ADDITION ALTERATION AND ASSOCIATED WORK IN TRAINING BUILDING NO T05 T08 T11 AND T 24 NEAR DHOBI GHAT OF RRRC IN THE AREA OF AGE BR I

Amount

Demolition of brick work built in cement or cement mortar of any description including quoins,arches,pillars, etc. all as specified and directed by Engr-in-Charge.

M & L for brick work with Cement Mortar1:6 , using sub class 'B' bricks,old size , straightor curved on plan exceeding 6 m mean radius all as specified and directed.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

Dismantling tunframed timber scantlings 40sq cm and over in section in any position all as specified and directed

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L rolled sections as in main and cross beams, hip and jack rafters; purlins, truss etc where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and directed

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of concrete (rainforcement) and pavings n.exc 15 cm thickness (below or above ground level)

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as filling and mass concrete as in plinth protection

M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggreate) as filling and mass concrete as in sub base of flooring

M&L Providing cement concrete in coping type B-1 ,1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L for vetrified ceramic tiles of size 600 x 600 x 9-10mm thick as in floor over 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match all as specified and directed.

M & L vetrified ceremic tiles coloured of size 600 x 100 mm x 9-10 mm thick on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed (Make : SOMANY/ORIENT).

M&L for machine cut polished Machine cut kota stone 20-25mm thick as in floor, steps, pillar fixed with neat cement slurry over backing coat of 20mm thick in CM (1:4) including rubbing and polishing complete all as specified.

M&L for machine cut polished Machine cut kota stone 20-25mm thick as in 20-25mm thick as in riser of steps, skirting, dado and pillar laid over cement screed bed 15 mm thick (1: 4) and jointed including rubbing and polishing complete all as specified.

M&L for extra grinding mirror polished (four cut) of kota stone as flooring and skirting/Dado complete all as specified & directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling up to two storey bldg all as specificed

M&L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper over wall care putty complete all as specified.

M&L for old decorated surfaces plastered or unplastered surface of wall and complete removal of existing treatment by rubbing , brooming down,washing with water etc applying two coat of oil bond distemper over one coat of putty on wall complete all a spcefied.

M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge.

M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty complete all as specified and directed.

S&F 3.15mm dia plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and directed.

Dismantling of wall/ceiling & cup board fibre pulp AC boards etc any thickness including cover fillets including fixture as necessary at site including frame work

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32mm of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items wire (galvanising @ 80 grams per sqm) with suitable double folded hanging wire up to 1000mm length and fix up in the main runner T section at every 1200mm or less than that if required as per direction by Engineer-in-charge. Further the work shall be carried out as per specification drawing and as per directions of the Engineer -in- charge.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm but nexc 4 sqm each all as spd.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame ) but nexc 1.5 sqm each all as spd.

M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed

S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, 4 mm thick tinted coloured glass, screws etc. provision for fixing the exhaust fancomplete all as specified and as directed

S&F flush shutter 35 mm thick solid core moulded construction with block board core and plywood face surface laminated panels covered with decorative face veneer on both face with lipping/framematch complete all as specified and directed.

S&F glazed skelton shutter IInd class hard wood 35 mm thick rebated and prepared to received glass, gauge etc devided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 150 mm size, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as spd.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as spd.

S & F butt hinges mild steel for 100mm long fixed with screw to door frame complete all as specified & directed.

S & F 150mm long aluminum anodized barrel tower bolt extruded section.

S & F 150 mm Aluminium anodised handles, cast type

S & F 300 mm long Aluminium alloy anodised sliding door bolts with hasp staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

Material and labolur for preparing new wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified.

S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as directed.

S&F aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete, all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete, all as specified and directed.

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

Taking down old MCCB,TPN DBs , SPN DBs,SP MCB & Main Switch/enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.

Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

(a) One light/fan point controlled by one by one way switch ( switch to be measured and paid separtely)

(b) One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

(c) -ditto- as above item No 5 (b) but Same board.

One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete (socket and switches to be measured and paid separately)

M&L for Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through in & including PVC casing caping or PVC conduit as required on site complete all as specified.

M&L switch Piano flush type 5 Amp SP one way all as specified and directed by Engr in Charge.

M&L switch piano flush type 15 Amp SP one way all as specified and directed by Engr in Charge.

M&L socket outlet 5 pin 5 Amp flush type all as specified and directed by Engr in Charge.

M&L socket outlet 2 in 1,3 pin 5/15 Amps all as specified and directed by Engr in Charge.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body.

S & F electronic fan regulator 5 step 360 degree rotation connecting complete all as specified

M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

Supply and fix LED batten luminaire surface mounted T-8, 4 feet system wattage of 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base all as specified and directed.

S&F on wall 35 Watt High efficient LED Street light fitting including provision of 25 mm dia GI light grade pipe 0.5 meter length bend to shape and necessary clamps and connection with 3 core 2.5 sqmm sheathed copper conductor cable from kisock box to fiitng etc complete as specified and directed.

Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and checking it for its serviceability and deposite to MES store all as specified and directed.

Supply and fixing ceiling fans complete with blade, down rods, electronic regulator and accessories rate speed not less than 300 RPM, 230V, 1200 mm sweep, air delivery not less than 220 CMM with service value not less than 7.5 CMM/W, BEE five star rated voltage range 140-280 volts power factor >.9 and THD <20% with brushes direct current motor (BLDC) all as specified and directed by the Engr-in-Charge. Note: Down rods length should be as per site requirement and operated with remote, Against BLDC conversion

S&F factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

Supply and fix in repair MCCB 160 Amps, FP 415 volts 36 KA, 4 Pole, 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

M&L distribution board SPN 8 way with 200 Amp rated bus bar double door.

M&L MCB SPN 40 Amp "B " curve .

S&F MCB SP 6-32 Amps 240 volts curve 'B' series 10 KA 50 HZ complete all as specified and directed.

M/S ANIL KUMAR (BID ID -3069175)

SHREE RAM BUILD TECH (BID ID -3081079)

V M CONSTRUCTION (BID ID -3082980)

JYOTI ENTERPRISES (BID ID -3080944)

M/s M M BAHL (BID ID -3070707)

M/s SAAR ENGINEERS (BID ID -3091908)

SHIVA ENTERPRISES (BID ID -3070528)