Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.5 LAccepted-AOC 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹72.1 L+₹2.4 L (3.49%)Rejected-Finance | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹73.6 L+₹3.9 L (5.65%)Rejected-Finance 06 SACHIN SANTOSH DALVI G T HOSPITA CSMT MUMBAI MAHARASHTRA 400001 UDYAM MH 19 0135994 27ALQPD7257B1Z2 R M | MUMBAI | MAHARASHTRA | 400001 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹73.8 L+₹4.1 L (5.90%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹78.1 L+₹8.5 L (12.2%)Rejected-Finance ROOM NO 214 GANESH MURTHY NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than being lowest |
Tender Value
₹95 L
EMD Value
₹1.7 L
Closing Date
9 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR/MAINT OF MARINE INSTALLATION AT VARIOUS JETYY AT NAVAL DOCKYARD, MUMBAI UNDER GE (NW) KUNJALI, COLABA, MUMBAI
2024_MES_672561_1
8392/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Class C
Category a(i)
7 documents required · 7 mandatory
₹1,000
GE (NW) Kunjali
₹1.7 L
Yes
17 Dec 2024
6 Sept 2024
11 Oct 2024
6 Sept 2024
9 Oct 2024
27 Sept 2024
6 Sept 2024 - 26 Sept 2024
Amount
Dismantling plain or corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof coverings all as specified and directed.
Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, round/ nainital pattern or similar pattern, fixed with self tapping screws as specified
Ditto all as per item No. 2.00 above but plain galvalume sheets for ridges/ Flashings.
Material & Labour for 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.
Disconnecting existing water tanks, any capacity of tank setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete exc 1000 ltrs and n exc 2000 ltrs all as directed by Engr in Charge.
Dismantling floor hearth or wall tiling, concrete tiles including cement mortar bedding and any type of roof treatment, except plain cement concrete and rubbish off the premises.
Demolition of plain cement concrete/brick bat of any description and in any position not other wise specifically provided , in roof etc upto height of roof 25 mtr all as specified and directed by EIC incl removing the debris outside MoD land. Note: (i) Concrete shall be removed from roof through lift, no concrete shall be thrown from the roof, all payment included in the rate. (ii) The place of disposal shall be found out by the contractor
Material & Labour for brushing neat cement slurry with 3.0 kg of cement per Sqm on cleaned and washed concrete surfaces and like all as directed by Engineer-in-charge.
Material & Labour for PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope with 3% water proofing compound in weight of cement complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately).
Material & Labour for providing water proofing treatment with five layered 4mm thick APP (Atactic Polypropylene) modified bituminous membrane re-inforced with non woven polyester mat of weight not less than 180 gms/Sqm as centre core and with multiple layers of polyethene finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane providing a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric (An overlap of 100mm at end & 75mm shall be provided on sides ends respectively) etc all as specified and directed by EIC. The membrane shall be inserted in the wall at the height of 800 mm by cutting groove in the wall finished by membrane flashing.
Material & Labour for rendering 20mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total weight of cement in concrete complete all as specified and as directed. Note : WPC will be measured separately.
Supply only integral water proofing compound.
Material & Labour for cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3.
Material & Labour for laying chicken wiremesh of galvanised steel 0.7 mm dia of wire having mesh size 25 x 25 fixing by using battens of approved makes complete all as specified & as directed by EIC.
Erection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary bracing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth for carring out external facework of walls complete all as specified and as directed. Note:- The scaffolding is to be incorporated to execute the works for Sl item No 27.00, 28.00 & 29.00
Erection & dismantling of heavy duty nylon net for protecting of debris/roof tiles any type of construction material from the roof of height upto 20 mtr all as directed by EIC. Note:- The scaffolding is to be incorporated to execute the works for Sl item No 27.00, 28.00 & 29.00
Supply & Fixing in repairs polyethylene water storage rotational moulded, 2000 Ltrs Capacity, hoisted and fixed in position with connecting nipple, top cover etc. complete
Supply & Fixing in repairs 1000 Litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as directed by Engineer in charge.
Demolition of reinforced concrete in shelves slabs n.exc 15 cm thickness any description and in any position incl removing the debris outside MoD land. Note: (i) The place of disposal shall be found out by the contractor
Material & Labour for RCC Type B1 1:2:4 using 20 mm graded stone aggregate slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as directed.
Material & Labour for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed by the Engr-in- charge
Ditto all as per item No. 21.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Taking down cement plaster raking out joints hacking for key scrubbing down with water etc complete incl removing the debris outside MoD land. Note: (i) The place of disposal shall be found out by the contractor
Material & Labour for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) with water proofing compound at the rate of 3% by weight of cement and finishing the surface even and fair. (WPC will be measured and paid separately).
Material & Labour for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth with and including 1 mm thick sagol finish complete all complete all as specified and directed.
Material & Labour for rendering 5mm thick in CM 1:3 on ceiling surface including all safety and scaffolding complete all as specified and directed
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturating the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 30mm thick polymer plaster (1:5:15, polymer,cement, Quartz sand) and finally finishing the surface all as specified and directed incl removing the debris outside MoD land. Note: (i) The place of disposal shall be found out by the contractor (ii) New reinforcement and MS Sections will be measured and paid separately
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturating the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and jacketing around column/beam/other RCC members with Microconcrete including all lifts, shuttering , drilling holes and fixing shear anchor / deficient reinforcement as per manufacturing specification and including scaffolding upto any height complete all as specified and directed Note: (i) The place of disposal shall be found out by the contractor (ii) New reinforcement and MS Sections will be measured and paid separately
Material & Labour for injecting of site mixed cement slurry grout, mixed in specified proportion containing cement ,sand, water with addition of plasticizers (approved make) & migratory corrosion inhibitor, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating slurry mixed to a lump free fresh creamy consistency, mixing shall be done by mixer continuously stiring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating and including scaffolding upto any height complete filliing of grout in the holes drilled complete all as specified and directed by Engr-in- charge.
Material & labour for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples, weight n exc 4 Kg per Sqm, supplied and fixed complete to wood or steel members.
Material & Labour for preparation of newly plastered wall surfaces over 10cm girth applying two coats of 100% acrylic weather resistant emulsion over a coat of exterior wall primer complete.
Material & Labour for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting on plastered surfaces including preparatory to distempering.
Material & Labour for preparation of new plastered surface of ceiling and applying two coat of oil bound distemper on ceiling with alkali resistant primer complete all as specified and directed
Dismantling false ceiling/boarding/partition wall any description fixed in any position with nails.
Supply & Fixing Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.
Material & Labour for Sheet glass 4 mm thick, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane
Material & Labour for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications.
Material & Labour for 12 mm thick pre-laminated Medium Density board,with both sides decorative lamination interior grade, fixed in aluminium/ wooden frame work.
Supply & Fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11
Supply & Fixing Aluminium anodised sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .
Supply & Fixing aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.
Supply & Fixing Extruded aluminium anodised alloy handles, fabricated type 200mm size.
Material & Labour for false ceiling cement fibre sheet made out of 600x600x 4 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/cleats/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
Material & Labour for Mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by EIC.
Material & Labour for Mild steel rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.
Material & Labour for preparing New or previously untreated steel surface of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide. All as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed
Ditto all as per item No. 48.00 above as per Item above but n.exc 1.5 sqm complete all as specified and as directed
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc
Material & Labour for Brick work work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6
Material & Labour for PCC 75mm thick D-2 type (1:4:8), using (40 mm graded aggregate) as in sub base all as specified and directed..
Material & Labour for Hard wear stone 18-20mm thick (of any type) granite stone slab machine cut in floor/skirting/dado/cill laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.
Material & Labour for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of tile complete all as specified and directed.
Supply & Fixing 3 mm thick aluminium composite panel plain of approved colour shade as required cutting, notching bending to shape and jointing including aluminium tubular section as required of size 25 x 25 x 1.4mm thick etc. as in vertical/flat surface of wall, roof including making holes for light fixing etc complete
Material & Labour for applying a coat of bituminous primer conforming to IS-3384 @ 1.20 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. Providing and laying double layered 2 mm thick APP (Atatic poly propylene) modified polyester reinforced water proofing membrane with minimum weight of 3.60 Kg/Sqm as specified and directed.
Material & Labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
Material & Labour for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15 mm thick screed bed in CM 1:4 complete all as specified.
Material & Labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified.
Supply & Fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified.
Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.
Supply & Fixing 75 mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.
Taking down 15 mm bore, GI tubing and connections including cleaning for refixing or removal to store.
Ditto all as per item No. 64.00 above above but 20 mm bore GI Pipe.
Supply & Fixing 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.
Ditto all as per item No. 66.00 above above but 20mm dia medium GI Pipe
Supply & Fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed
Supply & Fixing for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed
Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required, including all connecting fitting complete all as specified and as directed.
Material & Labour for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed.
Material & Labour 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed.
Supply & Fixing 75 mm CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes
Supply & Fixing 100mm CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes
Supply & Fixing in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
Supply & Fixing in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
Supply & Fixing of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed as fixed in repairs.
Supply & Fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.
Supply & Fixing fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.
Supply & Fixing vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.
Supply & Fixing in repairs vitreous china wash down water closet pan (EWC), white (excluding flushing cistern and flush pipe) including seat cover, black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Supply & Fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle including brackets complete all as specified and directed.
Supply & Fixing brass Chromium Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.
Supply & Fixing toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed.
Supply & Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.
Supply & Fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.
Supply & Fixing Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.
Supply & Fixing fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as fixed in repairs complete all as specified and directed.
Supply & Fixing in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to 15 mm bore pipe etc complete all as specified and directed.
Rubbing/cleaning/Polishing of Kota stone/terazzo tiles/granite with mechanical instrument and applying one coat of polish all as specified and directed by EIC
Supply & Fixing in repairs 2 mm thick coloured electrical insulation rubber sheet as per IS-15652-2006 class A all as specified and directed by EIC.
Supply & Fixing in repairs PVC wall paneling 3 to 5 mm thick any colour fixed with wall, beading for leveling of wall, all as specified and directed by EIC.
Supply & Fixing in repairs solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed by EIC.
Supply & Fixing in repair 5mm thick PVC fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification.
Supply & Fixing factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 750 Kg/Cum and screw withdrawl strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/Sqcm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of Engineer in Charge.
Supply & Fixing factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawl strength of 1800 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer -in-Charge.
Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed
Supply & Fixing in repair PVC insulation rubber mat 2mm thick any coloured fixed over floor/steel/concrete as per manufacturer instruction all as specified and directed by EIC
Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.
Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in riser of steps, landing, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.
Material & Labour for preparation of old decorated surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (oil emulsion) on walls complete.
Material & Labour for preparation of old decorated surfaces of ceilings / boards by washing, rubbing down and stopping and applying one coat of oil bound distemper (oil emulsion) on ceilings complete.
Material & Labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete.
Material & Labour for preparation of old painted steel surfaces of any description not otherwise over 10 cm in width or girth and applying one coat of synthetic enamel paint complete.
Material & Labour for preparation of surfaces of walls, chajjas, parapets of an old surfaces etc. and applying one coat of acrylic exterior paint up to 8 storeys buildings complete including necessary scaffolding.
Material & Labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigmentover 50mm thick sand cushioning all as specified and as directed by EIC.
Supply & fixing Toughned glass 10mm thick, as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required.
Supply & Fixing 4mm thick backelite with decorative choice laminated on both side completion as specified and as directed
Material & Labour for preparation of RCC/PCC roof structure an evenly a coat of cold bituminous at 1 Kg per Sqm and applying seating cloth over cold bituminous , finally paving bitumen of any penetration at 1.8 Kg per Sqm all as specified and as directed.
jalandhara construction (BID ID -3133513)
Sachin santosh dalvi (BID ID -3118554)
RAJENDRA CONSTRUCTION (BID ID -3123377)
Pragathi Infrastructure Co. (BID ID -3125592)
M/s. MAYUR ENTERPRISES (BID ID -3125299)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .