Design, manufacturing, supply, replacement, installation, erection, commissioning and trial run of pump transformers and E.O.T. crane along with renovation/electrification of pump buildings and construction of store rooms for pumping stations of Kanw

S I T C of Vertical wet well type pump complete with Bowl assembely,column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing,pressure gauges, Bearing temperature gauge, sole plate conforming to IS:1710 & min. efficiency not less than 87% at Rated discharge and StaticHead complete with all accessories as per specification & approved make,carrying of third party inspection, transporation up to site, loading,unloading, erection, commissioning, Testing , Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSR2.81 cumec/100 cusec (17 to 20 meter)

SITC of Complete Discharge bowl assembly conforming to IS: 1710 &min. efficiency not less than 87% having Rated discharge capacity andtotal static head complete with all accessories as per specification &approved make , including work of dismantaling of existing pump ,providing and replacement of Top shaft, intermediate shaft, various shaftsleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys,High tensile Nut bolts for complete pump, and carrying of third partyinspection, transporation up to site, loading, unloading, erection,commissioning Testing ,Three month trial run & one year defect liability.For Additional technical 100 CS (17 to 20 meter)

S I T C of Vertical wet well type pump complete with Bowl assembly, column pipe, delivery Tee, motor stool, shafts, bearings, bearing housing, pressure gauges, Bearing temperature gauge, sole plate conforming to IS: 1710 & min. efficiency not less than 87% at Rated discharge and Static Head complete with all accessories as per specification & approved make, carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning, Testing , Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSR For static head 17 meter to 20 meter Design discharge 2.12/2.15 cumec

SITC of Complete Discharge bowl assembly conforming to IS: 1710 & min. efficiency not less than 87% having Rated discharge capacity and total static head complete with all accessories as per specification & approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, and carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSR For static head 17 meter to 20 meter Design discharge 2.12/2.15 cumec

S I T C of Copper wound Power Transformer conforming to IS: 2026 with latest amendments & Losses as per ISI of rating 33/3.3 KV ONAN type, Delta-Star Connected, Vector Group Dyn 11, 50 Hz frequency, standard accessories like conservator, silica gel breather, radiator, fins, HT bushing & LT cable boxes, Off/On -LTC (+/- 7.5% in steps of 2.5%) winding/oil temperature rise of 50/55 C, ISI marked drain valve, Dial type Temperature gauge, first fill of oil, Epoxy based paint, including carrying of third party inspection, erection, Testing, commissioning , trial run & one year defect liability.(7500 KVA)

Providing and fixing of Gland packing Box for VT pump complete with all accessories like Grease cup with NRV, packing pieces, gland bush (Gun metal) ,Gland Box cap (gun metal) , water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fitting of new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump. 2.12 /2.81 cumec (75/100 cusec) pump of static head 17 to 20 meter

Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. (Excluding Bearings) 2.12/2.81 cumec (75/100 cusec) pump of static head 17 to 20 meter