Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹40.4 L+₹5.2 L (14.9%)Rejected-Finance 00 KANDHARPUR NEAR JUNIOR HIGH SCHOOL KANDHARPUR BAREILLY UTTAR PRADESH 243004 UDYAM UP 15 0021222 | BAREILLY | UTTAR PRADESH | 243004 | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹44.7 L+₹9.6 L (27.3%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | L4₹48.3 L+₹13.2 L (37.5%)Rejected-Finance | L4 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | M/S Shri Balaji Enterprises L2 | M/s Krishna Construction Co. L1 | SMS Enterprises L4 | M/S SUNIL TRADERS L3 |
|---|---|---|---|---|---|---|---|
| 1.00CHARPOY GI PIPE WITH NYLON NEWAR: FD-220: S & F following components of Charpoy including dismantling taking out carefully & replace old components of Charpoy Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 2330 | |||||||
| 1.01 | Removing of Old / unserviceable newar from existing Charpoy GI Pipe,Reassembling/ tightening of Charpoy frame and supply and fixing new 12mm thick plywood BWR grade, ISI marked conforming to IS-303 of size 6.5'x3' (6.5x3 feet). Half round teak wood beading of best and approved quality shall be provided to all round the plywood and shall be fixed with new headless nails and duly pasted with best quality dendrite adhesive. The half round beading so fixed shall be french polished with high gloss finish all as directed by the Engineer-in-Charge. (The contractor has to submit purchase voucher and a manufacturer certificate for plywood). | 2,330 | Each | 1,149 ₹26,77,170 | 1,100 ₹25,63,000 Lowest | 1,290 ₹30,05,700 | 1,274 ₹29,68,420 |
| 1.02 | Provision of 02 Nos of 900mmx40mmx5mm MS flat iron stiffners of best quality duly grinded at all the edges and fixed with round headed stainless steel nut and bolts with washer of suitable size i.e. 62 to 65mm long, 6mm dia across the long rail at equal spacing. MS flat iron strip shall be painted with two coats of synthetic enamel black paint over a coat of red oxide primer. 10 Nos in total of round headed stainless steel nuts and bolts with washer of superior quality of suitable size as mentioned above shall be provided for fixing the plywood on the Charpoy GI Pipe alongwith the MS flat iron stiffners by drilling holes 02 Nos each in long rails, 02 nos each in short rails & 01 no on both flat iron at centre. Bending the flat iron to the shape required to fix tightly to GI pipe with stainless steel nuts, bolts and washers including necessary drilling into GI pipe and fitted in the top portion of flat iron. | 2,330 | Each | 144 ₹3,35,520 | 99 ₹2,30,670 | 60 ₹1,39,800 Lowest | 139 ₹3,23,870 |
| 1.03 | Removing existing U/S long rail of charpoy GI Pipe. S&F new long rail made out of 32 mm dia medium grade GI Pipe ISI marked confirming to IS-1239 threaded at both ends complete all as specified and shown on drg & directed by GE/Engr-In Charge. | 100 | Each | 244 ₹24,400 | 160 ₹16,000 Lowest | 820 ₹82,000 | 244 ₹24,400 |
| 1.04 | M&L to making Short Rail from old U/S long rail retrieved from charpoy GI pipe including threading at both ends and fixing the same to charpoy GI pipe complete all as specified and shown on drg & directed by GE/Engr-In Charge. | 200 | Each | 5 ₹1,000 Lowest | 129 ₹25,800 | 26 ₹5,200 | 10 ₹2,000 |
| 1.05 | M&L to making leg from old U/S short rail retrieved from charpoy GI pipe including threading at one end and welding 4mm MS plate of dia 36mm at other end. complete all as specified and shown on drg & directed by GE/Engr-In Charge. | 400 | Each | 5 ₹2,000 Lowest | 80 ₹32,000 | 26 ₹10,400 | 12 ₹4,800 |
| 1.06 | Removing existing U/S/short lengthed old legs from the charpoy by unscrewing, S & F new legs 32 mm dia medium grade GI Pipe ISI marked confirming to IS-1239 threading at one end and welding 4mm MS plate of dia 36mm at other end. complete all as specified and shown on drg & directed by GE/Engr-In Charge. | 400 | Each | 10 ₹4,000 Lowest | 75 ₹30,000 | 98 ₹39,200 | 12 ₹4,800 |
| 1.07 | Removing existing U/S Elbow of charpoy GI Pipe. S&F with new GI elbow three way 32 mm dia duly ISI marked complete all as specified and shown on drg & directed by GE/Engr-In Charge. | 300 | Each | 65 ₹19,500 | 19 ₹5,700 Lowest | 83 ₹24,900 | 74 ₹22,200 |
| 1.08 | Removing existing U/S Check Nuts of charpoy GI Pipe. S&F with new check nuts 32mm dia duly ISI marked of approved quality complete all as specified and shown on drg & directed by GE/Engr-In Charge. | 500 | Each | 5 ₹2,500 Lowest | 19 ₹9,500 | 18 ₹9,000 | 7 ₹3,500 |
| 1.09 | Removing existing U/S MS sheet toe and S/F new toe made from 4 mm thick MS sheet 36 mm dia be welded with running welding at the bottom of each legs & painted one coat with black paint as shown on drg & Directed by GE/EIC. | 2,500 | Each | 3 ₹7,500 Lowest | 5 ₹12,500 | 12 ₹30,000 | 9 ₹22,500 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
8 Jan 2026, 6:00 pmClosed
GE (West) Delhi Cantt-10.
GE (West) Delhi Cantt-10.
Repair and conversion of Charpoy GI pipe nylon newar converted into Charpoy GI Ply Top under GE (West) Delhi Cantt-10
2025_MES_745163_1
GE/DW/TOKEN/113 OF 25-26
Open Tender
Miscellaneous Works
Item Rate
180 days
delhi
Class D Category d(i)
9 documents required · 9 mandatory
₹500
GE (West) Delhi Cantt
₹98,000
Yes
5 Feb 2026
18 Dec 2025
10 Jan 2026
18 Dec 2025
8 Jan 2026
2 Jan 2026
Amount
CHARPOY GI PIPE WITH NYLON NEWAR: FD-220: S & F following components of Charpoy including dismantling taking out carefully & replace old components of Charpoy Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 2330
Removing of Old / unserviceable newar from existing Charpoy GI Pipe,Reassembling/ tightening of Charpoy frame and supply and fixing new 12mm thick plywood BWR grade, ISI marked conforming to IS-303 of size 6.5'x3' (6.5x3 feet). Half round teak wood beading of best and approved quality shall be provided to all round the plywood and shall be fixed with new headless nails and duly pasted with best quality dendrite adhesive. The half round beading so fixed shall be french polished with high gloss finish all as directed by the Engineer-in-Charge. (The contractor has to submit purchase voucher and a manufacturer certificate for plywood).
Provision of 02 Nos of 900mmx40mmx5mm MS flat iron stiffners of best quality duly grinded at all the edges and fixed with round headed stainless steel nut and bolts with washer of suitable size i.e. 62 to 65mm long, 6mm dia across the long rail at equal spacing. MS flat iron strip shall be painted with two coats of synthetic enamel black paint over a coat of red oxide primer. 10 Nos in total of round headed stainless steel nuts and bolts with washer of superior quality of suitable size as mentioned above shall be provided for fixing the plywood on the Charpoy GI Pipe alongwith the MS flat iron stiffners by drilling holes 02 Nos each in long rails, 02 nos each in short rails & 01 no on both flat iron at centre. Bending the flat iron to the shape required to fix tightly to GI pipe with stainless steel nuts, bolts and washers including necessary drilling into GI pipe and fitted in the top portion of flat iron.
Removing existing U/S long rail of charpoy GI Pipe. S&F new long rail made out of 32 mm dia medium grade GI Pipe ISI marked confirming to IS-1239 threaded at both ends complete all as specified and shown on drg & directed by GE/Engr-In Charge.
M&L to making Short Rail from old U/S long rail retrieved from charpoy GI pipe including threading at both ends and fixing the same to charpoy GI pipe complete all as specified and shown on drg & directed by GE/Engr-In Charge.
M&L to making leg from old U/S short rail retrieved from charpoy GI pipe including threading at one end and welding 4mm MS plate of dia 36mm at other end. complete all as specified and shown on drg & directed by GE/Engr-In Charge.
Removing existing U/S/short lengthed old legs from the charpoy by unscrewing, S & F new legs 32 mm dia medium grade GI Pipe ISI marked confirming to IS-1239 threading at one end and welding 4mm MS plate of dia 36mm at other end. complete all as specified and shown on drg & directed by GE/Engr-In Charge.
Removing existing U/S Elbow of charpoy GI Pipe. S&F with new GI elbow three way 32 mm dia duly ISI marked complete all as specified and shown on drg & directed by GE/Engr-In Charge.
Removing existing U/S Check Nuts of charpoy GI Pipe. S&F with new check nuts 32mm dia duly ISI marked of approved quality complete all as specified and shown on drg & directed by GE/Engr-In Charge.
Removing existing U/S MS sheet toe and S/F new toe made from 4 mm thick MS sheet 36 mm dia be welded with running welding at the bottom of each legs & painted one coat with black paint as shown on drg & Directed by GE/EIC.
Painting to whole GI Pipe surface of charepoy with one coat of synthetic enamel paint of silver colour after preparation of surfaces.
GI CHARPOY WITH PLYTOP 32/25 MM (FD-220) QUANTITY-800
Removing existing U/S Elbow of charpoy GI Pipe. S&F with new GI elbow three way 32 mm dia duly ISI marked complete all as specified and shown on drg & directed by GE/Engr-In Charge.
Removing existing U/S Check Nuts of charpoy GI Pipe. S&F with new check nuts 32mm dia duly ISI marked of approved quality complete all as specified and shown on drg & directed by GE/Engr-In Charge.
Removing existing U/S MS sheet toe and S/F new toe made from 4 mm thick MS sheet 36 mm dia be welded with running welding at the bottom of each legs & painted one coat with black paint as shown on drg & Directed by GE/EIC.
Painting to whole GI Pipe surface of charepoy with one coat of synthetic enamel paint of silver colour after preparation of surfaces.
Removing of Old / unserviceable plywood 12 mm existing Charpoy GI Pipe,Reassembling/ tightening of Charpoy frame and supply and fixing new 12mm thick plywood BWR grade, ISI marked conforming to IS-303 of size 6.5'x3' (6.5x3 feet). Half round teak wood beading of best and approved quality shall be provided to all round the plywood and shall be fixed with new headless nails and duly pasted with best quality dendrite adhesive. The half round beading so fixed shall be french polished with high gloss finish all as directed by the Engineer-in-Charge. (The contractor has to submit purchase voucher and a manufacturer certificate for plywood).
M/S Shri Balaji Enterprises (BID ID -3518116)
M/S SUNIL TRADERS (BID ID -3519165)
SMS Enterprises (BID ID -3517978)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
PS113.pdf
Tender Documents • 0.96 MB
BOQ_834390.xls
BOQ • 2.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .