any department of Central Govt. or any Dept. of State Govt., or any statutory undertaking of the Central or State Govt., as the case may be at a price lower than the price chargeable under the contract, Seller shall forthwith notify such reduction/ sale or offer to sale to the HAL and the price payable under the contract for the supplies supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
52 HAL brings to your kind notice that HAL has not appointed any agent in India or outside India for procurement of any items and deals directly with vendor. In case any individual or firm approaches you posing themselves as authorized agent of HAL,it is requested that you should not entertain such claims and in addition inform immediately to HAL.
53 Debarred/ banned or blacklisted : Bidders to confirm whether, they have been debarred/ banned/ blacklisted or not by any Division/ Office of HAL/ PSE/PSU/CPSE/Ministry of Defence or any institutions/offices of State & central GOI. Also upload self certification for not banned status in mandatory documents in eproc portal. If at later stages its been found that your company is banned or blacklisted or if you have provided any false certification, suitable action will be initiated as deemed fit by HAL.
54 EXIT CLAUSE: Exit criteria: The contract/order may be terminated under the following circumstances: In the event of unsatisfactory performance by the Seller during the contract period, or any of the information provided by the Seller is found to be untrue, or Seller is found to have attempted to influence any person involved with the contract through unethical means, the contract shall be terminated with 03 month’s advance notice without any financial implication to Buyer. Notwithstanding the foregoing, in cases where it is found that a Seller is engaged in unethical practices, they shall be barred from participating in the future contracts for a period of 02 years. If there is change in Buyer requirement, contract shall be terminated with 01 months advance notice. The liability of Buyer in this case will be agreed mutually. In the event of termination of contract by either party the Seller shall ensure the following: a) IPR’s are transferred to Buyer to enable Buyer to proceed on the work with other Seller. Seller also will render all assistance till the other Seller fully take over the balance work. b) Transfer title and deliver all or any part thereof of the supplies, materials, work-in-progress, finished Products, Tooling, drawings and data produced or acquired by Seller specifically for the Product being terminated. c) Supply of products and its components / spares at least for a period of 05 years from the date of such termination. d) The Seller is declared bankrupt or becomes insolvent. e) The delivery of material is delayed due to causes of Force Majeure by more than (03 months). f) Based on the decision of the Arbitration Tribunal.
IV QUALITY ASSURANCE REQUIREMENTS
1 Quality System: The vendor shall establish, document, implement and maintain a Quality Management System in accordance with requirements of HAL and/or AS9100, ISO9001 or equivalent.
2 Requirements Flow down: Suppliers are responsible for compliance to all quality clauses. The supplier shall have a process for identifying and reviewing all HAL requirements, including the purchase order, all specifications and drawings, associated documents. Additionally, this includes approved sources for raw materials, processes, and requirements for delivery. The supplier shall be responsible for ensuring that appropriate requirements flow down to sub-tier suppliers.
3 Quality / Inspection System: The supplier shall maintain a quality / inspection system which is in conformance to AS9100 or ISO 9001 to include: Receiving Inspection, First Article Inspection, Manufacturing process inspection, required testing, final inspection, packing and dispatch.
4 Traceability: The supplier shall maintain a documented traceability system for the supplied items to track the details at all stages up to raw material stage.
5 Control of Non-conforming Products: Vendor shall ensure that product/services which does not conform to the requirements is identified, segregated and controlled to prevent its unintended use or delivery.
6 Corrective Action: The supplier shall perform, upon request from HAL, a corrective action investigation when discrepant material is received by HAL. A report will be submitted, within a period of five business days, which is specific and conclusive to prevent a recurrence of the discrepancy.
7 Counterfeit Parts Prevention: Supplier shall maintain a counterfeit parts / material prevention and control plan to ensure that counterfeit parts and materials are not delivered to HAL. Supplier shall give written communication to HAL-ACD if supplier becomes aware or suspects that it has supplied counterfeit parts within 24 hours. Any counterfeit or suspect counterfeit parts/ material delivered to HAL will be controlled by HAL to prevent re-entry into the supply chain. The counterfeit or suspect counterfeit parts / materials must be replaced with non-counterfeit parts. Supplier shall include this clause or equivalent provisions in lower tier supply chain for the parts / materials supplied to HAL.
8 Documents along with delivery : Certificate of Conformance (CoC) from OEM (original equipment manufacturer) with respect to the ordered material should be supplied along with the material. The CoC must contain certification, HAL Purchase order number, specification, revision, and serial numbers; as applicable alongwith signature and title of authorised representative. Any other documents wherever asked in purchase order shall be supplied along with the supply.
9 Source Inspection: Acceptance of supplied parts / material is subject to inspection at HAL. Supply not conforming to the ordered specification will be rejected and information will be communicated.
10 Shipping, handling and storage: The supplier shall provide packing that maintains the quality of the product and prevents damage, deterioration or loss while in transit or while in long term storage.
11 Records retention: The supplier shall maintain records for a period of minimum of 15 years that provide objective evidence of compliance to the purchase order requirements and / or specifications. The records must be legible and must be retrievable within 48 hours of a request.
12 Material Test Reports: The supplier shall provide chemical and physical analysis of raw material demonstrating compliance to the applicable material specification.
13 Our organization reserves the right of access by our representatives, our customers and any regulatory authorities to the applicable areas of the facilities, at any level of the supply chain, involved in the order and to all applicable records.
Our Organization reserves the right to require and request evidence for ensuring that vendor's personnel are aware of - Their contribution to product or service conformity; - Their contribution to product safety; - The importance of ethical behaviour.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Otherdocuments.pdf
TENDER_DOCUMENT • 1.09 MB
ESCmandate.pdf
TENDER_DOCUMENT • 0.01 MB
VendorRegistration.pdf
TENDER_DOCUMENT • 0.48 MB
MC3021868Coveringletter1.pdf
TENDER_DOCUMENT • 0.06 MB
MC3021868Technicalbid.xlsm
TENDER_DOCUMENT • 0.03 MB
MC3021868Generalinfo.xlsm
TENDER_DOCUMENT • 0.02 MB
MC3021868PARTIIIPriceBid.xlsm
TENDER_DOCUMENT • 0.02 MB
MC3021868PartIICommercialTermsAndConditions1.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .