Construction of One no. Additional Classroom at Govt Upper Primary School Sanagobindpur, Tangi

Earth work in Hard Soil in foundation including inItial lead and 1.5 m. initial lift including rough dressing etc including cost, conveyance, royalty,taxes of all materials, etc complete as per the direction of the Engineer-in-charge.

Sand filling in foundation and plinth with approved river sand well watered and rammed. including cost, conveyance, royalty, taxes of all materials, etc complete as per the direction of the Engineer-in-charge.

Plain Cement Concrete (1:3:6) using 40 mm size H.G. metal ( crusher broken ) well rammed including cost, conveyance, royalty, taxes of all materials, etc complete as per the direction of the Engineer-in-charge.

Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth per cum.

Brick work with Fly ash bricks (23cmx11cmx8cm) size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in supper structure per cum.

Rigid smooth centring for RCC works including false work and dismantling then after casting including floor cost of all materials complete in ground. (Foundation & Plinth)

Column & beam

Lintel band

Chajja

Roof Slab

Parapet Column FF

Cement Concrete M20 using 20 mm and down size C.B. chips for R.C.C. works including hoisting and laying, etc completed as per the direction of the Engineer-in-charge. (Foundation )

Plinth Band

Column & beam

Lintel band.

Chhaja

Parapet Column FF

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. (G.F))

Parapet Column FF

MS Panelled Door double leaved shutter with MS Frame. Over all size including frame:- 1980mm (H) x 1070mm (W) made out of the following materials conforming to relevant Indian Standard specification. Frame:-35x35x6mm MS angle, Shutter style:- Top & Bottom rail 25x25x3mm MS Angle. Door panel:- 1.0mm CR Sheet. Panel stiffener covering width of each leaf:- 19x5mm. MS Flat 3 nos. on each leaf. Hinges size:- 100mm 6nos. (3nos. On each side) bought out as per ISS Hold fast:- 35x35x6mm MS Angle 175mm length bifurcated at the tip 3 nos. on each side. Handle:- 19x5mm MS Flat fabricated 4nos. Aldrop 2 nos. bought out as per ISS. Tower bolt:- 2 nos. bought out as per ISS.

MS Panelled Window double leaved shutter with MS Frame & Grill. Over all size including frame:- 1220mm Height x 910mm Width made out of the following materials conforming to relevant Indian Standard specification. Frame:-35x35x6mm MS angle, Shutter style:- Top & Bottom rail 25x25x3mm MS Angle. Window panel:- 1.0mm CR Sheet. Panel stiffener covering width of each leaf:- 19x5mm. MS Flat 2 nos. on each leaf. Hinges size:- 100mm 4nos. (2nos. On each side) bought out as per ISS Hold fast:- 35x35x6mm MS Angle 100mm length bifurcated at the tip 2 nos. one each side. Handle:- 19x5mm MS Flat 2nos. fabricated (inside). Tower bolt:- 4 nos. bought out as per ISS. Horizontal Grills 12mm MS Round at 100mm spacing.

Labour for fitting and fixing of M.S. Gates as per approved design including cost of all materials complete. (DOOR & WINDOWS) ISS.

6 mm thick plaster with cement mortar (1:4) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

16 mm thick plaster with cement mortar (1:6) over stone/brick masonry including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Plain Cement Concrete (1:4:8) using 40 mm size H.G. metal ( crusher broken ) well rammed including cost, conveyance, royalty, taxes of all materials, etc complete as per the direction of the Engineer-in-charge.

Supplying, fitting and fixing vitrified tile(colour printed) in floor of size 600mmx600mm of approved make conforming to IS:13755 laid on 20mm thick cement motar 1:4 (1cement : 4sand) and filling joints with white cement of approved quality including cost of all materials, labour T & P etc. required for the work all complete as per direction of the Engineer-in-charge. (For new work only)

Supplying, fitting and fixing vitrified Industrial floor Tiles Primum Grade of size 300mmx300mm having thickness 8mm to10mm confiring to IS 4457 on 20mm thick. Cement mortar (1;4) filling joint with white cement of approved quality including cost of all materials,labour T&P etc. Complete as per direction of E.I.C.(For new work only)

Painting with enamel paint of approved quality and shade over surface with 2 coats over 1 coat of primer etc.

Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. c/c and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

Finishing surface of walls with Cement based wall putty of approved make and finished smooth and even surface to receive painting

Priming 1 coat with any appproved wall Primer including cost of Primer. (G.F)

Wall painting two coats with Plastic emulsion Paint of approved shade on new work to give an even shade including cost of Plastic emulsion Paint. .

Wall painting two coats with weather coat of approved shade on new work to give an even shade including cost of weather coat. (G.F)

Please Enable Macros to View BoQ information