Renovation of 2nd Sub Division Office Building Investigation and Planning WR Gorakhpur, Division Basti

E/W in excavation in foundation and Filling on required place including proper levelling Dressing with manual compaction and T&P etc.compaction with all respect .

E/W in Filling by power transport within 10 km including excavation ,Loading , Unloading ,stacking and manual compaction and dressing including all lead lift and compaction in all respect.

Supplying and laying of 15 cm thick 40 mm gauge Brick ballast as filter material on slop of earth for Interlocking .

Providing and Laying of factory made 80 mm thick rubber moulded Interlocking cement concrete tiles (30mpa) including 25 mm thick compact bed of fine sand including the cost of material, labour T&P etc.compacting and proper embedding /laying of Interlocking tiles levelling and dressing of surface to required level and slope,filling joint with fine sand required for proper completion of work as directed by Engineer in charge.

Dismentaling of Door including chaukhat with Holdfast and including stacking of materials as direction by engineer incharge within a distance of 60 meter.

Providing and Fixing pressed steel door & window frames confirming to IS 4351 . Manufactured from commercial mild steel sheet of 1.20mm thickness including hings jamb,lock jamb beadand if required angle threshold of mildsteel angle of section 50x25 mm or base tie of 1.0 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split end tail to each jamb including steel but hinges 2.5mm thick with mortor guards ,lock strike plate and soft absorvers as specified as and applying a coat of approved steel primer after pre treatment of the surface as directed by engineer in charge.

Supplying and Fixing of flush Door 40 mm thick ,commercial quallity confirming to I.S.2202 Part I(1983) including Fixing of wooden cleats and stoppers and including fixing and adjustment of hings .bolts locks,handles springs fitting with necessary screws to be supplied departmentally.

Painting two coat over priming coat ( but excluding cost of priming coat)on steel/new wood surface and other metal surface including cleaning the surface of all dirt ,dust and other foreign matter sand papering and stoping including cost of material ,labour ,T&P,etc.as requiered for completion of work paint shall be used as per standard IS specification.

Providing and fixing1.0mm M.S.thick sheet sliding shutter with frame & diagonal braces of 40x40x6.0mm angle Iron 3.0 mm M.S. gusset plateat the Junction and corner 25mm dia pully 40x40x6 mm angle T Iron guide at the top and bottom respectivltly including applying a priming coat of approved steel primer

Supplying & fixing galvanized mosquito havy quality iron wire gauge of expanded metal havy quality our windows and including C.P. teak wood battens 3.0x10.0 cmoper completion with servers and including supply of all in material ,labour and T&P etc.requird for comlpetion of work

Dismentling R.C.C.of old damaged existing of roof for treatment of roof top including ,stacking of dismentled materials within 60 meter as per directionof Engineer in charge complete in all respect.

Laying R.C.C. 1:1.5:3 for treatment of roof top with 20 mm to 40 mm size Dalla grit and Kanahar sand not less than 2.2 F.M. including cost of all material labour and T&P etc. required for proper completion of work.

First class brick work in 1:4 cement and chopan sand mortar including cost of all material labour,scafolding and T&P etc. required for proper completion of work.

Dismentling cement concrete or tiles or granolithic floor including base concrete and including stacking of dismenteled materialswith in 60M Distance for tiled floor.

Dismentling cement concrete or Brick wall tiles or granolithic floor including base concrete and including stacking of dismenteled materials with in 60M Distance for wall.

S/F 6 mm thick chinaWhite glazed tiles in flooring or skirting dado laid with 1:3 cement and approved c.sand mortor working and the joints finishing with white cement slurry jointing and polishing complete including supply of all materials and wastes , labour T&P etc.required to comlpetion of the work.

S/F 6 mm thick china white glazed tiles in wall laid with 1:3 cement and approvedc.sand mortor finished white cement slurry joint ing and polishing complete including all materials labour T&P etc.required to complesupply of tion of the work.

Dismentling Existing Plaster including disposal of refuse with in distance of 60 meter

Cement plaster in 1:4 Brick masonary sand mortar including cost of all material, labour, scafolding and T&P etc. required for proper completion of work.

Distempering two coat of oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an including a priming coat cement primer of aprrved brand and manufacturer such as berger ,J&N,shalimar ,asian paints after thoroughly brushing the surface free from mortor dropping and other foreign matters and also including prepairing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials .

Providing and applying plaster of paris putty.of roof of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Cutting ,Bending Binding ,and Placing in position of steel reinforcement including cost of all materials ,Labour T&P etc. requiored for proper completion of work.

Centering and shuttering for P.C.C./R.C.C.in founation and porcupine including cost of shuttering R.C.C above GL

Centering and shuttering for P.C.C./R.C.C.in founation and porcupine including cost of shuttering P.C.C on Ground

Laying P.C.C 1:2:4 Under foundation in column,Drain and Chamber with 12.5mm to 20mm size ahiraura stone ballast and kanhar sand not less than 2.2 F.M.including cost of all materials Labour ,and T&P etc.required for proper completion of work .

Providing & Placing on terrace (at all floor level ) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fitting and the base support for tank

Providing and engauging beldar for jungle clearance in campus of II sub division office building.

Sand blanketting 40 mm thick by local sand under CC and Interlocking including cost of all materials,Labours,T&P etc.

S/L of Wire mesh / Murga Jali for repairing of Roof I/c Cost of all materials ,labour, t&P etc. (S.O.R.P.W.D.P-5,13(iii)

Supplying and fixing rolling shutters of approved make of 80x125 mm gauge cold rolled m.s lath interlocked through out their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets side guides and arrangement for in side and out side locking with push and pull operation complete but excluding the cost of top cover and spring.

Providing and fixing ball bearing for rolling shutters

Providing and fixing 27.50 Cm long wire spring grade no 2 for rolling shutters

Providing and fixing top cover of rolling shutter of 18 gauge

Dismantling of girder,trusses,and other steel work including stacking of dismantled materlais as directed by engineer -in charge within a distance of 60 metre.

P/F in position collapsible steel shutter with vertical channel 20 x10 with top and bottom rails of T - iron 40 x40 x6 mm with 40 mm dia steel pulley with bolts , nuts, locking arrangements, stoppers,handles complete I/ c applying priming coat of approved red led paints.

Providing and Injecting chemical emulsion for pre construction antitermite treat ment and creating and chemical barrier under and around the column pits wall trenche will be used the rate of application of chemical emulsion shall be as fallowsconcentrate of any other approved material such as hepthachlor or chlordancebasement excavation top surface if plinth filling junction of wall and floor along the external per meter of binding expention joint of sorrounding of pipe and condute etc.complete (plinth area of the building of the ground floor only shall be measured as per IS 6313(part II 1981)aldrin emulsificavle III. Treatment of top surface of plinth filling 5.0 ltr per sqm.

PLUMBING AND SANITARY WORKS : - P/F Indian type white glazed earthen wire 1" Quality ISI marked WC pan size 580 x440 mm indian make of approved quality including cost of all material

P/F 100 mm size 'P' or 'S' Trap for water closet squating pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1 cement : 1 fine sand)

P /F 10 lit.low level flushing sistern (white vitreo us china clay) of standard approved make complete with all accessories and fitting .

P/F in position C.P.brass towel rail complete with brackets including making chases in wall and repairing the same in 1:3 C.M.complete 600cmx 20cm size

Fixing C.P brass soap dish with C.P.brass brackets fixed to wooden plugh plastic sleeves with C.P brass screws

P/F C.P. jali for nahani trap 100 mm dia including cost of all materials

P/F C.P. brass waste pipe for wash basin in 32 mm dia complete ,cost of all materials ,labour T&P etc.

P/F crome platted copper pipe conection for wash basin cistern gyeser etc.with two no.C.P.nut. 450 mm long.

P/F wash basin with single hole /number of holes for pillar tap with C.I.or M.S.brackets painted white including cutting hole and making good the same but excluding fitting 630x450 cm.

P/F concealed galvalized mild steel tube (medium grade ) I.S: 1239 (part 1)1979 complete with fitting and clamps including cutting and making goods the walls etc. complete( internal works ) 20mm dia.

Providing & fixing 15/20 mm nominal hole size C P brass tap or bib cock.

Providing & fixing 15 mm nominal hole size C P brass pillar cocks or normal cocks/tap.

Providing & fixing C.P brass angle valve for cistern wash basin gyeser etc 15 mm nominal hole size including cost of all materials ,labours, T & P etc.

Providing & fixing in position ferrule or socket for services, IS 2629 - 1978, with G I mouth cover including boring, taping the main etc . complete 15 to 20 mm dia.

Providing & fixing chromium plated shower rose with 15 mm as 20 mm inlet complete and 100 mm dia.

Providing & fixing G I 'T' with 20 mm inlet complete and 15 mm dia.

Providing & fixing G I elbow of 20 mm dia.

ELECTRICALS WORKS :- Wiring for light point/exhaust fan point/ call bell point with 1.5 sq mm FRLS P.V.C.insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switches, modular plate,suitable GI bos and earthing the point with 1.5 sq mm FRLS P.V.C.insulated copper conductor single core cable etc. as required.

Supplying and fixing of 20 mm size of medium class PVC conduit along with acessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

S/F of following size/modules,GI box along with modular base and cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mm x 75 mm)

S/F of following size/modules,GI box along with modular base and cover plate for modular switches in recess etc. as required. 3 Module (100 mm x 75 mm)

S/F of following size/modules,GI box along with modular base and cover plate for modular switches in recess etc. as required. 4 Module (125 mm x 75 mm)

S/F of following size/modules,GI box along with modular base and cover plate for modular switches in recess etc. as required. 6 Module (125 mm x 75 mm)

S/F of following size/modules,GI box along with modular base and cover plate for modular switches in recess etc. as required. 8 Module (125 mm x 125 mm)

S/F of following size Moduler base and cover plate on existing modular metal boxes etc. as required. 1 or 2 Module (75 mm x 75 mm)

S/F of following size Moduler base and cover plate on existing modular metal boxes etc. as required. 3 Module (100 mm x 75 mm)

S/F of following size Moduler base and cover plate on existing modular metal boxes etc. as required. 4 Module (125 mm x 75 mm)

S/F of following size Moduler base and cover plate on existing modular metal boxes etc. as required. 6 Module (125 mm x 75 mm)

S/F of following size Moduler base and cover plate on existing modular metal boxes etc. as required. 8 Module (125 mm x 125 mm)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.

Wiring for circuit/submain wiring alonwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. (i) 2 x 2.5 Sq.mm+1 x 2.5 Sq.mm earth wire, (for submain wiring)

Wiring for circuit/submain wiring alonwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. (ii) 2 x 4 Sq.mm+1 x 4 Sq.mm earth wire, (for power wiring / A.C wiring)

Supplying and fixing following modular switches/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 A switch

Supplying and fixing following modular switches/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 2 Way 5/6 A switch

Supplying and fixing following modular switches/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A switch

Supplying and fixing following modular switches/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 Pin 5/6 A Socket outlet

Supplying and fixing following modular switches/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6 Pin 15/16 A Socket outlet

Installation and testing and commissioning of ceiling fan I/c wiring the down rod of standard length (up to 30 cm) with 1.50 Sqm FRLS PVC insulated copper conductor, single core cable I/c P/F phenolic laminated sheet cover on the fan box etc as required.

Installation and testing and commissioning of pre wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all acessories and tube/lamp etc. I/c S/L and fixing ball and socket arrangement, 2 nos down rods of 20 mm dia x 1.60 mm thick steel conduit up to 30 cm length, painting and wiring the down rod and connectionss with 1.50 mm sqm FRLS PVC insulated copper conductor, single core cable and earthing etc. as required.

S/F suitable size GI box with modular plate and cover in front on surface or in recess I/c P/F 25 amp modular socket outlet and 25 Amp modular SPMCB "C" curve I/c connectios ,painting etc. as required.

S/F following way single pole and neutral sheet , steel, MCB distribution board 240 V on surface /recess complete with tinned copper bus bar, nutral bus bar, earth bar, Din bar interconnections powder painted I/c earthing etc. as requd. But without MCB/ RCCB / ISOLATOR

S/F 5 Amp to 32 Amp rating, 240 /415 V, 10 KA "C" MCB suitable for inductive load of following pole in the existing MCB DB complete with connection , testing and commmissioning etc. as required.

S/F rating, Double Pole, 240 V, Isolator in the existing MCB DB complete with connection , testing and commmissioning etc. as required.

S/I/T/C of 1200 mm Sweep bEE 5 Star rated ceiling fan with BLDC motor class of insulation B, 3 Nos blade , 25 Cm long down rod , 2 nos Canopies, Shackle kit, safety rope, copper winding, power factor not less than 0.90 service value (CM/M/W) minimum 6.0 Air delivery, minimum 210 cumec per minutes , 350 rpm( tolrence as per IS 374-2019) THD less than 10 % remote or electronic regulator unit for speed control and all remaining acessories I/C safety pin , nut bolts, washers, copressor rise = 75 degree Celcius (max) insulation resistance more than 2 Mega ohm, suitable for 230 V, 50 Hz, Single Phase AC supply,earthing etc complete as required.

S/F of 1.50 ton AC including Cost of all materials ,labour, T& P etc.as per Quotation.

S/F of 1700 VA Inverter including Cost of 12 V Battery-2 nos,150 amp with stand or tray ,labour, T& P etc.as per Quotation.

RAIN WATER HARVESTING Excavation in foundation in ordinary soil I/c lift up to 1.50 mtr and lead 30 mtr all com work.

Cement Concrete with 40 mm gauge stone ballast, C/sand and with cement in proportion of 1:4:8

First class brick work in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

15mm cement plaster in 1:4 Brick masonary sand mortor including cost of all materials labour and T&P etc.required for proper completion of work

Laying R.C.C. 1:1.5:3 for cover of recharge pit with 12.50 mm to 20 mm size Dalla grit and morang sand not less than 2.0 F.M. including cost of all material labour and T&P etc. required for proper completion of work.

Cutting ,Bending Binding ,and Placing in position of steel reinforcement including cost of all materials labour T&P etc. requiored for proper completion of work.

Supplying and laying of 50 cm thick 40 mm gauge brick ballast as filter material in recharge pit.

Supply & laying of 12.50 mm to 20 mm size Dalla grit.as filter material in recharge pit.

Supply of & laying of coarse sand as filter material in recharge pit.

Supply of nylon mesh cloth as per market rate.

Supply of 110 mm dia PVC pipe

Supply of 110 mm PVC Strainer Pipe.

Boring with150 mm dia casing pipe including lowering and extraction of assembly ,loading,unloading and carriage,set boring works 0.00 to 20.00 mtr

Supply of 160 mm PVC Pipe for drain purpose.

Filling of filter Materials in Recharge Pit

Labour Charge for Fitting of PVC pipe and Iron clamps .

Supply of PVC Bend of 100 mm dia

Supply of PVC socket of 100 mm dia

Supply of PVC Jointing Solution Tube

FOR OPEN DRAIN : - E/W in excavation in foundation and Filling on required place including proper levelling Dressing with manual compaction and T&P etc.compaction with all respect .

First class brick work in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

Supplying and laying of 15 cm thick 40 mm gauge brick ballast as filter material on slope of earth for C.C.Interlocking & C.C.

Laying P.C.C 1:2:4 / C.C 1:2:4 Under foundation in ,Drain,column and Chamber and floor with 12.5mm to 20mm size ahiraura stone ballast and morang sand not less than 2.0 F.M.including cost of all materials Labour ,and T&P etc.required for proper completion of work .

Centering and shuttering for P.C.C./R.C.C.in foundation and porcupine including cost of shuttering .

Cement plaster in 1:4 Brick masonary sand mortor including cost of all materials labour and T&P etc.required for proper completion of work.

TRACK WAY/FOOTHPATH Laying P.C.C 1:2:4 / C.C 1:2:4 Under foundation in ,Drain,column and Chamber and floor with 12.5mm to 20mm size ahiraura stone ballast and morang sand not less than 2.0 F.M.including cost of all materials Labour ,and T&P etc.required for proper completion of work .

Sand blanketting 40 mm thick by local sand under CC and Interlocking including cost of all materials,Labours,T&P etc.

Supplying and laying of 15 cm thick 40 mm gauge brick ballast as filter material on slope of earth for C.C.Interlocking & C.C.

BOUNDARY WALL E/W in excavation in foundation and Filling on required place including proper levelling Dressing with manual compaction and T&P etc.compaction with all respect.

Supplying and laying of 15 cm thick 40 mm gauge brick ballast as filter material on slope of earth for C.C.Interlocking & C.C.

Sand blanketting 40 mm thick by local sand under CC and Interlocking including cost of all materials,Labours,T&P etc.

Laying P.C.C 1:2:4 / C.C 1:2:4 Under foundation in ,Drain,column and Chamber and floor with 12.5mm to 20mm size ahiraura stone ballast and morang sand not less than 2.0 F.M.including cost of all materials Labour ,and T&P etc.required for proper completion of work .

First class brick work in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

Cement plaster in 1:4 Brick masonary sandmortor including cost of all materials labour and T&P etc.required for proper completion of work.

FABRICATION AND IRRECTION OF IRON GATE Fabrication and irrection of Iron Gate Size 4.20 x 2.10 mtr as per Quotation rate.including Cost of all materials ,labour, T&P etc.