Providing and installing Modular laboratory furniture at Rajiv Gandhi hospital Gangyal Jammu.

Amount

C/D-FRAME SYSTEM All C/D-Frames assemblies should be manufactured from standard hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. Thesuspendedunder-benchweldedunitsshouldbesupportedonheavy-dutysteelframesfully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. C/D-Frame should be constructed from a rectangular pipe with a cross section of 30mm x 30mm / 60mm x 30mm and should be a minimum 1.6 mm/2.0 mm thick. The C/D-Frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. Drainage gradient should be well adjusted throughout the lengthoftableandshouldhavehorizontalsupportsfordrainagesystems.TheCornerUnitsshall fit well with 770mm & 920mm table depths. All frame-work is should be pre-treated with superior pure epoxy powder coatedfinish. The C/D-Frames should be for suspended storage cabinets HORIZONTAL MEMBERS These should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 30mm x 30mm / 60mm x 30mm with a minimum of 1.6 mm thick. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C/D- Frames together as shown using C-clamps/U-clamps. Together with the C/D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent C/D-Frames. They should be available in various widths of 600, 900, 1200, 1350, 1500 mm

Storage Boxes Supply & Fixing of Storage Boxes of Measurements, 1 Drawer & 2 Shutters of Size L-750 mm x D-530 mm x H-635 mm CompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware istobeofSS-304Boltingsystems.Handlesshouldbe“D”typemadeupofSS-304,8mmthick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Storage Boxes Supply & Fixing of Storage Boxes of Measurements, 1 Drawer & 2 Shutters of Size L-600 mm x D-530 mm x H-635 mm CompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware is to be of SS-304 Bolting systems. Handles should be “D” type made up of SS-304, 8 mm thick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Sink Storage Boxes Supply & Fixing of Storage Boxes of Measurements, 2 Shutters fitted with Sink, made up of 5 mm thick high density and elastic polypropylene with bowl size (L x W x D) is 560 x 340 x 295mm. Each sink to be provided with a bottle trap & hose pipe. A 3-way Tap to be be provided with the Sink Unit, which should have 2 fixed Bib Cocks & One Swan Neck Swivel Cock made in Brass and heavy duty knobs. 360' Swing Goose Neck Spout with Brass Head Work. of Size L-750 mm x D-530 mm x H-635 mm CompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware istobeofSS-304Boltingsystems.Handlesshouldbe“D”typemadeupofSS-304,8mmthick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Corner Sink Storage Supply & Fixing of Sink Storage Boxes of same as above measurements, fitted with Sink, made up of 5 mm thick high density and elastic polypropylene with bowl size (L x W x D) is 560 x 340 x 295mm. Each sink to be provided with a bottle trap & hose pipe. A 3-way Tap to be be provided with the Sink Unit, which should have 2 fixed Bib Cocks & One Swan Neck Swivel Cock made in Brass and heavy duty knobs. 360' Swing Goose Neck Spout with Brass Head Work. of Size L-850 + 850 mm x D-530 mm x H-635 mm CompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware istobeofSS-304 Bolting systems. Handles should be “D” type made upof SS-304,8mmthick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Reagent Shelf Supply & Fixing of Reagent Shelf of Size L-1500 x D-300 x H-650mm CompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware istobeofSS-304 Bolting systems. Handles should be “D” type made up of SS-304,8mmthick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Reagent Shelf Supply & Fixing of Reagent Shelf of Size L-1200 x D-300 x H-650mm CompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware istobeofSS-304Boltingsystems. Handles should be “D” type made upofSS-304,8mmthick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Reagent Shelf Supply & Fixing of Reagent Shelf of Size L-750 x D-300 x H-650mm CompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware istobeofSS-304 Bolting systems. Handles should be “D” type made upofSS-304,8mmthick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Knee Space Supply and fixing of Knee Space having one Footrest made up of 1mm thick sheet (25x50x25mm'C'ChanneltypeandopenableBackCoverPanelof0.8mmthicknesswithlength:(a) L-750 mmCompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications

Knee Space Supply and fixing of Knee Space having one Footrest made up of 1mm thick sheet (25x50x25mm'C'ChanneltypeandopenableBackCoverPanelof0.8mmthicknesswithlength:(a) L-600 mmCompletewithSEFA-10Compliant‘C’/'D'FrameSystemhaving"C'Legs&ConnectingSetsasper Technical Specifications

End Cover Panels Providing and fixing of all side cover panels and back panels, filler panels to be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. Size : 185mm x835mm with 15mm bend on all sides.

Electrical Trunking Electrical Trunking, Max L-2002M, as per specifications

Switch The set of 5A-1no.and 15A-1 no. and sockets with face plate procured from NORISYS / LEGRAND / ROMA / ANCHOR GREATHWHITE or equivalent to be placed on the face of the Regent rack, without wiring

Worktop Providing and Fixing of the worktops of size 18mm± 2 mm Jet(Z)-black Granite of an even surface. The exposed edges of the granite to be chamfered and smoothened with underneath Neoprene packing of size 6 mm x 30 mm so as to have dampening effect and better absorption of vibration.

Citizen Industries

GD Lab Solutions Private Limited