CLEANING MAINT OF SEWAGE SYSTEM INCL ALLIED SERVICES AND REPAIR OF DRAINAGE CULVERT AND PATHWAYS AT JAK LI RTC DHANSAL

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete, all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed .

Material and labour for brick work with old size sub class 'B' burnt clay bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks (except bricks), straight or curved on plan exceeding 6 metre mean radius in cement mortar 1:4, complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

M&L for Stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built with CM 1:4 complete all as specified and directed.

M&L Stone walling (except stone) of random rubble, uncoursed, well bonded, bedded and solidly hearted, built with CM 1:4 complete all as specified and directed

M&L for extra over stone walling for hammer dressing to face hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with granite or trap stone for 20 mm complete all as specified and directed.

M&L for racking out joints/ pointing to masonry or brick work in single detached joints for flashing etc complete all as specified and directed

M & L raised pointing in cement mortar 1: 4 to random of polygonal rubble, uncoursed or brought upto courses complete all as specified and directed

M & L providing pre- cast cement conrete type C-1 1:3:6 (20 mm graded stone aggregate) as bonders in stone walling and set in CM 1:6 complete all as specified and directed

Material and labour for Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work complete all as specified and as directed.

Material and labour for Plain Cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.

M& L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds, mitred.

M& L for Add or deduct for each 25 mm girth or part there of over or under 30cm inner girth in cement concrete using extra cement incl forms, moulds, mitred complete all as specified and directed.

75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.

25mm thick sand cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M&L for Factory made, Machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 60 mm thick, M-35 grade (medium Traffic), with grey cement & pigment, complete all as specified and directed.

M&L Machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm, jointed and pointed with mixture of white & grey cement in equal prapotion and pigment to match the colour of tiles complete all as specified and directed.

M & L screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Mild steel rolled section as in grating framed, trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc. confirming to grade Fe-290. Gde- E-165. complete all as specifed and directed.

S&F, Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified.

M & L for cement concrete type B-2 1:2:4 (20 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases). complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not other wise described and applying two coat of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of cement concrete ( reinforced) other than ground floors, beams stair cases, landings, chajjas and similar suspended work not exc. 15 cm thick (reinforcement cut as required to facilitate demolition) complete, all as specified.

Use and waste form work to sides and soffits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams etc for flat rough finished surfaces of concrete complete all as specified and directed.

Use of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed

M & L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L mild steel TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for providing RCC 1 : 2 : 4 Type B1 (20 mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out loose soil complete all as specified and directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed by the Engineer-in-Charge.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

Non skid coloured joint free ceramic tiles 300x300x 6-7mm thick in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4,complete all as specified and directed.

Glazed ceramic tile 450X350mm X 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified and directed.

Demolition and breaking up 150mm dia SGSW/ AC or reinforced conerete pipes set in cement mortar and taking out of trenches complete all as specified and directed.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed.

M&L for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L pre cast cover RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slab for manhole, septic tank etc set in cement mortar (1:6) including formwork all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in benching, haunching of man holes,in surface channels and drains. complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting of existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-0, smooth finished and reforming benching as reqd for into dia/bore of pipe ‘150 mm’ complete all as specified and directed.

Demolition/ Dismantling and breaking up old PVC drain pipes of 75/110mm dia jointed in cement mortar and taking out of trenches and removing materials from site of work complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe single socketed, in any length fixed to wall with rubber ring joint, ISI marked complete all as specified and directed.

S&F 75mm bore PVC(SWR) pipe single socketed, in any length fixed to wall with rubber ring joint, ISI marked complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe single socketed, in any length laid in trenches or floor with rubber ring joint, ISI marked complete all as specified and directed.

S&F 75mm bore PVC(SWR) pipe single socketed, in any length laid in trenches or floor with rubber ring joint, ISI marked complete all as specified and directed.

S&F in repairs PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and directed.

S&F PVC connections pipe 15mm with PTMT nuts of length 450mm. complete all as specified and directed.

S&F 110mm bore (any radious) PVC (SWR) bend, ISI marked complete all as specified.

S&F 75mm bore (any radious) PVC (SWR) bend, ISI marked complete all as specified.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound including finishing the surface even and smooth without using extra cement complete all as specified and directed. (supply only of W P C shall be measured and paid separately).

M&L Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified.

S & F for Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

Ball valves, high pressure of brass with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed in repair complete all as specified.

S&F in repairs vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm white (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and directed.

S&F in repairs PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets complete all as specified and directed.

S&F in repairs flush pipe of polyethylene of low or high density, 32 mm dia for low level cistern including taking down old pipe, complete all as specified and directed.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 630x450mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc. complete all as specified and directed.

M&L 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs grating round 125mm size of PTMT fixed with cement motar.(Min weight 40 gms) complete all as specified and directed.

M & L for dismantling of water tank of capacity exc 500 and not exc. 1000 litres and removing to store and supply and fixing of 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for refixing or removal complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for refixing or removal complete all as specified and directed.

S&F 15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and directed.

S&F 20mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and directed.

S&F in repairs angle stop valve of 15mm size PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs stop valves cast copper alloy but fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.

S&F in repairs stop valves cast copper alloy but fancy type chromium plated with long shank and cup (Concealed type) screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm,complete all as specified and directed.

S&F in repairs gate valves, with iron wheel head, screwed both ends for bore of 15 mm pipe complete all as specified and directed.

S&F in repairs pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, ccomplete all as specified and directed.

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and directed.

Cleaning of septic tank and soakage well any size by dewatering, taking out mud/sludge/liquid from septic tanks, soakage wells getting out and removing & depositing the sludge to a distance not exceeding 100meter in borrow pits, excavating borrow pits and covering the filled borrow pits with minimum 10cm thick layer of earth and 2 cm thick lime on top surface to prevent spread out of foul smell. After taking out sludge and solid deposits, the inside of the septic tank shall be cleaned with water, complete all as specified and directed.

Cleaning & clearing of underground sewage line not exceeding 150mm bore at any depth & description, alongwith manholes (by taking off manhole covers and refixing the same after cleaning) by removing any type of blockage including desilting and de-chocking manually by rodding pumping etc including disposal of sludge /sludge water at authorised dumping site as directed by the Engineer-in-Charge.

Cleaning of blockage manually by rodding, pumping etc and removing the deposited sludge/solid/liquid material, at authorised dumping site as directed by Engineer-in-charge, complete from the following :-

Water closte any description including trap and CI pipe line upto first manhole

Floor Trap/Nahni Trap upto Gully trap

Pipe from gully trap upto first manhole (excluding gully trap)

MADAN LAL SHARMA AND SONS

SINGH CONST CO

M/S SANJAY STEEL WORKS

MAHADEV ENTERPRISES

MandeepConstructionCo

SUBASH CHANDER

M/s Khajuria Construction Co.

M/S PAWAN KUMAR ANAND

K S BUILDERS