Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.5 L
Closing Date
15 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTRICAL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turn over of turnover of V/N or "V" whichever less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual tum over shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar costing not less than the amount equal to 60% of advertised value of the tender Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of Work: Works involving supply testing installation testing and commissioning of outdoor/indoor substation equipements of 11KV or above voltage.
46 conditions · 12 needing a document upload
PAYMENT OF BID SECURITY (EMD) : The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond (BG) from a scheduled commercial bank of India or as mentioned in tender document. The BG shall be valid for a period of 90 days beyond the bid validity period. The BG for the value of Bid Security mentioned in tender document, shall be drawn in favour of "Senior Divisional Finance Manager, DRM office, Southern Railway, Tiruchchirappalli", on account of the contractor and the original Bank Guarantee should be delivered in person to "The Senior Divisional Electrical Engineer (Traction Distribution branch), DRM office, Southern Railway, Tiruchchirappalli", before closing date for submission of bids, excluding the last date of submission of bids. Scanned copy of Bank Guarantee submitted for Bid Security shall be uploaded. It is mandatory to upload the copy of BG if it is chosen to submit the Bid Security in the form of Bank Guarantee. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- Submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid.
PAN COPY : Copy of PAN Card shall be uploaded.
GST REGISTRATION CERTIFICATE: Copy of GST Registration Certificate shall be uploaded.
NEFT MANDATE : Bank official certified, filled-in copy of 'Electronic Fund Transfer Mandate form' (NEFT Form) containing tenderer's bank account details such as Name of the Bank, Bank Branch Code, Account Number, IFSC Code, etc., shall be uploaded.
RATES ARE ALL INCLUSIVE : All rates quoted by the tenderer for this work tenders shall be deemed to be inclusive of all taxes, duties, royalties, octroi, cess etc. payable by the contractor to the Govt. or any public body and no additional amount / rate or claim will be entertained on this account by the Railways. Also no claim whatsoever will be accepted by Railways on account of revision of tax rates, new taxes of statutory nature by State/Central Govt, unless otherwise any specific instruction from the statutory authorities as per extant rules.
ASSOCIATION WITH RETIRED RAILWAY EMPLOYEE : The Contractor shall abide by the instructions contained in the Clause No.16 of Annexure I of Part I and Clause No. 59(9) of Part II of Indian Railways Standard General Conditions of Contract, April 2022. In this connection, the contractor shall clearly furnish the details of employment / partnership, etc., of retired Railway employees, if any. In case of no retired railway employee associated with the firm, a statement as per the sample format at Annexure - C failing which the bid will be summarily rejected
CONSTITUTION OF THE TENDERER'S FIRM : The tenderer shall clearly specify whether the tender is submitted on his own (proprietary firm) or on behalf of a partnership Firm / Company / Joint Venture(JV) / Registered Society / Registered Trust / HUF / LLP etc. Based on their constitution of the firm, they must submit the mandatory documents mentioned hereunder, as applicable and if same is not submitted the offer will be summarily rejected. The tenderer(s) shall enclose the attested copies of constitution of their concern, and copy of PAN card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the Firm, Company, Association, Trust or Society, as the case may be.
a)If the tenderer is a Sole Proprietorship Firm, they shall submit the notarized copy of an affidavit in this regard along with copy of their Pan card, failing which the bid will be summarily rejected
b)If the tenderer is a Hindu Undivided Family (HUF), they shall submit a copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
c)If the tenderer is a Partnership Firm, they shall submit (i) a notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar, (ii) a notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm, (iii) an undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt, of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm / LLP in which they were / are partners / members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract and failing which the bid will be summarily rejected.
d) If the tenderer is a Joint Venture (JV) - (If Applicable), they shall submit all the relevant documents as mentioned in para 17 of the Tender Form (Second Sheet) of GCC. (A tender from JV shall be considered only where permissible as per the tender conditions)
e)If the tenderer is a Company registered under Companies Act 2013, they shall submit (i) the copies of MOA (Memorandum of Association) and AOA (Articles of Association) of the company, (ii) a copy of Certificate of Incorporation and (iii) a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company ,failing which the bid will be summarily rejected
f)If the tenderer is a LLP (Limited Liability Partnership), they shall submit (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation, (iii) a copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP, (iv) an undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Government of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm / LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract and failing which the bid will be summarily rejected
g)If the tenderer is a Registered Society & Registered Trust, they shall submit (i) a copy of Certificate of Registration, (ii) a copy of Memorandum of Association of Society/Trust Deed, (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust, (iv) a copy of Rules & Regulations of the Society.
POWER OF ATTORNEY : The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected.
INSTRUCTIONS REGARDING LC - PART 1 : (i)For all the tenders having advertised cost of Rs. 10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement. (ii)This option of taking payment through LC arrangement has to be exercised in IREPS (Indian Railway Electronic Procurement System - the e-application on which tenders are called by Railways) by the tenderer at the time of bidding itself, and the tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. (iii)The option so exercised, shall be an integral part of the bidder's offer. (iv)The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (v)In case tenderer opts for payment through LC, following shall be the procedure to deal release of payment through LC: (a)The LC shall be a sight LC. (b)The contractor shall select his Advising/Negotiating bank for LC. The incidental cost towards issue of LC and its operation thereof shall be borne by the contractor. (c)SBI, New Delhi, Main Branch will be the nodal branch for issue of LCs based on online requests received from Railway Accounts Units for tenders opened in financial year 2018-19. SBI branches where the respective Railway Accounts Office has its Account (local SBI branch) will be the issuance/reimbursing branch for LC issued under this arrangement. The Bank shall remain same for this tender till completion of contract. The incidental cost @ 0.15 % per annum of LC value, towards issue of LC and operation thereof shall be borne by the contractor and shall be recovered from his bills. (d)The LC shall be opened initially for duration of 180 to 365 days in consultation with contractor. The LC shall be extended time to time as per the progress of the contract, on the request of the contractor. The value of LC to be opened initially as well as extended thereafter shall be finalised by the engineer in consultation with the contractor on the basis of expected progress of work. (e)The LC terms and conditions shall inter-alia indemnify and save harmless the Railway from and against all losses, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the contractor, his agents or employees, in relation to the Letter of Credit (LC). All sums payable/borne by Railways on this account shall be considered as reasonable compensation and paid by contractor.
INSTRUCTIONS REGARDING LC - PART 2 : (f)The LC terms and conditions shall inter-alia provide that Railways will issue a Document of Authorisation after passing the bill for completed work, to enable contractor to claim the authorized amount from their bank. (g)The acceptable, agreed upon document for payments to be released under the LC shall be the Document of Authorisation. (h)The Document of Authorisation shall be issued by Railway Accounts Office against each bill passed by Railways. (i)On issuance of Document of Authorisation, a copy of Document of Authorisation shall be posted on IREPS for download by the contractor. A digitally signed copy of Document of Authorisation shall also be sent by Railway Accounts Office to Railway's bank (Local SBI Branch). (j)The contractor shall take print out of the Document of Authorisation available on IREPS and present his claim to his bank (advising Bank) for necessary payments as per LC terms and conditions. The claim shall comprise of copy of Document of Authorisation, Bill of Exchange and Bill. (k)The payment against LC shall be subject to verification from Railway's Bank (Local SBI Branch). (l)The contractor's bank (advising bank) shall submit the documents to the Railways Bank (Local SBI Branch0. (m)The Railway's bank (issuing bank) shall, after verifying the claim so received w.r.t. the digitally signed Document of Authorisation received from Railway Accounts Office, release the payment to contractor's bank (advising bank) for crediting the same to contractor's account. (n)Any number of bills can be dealt within one LC, provided the sum total of payments to contractor is within the amount for which LC has been opened. (o)The LC shall shall be closed after the release of final payment including PVC amount, if any, to the contractor. (p)The release of performance guarantee or security deposit shall be dealt directly by Railway with the contractor i.e., not through LC.
PAYMENT OF TENDER DOCUMENT COST : The tenderer shall deposit the Tender Document Cost (If applicable) as stipulated in the tender document, ONLY through online modes as permitted in IREPS application.
MUTUALLY BINDING : If the tenderer's offer is accepted, until the formal agreement is executed, acceptance of this tender shall constitute a binding contract between Railways and the tenderer / contractor, subject to modifications, as may be mutually agreed to between Railways and the tenderer / contractor and it will be indicated in the letter of acceptance of the tenderer / contractor's offer for this work.
ABIDANCE WITH GCC & ALL CONDITIONS : I / We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to-date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions of contract , General Instructions and conditions, explanatory notes for schedule of work and all the Annexures.
OFFER VALIDITY : I/We agree to keep this offer open for acceptance, during offer validity period as mentioned in the tender document, from the date of tender opening and in default thereof I/We will be liable for forfeiture of my/our Earnest Money. I/We offer to do the work for Railway, at the rates quoted in the attached Schedule and hereby bind myself/ourselves to complete the works in all respects.
RIGHTS OF RAILWAYS TO INCLUDE CONDITIONS :Railways shall have the right to incorporate any such condition quoted by tenderer, in the contract, at Railway's discretion, if contract is placed on the tenderer.
TENDERER TO READ ALL CONDITIONS : I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter- se ranking
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Before quoting the rates for schedule items, the Schedule shall be read in conjunction with its explanatory notes for detailed description of various items included therein.
Indian Railways Standard General Conditions of Contract, GCC, April 2022, including all it's correction slips, upto date is applicable for this contract.
Provision of the GST Act is effective across the country from 1st July, 2017. Hence, this contract would be subjected to GST Act & Rules as applicable from time to time.
I f the Tenderer (s) deliberately give(s) w r o n g information/incorrect documents in his/their tender or create circumstances for the acceptance of his/their tender , the Railway reserves the right to reject such tender at a n y stage. The entire EMD and any other dues available with Railway against that contract will be forfeited. Action will be taken to suspend the business w i t h the tenderer for a period o f o n e year . I n addition, Administration reserves the right to prosecute the tenderer under suitable law.
All terms and conditions in the tender documents are binding on the Tenderers.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
The Tenderers are advised t o visit the site o f work i n their own interest and acquaint themselves with the site conditions and expected quantum of work and assess all the site specific difficulties to be experienced while executing the same and the rate shall be arrived duly considering all the facts above and quoted in the tender. Any representation at a later date specifying the site difficulties shall not be considered.
The tenderer shall go through the entire tender documents thoroughly and strictly adhere the instructions and directions given at different pages.
Tender Document Cost once paid is non-refundable.
Unreleased EMD of any tenderers, i f a n y , h e l d w i t h t h e Railway Administration, shall not be adjusted towards the EMD to be remitted.
Contractors are allowed TO make payments against this tender towards tender document cost (if applicable) ONLY through ONLINE payment modes available in IREPS portal, LIKE net banking, debit card, credit card etc. MANUAL payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are NOT allowed.
Tiruchchirappalli division: Augmentation of existing Substation to accommodate additional loads in Tiruvarur junction 11KV/433VSubstation - Electrical arrangements- Works Contract
TPJ-E-12-2026-2027
TPJ-E-12-2026-2027
Open
Works - General
120 Days
Chennai, Tamil Nadu
₹0
₹2.5 L
15 Jun 2026
22 May 2026
1 Jun 2026
132 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,23,63,681.57 | ||
| — | 1.00 | — | — | ||
| Design, Fabriction, supply at site, erection, testing and commissioning of Outdoor type RMU Consisting of 11 kV, 630 A three Way Load Break Switch (LBS),(1 LBS as Incoming control and 2 LBS as Out going control) in SF 6 insulated, metering compartment with series trip, in the minimum 2mm thickness sheet steel enclosure and interconnection between HT switch gear as per enclosed detailed specification.This item requires inspection certificate from M/s RITES. | — | — | — | 11,00,500 | |
| — | 2.00 | — | — | ||
| Design, Fabriction, supply at site erection, testing and commissioning of Outdoor type Compact Sub - Station of 11KV/433V, 250 kVA consisting of 1No 11 kV 630 A SF6/VCB insulated compact RMU as a incoming control on HV side, 11 kV/433 V, 250 kVA Oil cooled type, copper wound transformer and LT section with one ACB as incoming and outgoing feeder. Aluminium Wound Transformer, 630 Amps ACB 50 kA 4 pole MDO type micro processor based release SCADA compatible for LT incomer as per enclosed detailed specification. This item requires inspection certificate from M/s RITES. | — | — | — | 71,50,000 | |
| — | 1.00 | — | — | ||
| — | Lumpsum | — | — | ||
| Removal of Existing Transformers and LT panel including shifting to location as instructed by site Engineer incharge. | — | — | — | 13,651 | |
| — | 800.00 | — | — | ||
| Excavation of cable / pipe trench and pits of required width, length in mixed soils conditions removing obstruction if any including tools & plants, labour etc., and as per instruction of site Engineer in charge and as per drawing No: DRM/EL/TPJ/40-2016. | — | — | — | 3,58,400 | |
| — | 20.00 | — | — | ||
| Dismantling of tar road including necessary tools & plant labour etc., and as per instruction of site Engineer in charge | — | — | — | 4,140 | |
| — | 12.00 | — | — | ||
| Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge | — | — | — | 35,137.2 | |
| — | 5.00 | — | — | ||
| Demolishing plain cement concrete including disposal of material within 50m lead of mix leaner than 1:2:4 with coarse aggregate and tools & plant labour etc., and as per instruction of site Engineer in charge | — | — | — | 2,850 | |
| — | 10.00 | — | — | ||
| Providing and laying of Plain Cement Concrete by mixing of 1:3:6 including supply of cement, sand etc and tools & plant labour etc., and as per instruction of site Engineer in charge for plinth and as required at site. | — | — | — | 43,270 | |
| — | 500.00 | — | — | ||
| Supply and Laying of one layer of country bricks (breadth wise) closely | — | — | — | 5,000 | |
| — | 720.00 | — | — | ||
| Refilling of cable trench and pit by excavated soil | — | — | — | 37,440 | |
| — | 100.00 | — | — | ||
| Laying and testing of HTUG power cable of size 95 sqmm complete with required tools & accessories. Note: HTUG cable of size 95sqmm will be supplied by railways | — | — | — | 5,036 | |
| — | 40.00 | — | — | ||
| Provision of horizontal boring to suit insertion of heavy duty GI pipe of 150 mm nominal dia. | — | — | — | 2,84,004 | |
| — | 80.00 | — | — | ||
| Supply and laying of 160 mm dia. PN-4, PE 63 grade HDPE pipe in the excavated trench.The price offered shall be inclusive of the cost of supply and laying of PN-4, PE - 63 grade,HDPE pipe confirming to IS specification no. 4984/1995 or latest. The actual length of the HDPE pipe required for execution shall be measured after preparing the location drawing and finalizing the cable route and procurement shall be done according to the cable trench length as given in the approved location drawing. For jointing the HDPE pipes wherever required suitable, ISI marked PVC coupling of 6 KgF rating shall be used and both the pipeshall be joined together firmly with suitable solvent. No Extra payment will be admissible for supply and fixing the PVC couplings. The rate offered shall be inclusive of all the costof labour required for uncoiling and laying the HDPE pipe at site. | — | — | — | 76,000 | |
| — | 1.00 | — | — | ||
| Supply and fixing of RCC slab type HTcable route indicator as per drawingNo: CEE/CN/MS/28- 2004 | — | — | — | 1,027.95 | |
| — | 20.00 | — | — | ||
| Supply and fixing of medium duty GI pipe of 150 mm dia, conforming to IS.1239,part 1 (2004) , for cable leading without clamp | — | — | — | 30,000 | |
| — | 100.00 | — | — | ||
| Fabrication, supply and fixing of clamps made out MS flats for fabrication of clamp for fixing of cover for existing power cable / enclosures made out of sheet metal given in this schedule etc. This shall be made out of MS flat of suitable size, powder coated of suitable colour as instructed by the engineer in charge and using GI bolts with nuts of suitable size for fixing.Note: This shall be made use for fixing of cover for existing power cable and new enclosures other than enclosures already covered in the schedule | — | — | — | 13,400 | |
| — | 2.00 | — | — | ||
| Supply, fixing and testing of straight through heat shrinkable type kit suitable for HTUG, 11 kV, XLPE insulated, PVC sheathed, armoured and screened aluminium cable of 3 core 95 sqmm size. This shall be equivalent to cat. Ref. No:EPKJ 3116 of M/s. Raychem RPG make | — | — | — | 39,000 | |
| — | 4.00 | — | — | ||
| Supply, fixing and testing of outdoor type heat shrinkable, cable end termination kit suitable for HTUG, 11 kV, XLPE insulated, PVC sheathed, armoured and screened aluminium cable of 3 core 95 sqmm size. This shall be equivalent to cat. Ref. No:EPKT 3352 of M/s. Raychem RPG make | — | — | — | 48,000 | |
| — | 8.00 | — | — | ||
| Supply and fixing of Danger Board suitable for 11 KV system, as per IS. No:2551(1982) and of 300mm X200 mm (10" X 8") size.This shall be fixed with one number of clamps made out of MS flat of 25mm X 4 mm size including bolts & nuts for fixing onstructures painted with two coats in each of primer zinc chromate and aluminum paints. The danger board should be trilingual viz. Hindi,English and Vernacular language | — | — | — | 4,400 | |
| — | 10.00 | — | — | ||
| Supply, erection and testing of HT earthing arrangements duly stenciling of earth resistance value along with date as per drawing number CEE/CN/MS/37-2004 with all accessories and copper plate of sizes including supply and spreading of 10 kgs in each salt and charcoal for earth treatment in an approved manner as directed by Engineer incharge at site. | — | — | — | 1,64,000 | |
| — | 1.00 | — | — | ||
| Provision of printing the substation Electrical Drawing in the viniyal (Approx. Size 6 X 4 feet) and same has to be fixed in the suitable location as directed at site Engineer | — | — | — | 3,300 | |
| — | 40.00 | — | — | ||
| Supply, laying and connection of 40 X 6 mm GI flat to earth electrode from electrical installations as per standard including minor fabrication works required. | — | — | — | 14,240 | |
| — | 15.00 | — | — | ||
| Supply and provision of mass concrete for plinths of transformers, panel boards, kiosks and as instructed by Engineer - incharge with 1:2:4 ratio using 20 mm blue metal | — | — | — | 1,05,000 | |
| — | 1.00 | — | — | ||
| Provision of Inspection pit with RCC slab cover of size 0.45x0.45x0.6m depth as per drawing number CEE/CN/MS/31- 2004 in an approved manner as directed by Engineer in charge at site | — | — | — | 3,926 | |
| — | 20.00 | — | — | ||
| Construction of Masonry Cable ducts of size 0.4m breath and 0.6m depth in an approved manner as directed by the Section Engineer in charge at site | — | — | — | 50,000 | |
| — | 20.00 | — | — | ||
| Supply and spreading of 40mm blue metal for a height of 10 cm above the ground level over the area after clearing the shrubs, rank vegetation, grass and leveling that area as instructed by Engineer- in-charge at site. | — | — | — | 11,355.8 | |
| — | 5.00 | — | — | ||
| Fabrication, supply and fixing of cable looping box with aluminium bus bars as per drawing No: DRM/EL/TPJ-10-2015 | — | — | — | 38,980 | |
| — | 5.00 | — | — | ||
| Erection of cut rail post up to and including 5.5 feet height with foundation and accessories like base plate, including supply of two coats of each Zinc chromate primer, aluminium paint as per drawing no CEE/CN/MS/20-2004 | — | — | — | 10,555 | |
| — | 800.00 | — | — | ||
| Laying and testing of LTUG power cable of up to and including 50 sqmm size complete with required tools & accessories. nb: LTUG power cable of required size will be supplied by Railway | — | — | — | 19,200 | |
| — | 1750.00 | — | — | ||
| Laying and testing of LTUG power cable of above 50 sqmm but up to and including 185 sqmm size complete with required tools & accessories. nb: LTUG power cable of required size will be supplied by Railway | — | — | — | 73,500 | |
| — | 350.00 | — | — | ||
| Laying and testing of LTUG Power cable of above 185 sqmm but up to and including 400 sq.mm size complete with accessories. .nb: LTUG cable of suitable size only will be supplied by Railways | — | — | — | 18,389 | |
| — | 640.00 | — | — | ||
| Laying of HDPE pipe of up to and including 63mm dia including supplying and fixing of necessary accessories such as straight through coupler etc. nb: HDPE pipe of suitable size only will be supplied by Railway | — | — | — | 24,320 | |
| — | 1500.00 | — | — | ||
| Laying of HDPE pipe of 75 mm dia including supplying and fixing of necessary accessories such as straight through coupler etc. nb: HDPE pipe of suitable size only will be supplied by Railway | — | — | — | 60,000 | |
| — | 280.00 | — | — | ||
| Laying of HDPE pipe of 110 mm dia including supplying and fixing of necessary accessories such as straight through coupler etc. nb: HDPE pipe of suitable size only will be supplied by Railway | — | — | — | 14,436.8 | |
| — | 30.00 | — | — | ||
| Supply and termination and connection of LTUG cable of sizes of up to and including 50 sqmm size with single flange type brass cable gland aluminium crimping sockets. Note: One termination comprises of one number of single flange type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable | — | — | — | 12,180 | |
| — | 20.00 | — | — | ||
| Supply and termination and connection of LTUG cable of sizes above 50 sqmm but up to and including 185 sqmm with aluminium crimping sockets and single flange type brass cable gland.Note: One termination comprises of one number of single flange type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable | — | — | — | 17,220 | |
| — | 6.00 | — | — | ||
| Supply and termination and connection of LTUG cable of sizes above 185 sqmm with aluminium crimping sockets and single flange type brass cable gland.Note: One termination comprises of one number of single flange type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable. | — | — | — | 8,599.32 | |
| — | 10.00 | — | — | ||
| Supply and fixing of heat shrinkable straight through join kit 4C x 50 to 95 sq.mm | — | — | — | 35,000 | |
| — | 10.00 | — | — | ||
| Supply and fixing of heat shrinkable straight through joint kit 4C x 120 to 185sq.mm | — | — | — | 50,000 | |
| — | 24.00 | — | — | ||
| Supply and fixing of medium duty GI pipe of 65 mm dia, conforming to IS.1239,part 1 (2004) , for cable leading without clamp | — | — | — | 25,080 | |
| — | 18.00 | — | — | ||
| Supply and fixing of medium duty GI pipe of 100 mm dia, conforming to IS.1239,part 1 (2004) , for cable leading without clamp | — | — | — | 32,472 | |
| — | 1.00 | — | — | ||
| Fabrication, supply at site, erection, testing commissioning of Medium Tension cubical type switchgear panel made up of 14 SWG MS CRCA sheet with , Incoming ACB 800 A / 4P / 50 kA , 1No 400Amps FP 35KA Changeover switch ,- 2 Nos 400 amps, FP, 35kA, MCCB - 4 Nos 250 amps, FP, 35 kA, MCCB 4 Nos 125 amps, FP, 35 kA, MCCB - 6 Nos 63 amps, FP, 35 kA, MCCB - 4 Nos 32 amps, FP, 35 kA, MCCB - 2 Nos as outgoing control, as per enclosed specification. This item requires inspection certificate from M/s RITES. | — | — | — | 14,83,672.5 | |
| — | 1.00 | — | — | ||
| Fabrication, supply at site, erection, testing commissioning of Medium Tension cubical type switchgear panel made up of 14 SWG MS CRCA sheet with , Incoming 1 no 250A FP MCCB 35kA Change over switch , 6 Nos 125 amps, TPN, 35kA, MCCB - 4 Nos 100 amps, TPN, 35 kA, MCCB as outgoing control, as per enclosed specification and as per DRM/EL/04-2025 | — | — | — | 3,79,259 | |
| — | 10.00 | — | — | ||
| Fabrication, supply and fixing of covers for for various requirements made out of MS sheet steel of 16 SWG thick, powder coated of suitable colour as instructed by the Engineer in charge. This also includes supply and fixing of all required accessories required for the purpose for which the enclosure is proposed to be used. When used for making of enclosures, all accessories including rubber gaskets, hinges, handles locking arrangements shall also be supplied. Note: This is to be made use for fabrication of metering bunks, enclosures for various uses including cover for termination in MCB type distribution boards and switch etc and cable tray etc , which are not covered specifically in this work. | — | — | — | 30,620 | |
| — | 20.00 | — | — | ||
| Supply and fixing of SMC chequered plate as per specification and relevant standards as instructed b y Engineer-in-charge at site | — | — | — | 1,44,000 | |
| — | 4.00 | — | — | ||
| Fabrication, supply and erection of stand for fire bucket as per drawing number CEE/CN/MS/36-2004 along with six numbers of fire buckets, each of 10 liters capacity, filled with coarse river sand and painted in red with white lettering and relevant standards as instructed by Engineer-in-charge at site | — | — | — | 22,000 | |
| — | 10.00 | — | — | ||
| Supply and spreading of chequered electrical rubber mat of 2 m long and 1.0 m wide and 12 mm thick and relevant standards as instructed by Engineer-incharge at site | — | — | — | 32,820 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of Single phase 8way, horizontal type MCB Distribution Board with one number of 2Nos. of 6A to 32A SP MCBs and 4nos of SPN MCBs 6A to 32A MCBs all of 'B' series 10KA capacity in outgoing , double door type including internal wiring, bus bars, earth bar, DIN Channel etc complete with all other accessories | — | — | — | 6,199 | |
| — | 75.00 | — | — | ||
| Chipping and opening of brick wall and closing of opened wall after provision of one metre PVC pipe and covered with plastering in C.M 1:6 mix, 12 mm thick. | — | — | — | 2,850 | |
| — | 300.00 | — | — | ||
| Supply and provision of 25 mm OD rigid heavy duty PVC wiring conduit with ISI mark conforming to IS 9537 : Part I and Part III : 1983 , suitable for concealed electrical wiring with necessary PVC Junction boxes of required ways, PVC bends and coupling in ceiling / beam / wall opened for PVC pipes and as per specification | — | — | — | 26,100 | |
| — | 200.00 | — | — | ||
| Supply and wiring of extension mains through PVC pipes already fixed / embedded by three runs of single core FRLS PVC insulated 1100V Grade ISI marked flexible multi stranded copper wiring cable including green colour wire for earth of 1.50 sqmm size, conforming to IS.694, 2010 as per specification.Note : 3 runs of 1.5sqmm copper cable added together shall be taken as 1m for measurement purpose | — | — | — | 17,400 | |
| — | 75.00 | — | — | ||
| Supply and wiring of extension mains through PVC pipes already fixed / embedded by three runs of single core FRLS PVC insulated 1100V Grade ISI marked flexible multi stranded copper wiring cable including green colour wire for earth of 2.50 sqmm size, conforming to IS.694, 2010 as per specification.Note : 3 runs of 2.5sqmm copper cable added together shall be taken as 1m for measurement purpose | — | — | — | 10,425 | |
| — | 60.00 | — | — | ||
| Supply and wiring of extension mains through PVC pipes already fixed / embedded by three runs of single core FRLS PVC insulated 1100V Grade ISI marked flexible multi stranded copper wiring cable including green colour wire for earth of 4.0 sqmm size, conforming to IS.694, 2010 as per specification.Note : 3 runs of 4sqmm copper cable added together shall be taken as 1m for measurement purpose | — | — | — | 11,400 | |
| — | — | — | Above/ 1220.00 Below/Pa | ||
| Fixing and testing of box type LED tube light luminaire complete with required accessories as per standard. nb: Box type LED tube light luminaire with LED tube only will be supplied by Railway. | — | 10.00 | — | — | |
| — | 4.00 Each/month | — | — | ||
| Fixing and testing of Street light/flood light luminaires with required accessories such as GI bolts with nuts,clamps,arm brackets etc as per the instrctions of Engineer-in-Charge. nb: Street light type / flood light type LED luminaire only will be supplied by Railway. | — | — | — | 784 | |
| — | 20.00 | — | — | ||
| Supply and provision of suitable foundation for the octagonal poles including excavation of pit, shuttering and erection of octagonal pole as per drawing No: DRM/EL/TPJ/37-2018 | — | — | — | 73,360 | |
| — | 20.00 | — | — | ||
| Supply and fixing of 16 ampsBakelite fuse unit, 20 amps SMC connector on 5mm thick SMC sheet inside the Octagonal Poles. The price offered shall be inclusive of the cost of supply and fixing of 16A fuse unit 20A SMC connector 5mm thick SMC sheet inside octagonal pole. The cost offered shall be inclusive of the cost of labour charges for terminating the incoming cable in the octagonal pole. The fuse unit and other accessories shall be confirming to relevant IS specifications. The cable shall be terminated with suitable cable lugs to avoid loose connection in future | — | — | — | 17,600 | |
| — | 20.00 | — | — | ||
| Wiring of light points through octagonal pole with 3 core 1.5 sq.mm wire. The price offered shall be inclusive of the cost of 1.5 sq mm wire PVC insulated copper cable three numbers one for phase, one for neutral and one for earth or 3 core 1.5 sq mm PVC insulated copper cable confirming to IS 694 : 2010 for extending the power supply from the terminal box to the lamps erected on the pole. No intermediate joints will be permitted in copper cable. The price offered shall be inclusive of the cost of labour charges required for wiring the lamp post. If the pole is fitted with double arm arrangement for providing two light fittings, Two sets of cable shall be provided. Measurement will be taken as two for double arm lamp post whereas measurement for this item will be counted as one when pole is equipped with single light fitting | — | — | — | 19,160 | |
| — | 4.00 | — | — | ||
| Fixing of ceiling fan as per standard with required accessories. nb: AC Ceiling fan with standard accessories only will be supplied by Railway. | — | — | — | 892 | |
| — | 2.00 | — | — | ||
| Supply and fixing of modular type sub control board, 12 module, two row type, in a concealed manner including chipping and plastering etc. This shall be similar to cat. Ref. No: 689011 for metal flush box, 675572 for white plate with frame, all of Mylinc model of M/s. Legrand make or equivalent including internal wiring | — | — | — | 2,092 | |
| — | 2.00 | — | — | ||
| Supply and fixing of modular type sub control board, 9 module, two row type, in a concealed manner including chipping and plastering etc. This shall be similar to cat. Ref. No: 689011 for metal flush box, 675572 for white plate with frame, all of Mylinc model of M/s. Legrand make or equivalent including internal wiring | — | — | — | 1,718 | |
| — | 25.00 | — | — | ||
| Supply and fixing of modular type single pole one way switch of 6 A capacity, one module type, in the already fixed modular type switch board including internal wiring. This shall be similar to cat. Ref. No:675501 of Mylinc model of M/s. Legrand make or equivalent | — | — | — | 2,850 | |
| — | 5.00 | — | — | ||
| Supply and provision of modular type socket 6 A capacity, 2/3 pin combined, two module type in the already fixed modular type switch board including internal wiring. This shall be similar to cat. Ref. No:675550 of Mylinc model of M/s. Legrand make or equivalent | — | — | — | 1,155 | |
| — | 5.00 | — | — | ||
| Excavation, construction of earth pit, and provision of earth pipe complete with heavy duty GI pipe 50 mm dia with ISI mark complete with all other accessories as per Drawing. No EL / P / Type 1022 | — | — | — | 24,295 | |
| — | 200.00 | — | — | ||
| Supply and connection of single run of 6 SWG GI wire from main control board & electrical installations to earth pipe | — | — | — | 8,800 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREA24.pdf
ATTACHMENT
ANNEXURED26.pdf
ATTACHMENT
GCCapril2022_1.pdf
ATTACHMENT
BankNEFTform.pdf
ATTACHMENT
GCCACS11-compressed.pdf
ATTACHMENT
Decalaration.pdf
ATTACHMENT
GCCannexureVIB.pdf
ATTACHMENT
INSTRUCTIONSTOTENDERERStvrsubstation.pdf
ATTACHMENT
TVRAUGMENTATIONOF11KVSSSPECIFICATIONSIGNED2.pdf specification
ATTACHMENT
PGformat2.pdf
ATTACHMENT
ListofdrawingsforAugmentationofTVRSubstation.pdf
ATTACHMENT
GCC_Works_April_2022_with_ACS_1_to_ACS_10.pdf
ATTACHMENT
GCC_Works_April_2022_with_ACS_1_to_ACS_9.pdf
ATTACHMENT
TVRAUGMENTATIONOF11KVSSSPECIFICATIONSIGNED2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .