Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical SH 12 SHREE SHRADDHA CHS LTD SWAGATAM COMPLEX JESAL PARK BHAYANDAR E THANE 401105 | BHAYANDAR E | THANE | MAHARASHTRA | 401105 | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical B 22 SHREE SHARADDHA CHS LTD SWAGATAM COMPLEX JESAL PARK BHAYANDAR E THANE 401105 | BHAYANDAR | THANE | MAHARASHTRA | 401105 | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
₹23.9 L
EMD Value
₹47,720
Closing Date
15 May 2026, 6:55 pmClosed
OIC, Engineering, TMC on behalf of Director, TMC
Engineering Department, 6th Floor, Service Block, TMH, Parel
Renovation and Refurbishing of Biomedical Department, 1st floor, Main Bldg, TMH
2026_TMC_905649_1
TMC/ENG/RenBiomedical/26-27/02
Open Tender
Civil Works
Works
120 days
TMH, Parel
As per tender document
6 documents required · 6 mandatory
₹0
₹47,720
TMH, Parel
4 May 2026
17 Apr 2026
18 May 2026
17 Apr 2026
15 May 2026
24 Apr 2026
17 Apr 2026 - 21 Apr 2026
22 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying poly vinyal chloride (PVC) rolls of 1.5m / 2.00 mtr width manufactured by approved pattern/colour and design for flooring, skirting/dado/ laid or existing smooth cement tile or concrete of plastered finish with suitable adhesive as per manufacturers specifications close jointed and finished to proper bends, slopes and plumbs as directed etc. complete including making leveling existing surface with POP & adhesive to make surface proper laying generally as per manufacturer’s specifications. PVC approved make , approval by Engg-in-charge. | |||||
| 1.01 | 2mm thck PVC flooring | - | sqm | - | - |
| 2Providing and fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides and shelves and 6mm commercial ply approved make for back side.Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1.0mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges lipping with 6mm laminate finish Thick T.W.lipping patti.locking arrangement with Godrej multipurpose lock etc. All inside areas shall be .80mm thick approved colour laminate etc.all complete as specified and directed by Engineer-In-Charge. | |||||
| 2.01 | With inner side 0.8mm thick laminate
With shutter | - | sqm | - | - |
| 3Drawer Unit Below Table :- Providing making fully drawer storage unit made up of 19mm thick commercial plywood with heavy duty sliding channel & with 6mm thick commercial plywood for back , 19mm plywood for top,bottom, shelves drawer front etc. side of drawer to be of 12mm thick & bottom to be as per requirement & bottom to be as per requirement. 1.0mm thick approved laminate to be fixed over exposed surfaces of the unit & non laminated area to be 0.80 mm thick laminate of white / off white. Hardware items such as lock, hinges tower bolt, handle to be of heavy duty & approved make only. a) Fixed type drawer unit b) Moveble type drawer unit | |||||
| 4Providing making and supplying computer table made out of19mm commercial ply for table top, mounted on the vertical side of 19mm thick approved make drawer unit will be cabinet commercial ply and made out of 19mm commercial ply for sides, shelves and shutters or drawers with heavy duty sliding channel shown in drawing ready mode key board drawer with heavy sliding channels, all edges shall be lipped with 6mm thick T.W. lipping patti or are edge beeding matering with laminate. All exposed faces should be 1.0mm thick laminate of approved colour and non laminated area should be 0.80 mm thick white / off white laminate including cost of other materials labour etc. as per drawing and as specified and directed by Engineer-In-Charge. | |||||
| 4.01 | Computer table with all inner surface with 0.8 mm thick approved laminate | - | Rmt | - | - |
| 5Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 5.01 | 1mm thick with zinc coating not less than 275 gm/m² | - | sqm | - | - |
| 6Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: | |||||
stage.html
html • 0.02 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.84 MB
Makelistss.pdf
Tender Documents • 0.16 MB
techdocumentchecklist.xls
Tender Documents • 0.03 MB
BOQ_951930.xls
BOQ • 0.30 MB
corrigendum02.pdf
PDF • 0.09 MB
corrigendum01.pdf
PDF • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .