Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.1 LAccepted-AOC D 35 1ST FLOOR CLOCK TOWER HARI NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | 1 | Accepted-AOC LOWEST RATE | |
| 2 | 2₹27.9 L+₹3.8 L (15.9%)Rejected-Finance D 2 212 JEEVAN PARK PANKHA ROAD UTTAM NAGAR WEST DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | 2 | Rejected-Finance NOT LOWEST |
Tender Value
₹26.4 L
EMD Value
₹52,860
Closing Date
18 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
PROVN OF LPG GAS STORE AND CONCRETE SITTING PODIUM AT FOOTBALL GROUND AF STN BASANT NAGAR AND PALAM UNDER GE (AF) PALAM, DELHI CANTT-10
2022_MES_553002_1
GENP-49/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹52,860
Yes
24 Apr 2023
20 Sept 2022
19 Oct 2022
20 Sept 2022
18 Oct 2022
5 Oct 2022
Amount
Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth and getting out in soft/loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and directed.
Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point.
M&L for providing cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregate) in sub base, foundation, mass concrete and fillings.
M&L for form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.
M&L for providing reinforcement cement concrete M-25 nominal mix as in footing, foundation,beams, plinth beams, base for columns and mass concrete.
M&L for form work to side of columns and simillar work complete.
M&L for providing reinforcement cement concrete M-25 (Nominal Mix) as in columns and pillars etc complete.
M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels and simillar work complete.
M&L for providing reinforcement cement concrete M-25 (Nominal Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete.
M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete.
M&L for providing reinforcement cement concrete M-25 (Nominal Mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete.
S&F mild steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia.
All as per item No. 14 above but 8mm dia as in stirrups, spacers and binders.
Material & labour for brick work with sub class 'B' brick using old size straight or curved on plan exc 6m mean radius built in CM 1:6.
Material & labour for brick work with sub class 'B' brick using old size straight or curved on plan to any radius in half brick thick walls built in CM 1:4.
M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing surface even and smooth without using extra cement on wall.
M&L for 15 mm thick cement plaster in two layers i.e 1st layer 10mm thick in CM 1:4 and 2nd layer 5mm thick in CM 1:4 using WPC by weight as per manufacturer's instruction on fair faces of brick work or concrete surfaces including finished even and fair surface without using extra cement. (Note : WPC shall be measured & paid separately as supply only).
Supply only Liquid water proofing compound of approved quality.
M&L for 5 mm thick cement plater in cement mortar 1:3 as in ceiling including finishing surface even & smooth without using extra cement.
M&L for two coats of oil bound distemper over a coat of primer using roller including necessary scaffolding etc. after preparation of newly plastered surfaces on walls.
M&L for two coats of oil bound distemper on ceiling over a coat of primer using roller including necessary scaffolding etc. after preparation of newly plastered surfaces.
M&L for prepration of newly plastered surface and finishing walls with premium Acrylic Smooth Exterior paint with Silicone additives of required shade, New york ( Two coats applied @ 1.43 ltr/ 10 Sqm of Make wall mista of berger paints or its equivalent in Asian paint, Nerolac etc having three years of performance warranty over priming coat of exterior primer applied @ 2.20 kg/10 Sqm all as per manufacturer instructions.
M&L for hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path.
M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base to floors complete all as specified and directed.
M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over & including 15mm thick screed bed in cement mortar 1:4 complete.
M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick as on vertical surface such as dado, skirting, wall etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete.
M&L for vitrified tiles coloured (light shade) 10 mm thick, area of each tile n. exc. 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bedding in cement mortar 1:6 complete.
All as per item No. 29 above but on vertical surfaces such as skirting, dado etc complete.
M&L for factory made, machine pressed, precast concrete interlocking paver block any shape and size with grey cement and pigment to match and confirming to IS 15658-2006 of 60mm thick in M-35 grade laid over 50 mm thick sand cushioning complete.
M&L for stone, boulders, broken bricks, concrete etc. suitable for handpacking, filling of hardcore from excavated soil heaps including depositing, spreading and levelling in layers n. exc. 25cm, watered and rolled/rammed to a true surface
M&L for factory made chequered tiles 300mm x 300mm x 25mm thick rubber finished set jointed and pointed in neat and cement slurry in floors with cement and pigment laid over screed bed or bedding layer of 15 mm thick in cement mortar 1:6.
M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) including finishing cement concrete surface even and smooth without using extra cement as in plinth protection including making joints and filled with bitumuneous mastic complete.
S&F factory made PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.
S&F for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F rolled framed mild steel work as in doors, cladding, chowkhats/frame or similar work etc including welding hold fast, hinges etc conforming to Fe-290 Gde-E-165 grade.
S&F for 35 mm thick factory made flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete.
M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared to receive wiremesh, glass panes etc framing plain chamfered or rounded fitted with cut and mitered heads for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.
S&F for butt hinges, stainless steel, ISI Marked 100mm size.
S&F extruded aluminium alloy handles, fabricated type anodised of 125mm long.
S&F for aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long.
S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
M&L for factory made steel vantilator with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded.
M&L for 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each pane.
S&F for powder coated aluminium anodized frame for doors, windows, ventilators with or more rebates including jointing cleat for fixing etc complete.
S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.
M&L for preparation of newly steel surface and applying two coats of synthetic enamel paints over a coat of red oxide primer.
S&F for vitreous china wash down water closet white (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat white closed pattern with flat bottom and cover and mild steel CP hinging device complete.
S&F PVC valveless, syphonic action type flushing cistern of 10 Ltr capacity,low level white with inlet ball valve, float and handle including bracket complete all as specifed and directed.
S&F flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specifed and directed.
S&F vitreous china wash basin white of size 550x400mm including cutting for and pinning ends of brackets or erecting stand complete all as specifed and directed.
S&F PVC connection 15mm size, 450mm long with PTMT nuts both side complete.
S&F for waste fittings, brass chromium plated for glazed ware sink, basins etc with long screwed shanks and fly-nuts, flanged end bedded in red lead and other end fixed complete.
S&F rotational moulded polyethylene water storage tankof 500 ltr capacity (cylindrical vertical with closed top) three layers, hoisted and fixed in position all as specified and directed.
S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia.
S&F bib tap, fancy type, chromium plated with crunch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed of 15mm bore.
S&F pillar tap, fancy type, cast copper alloy, chromium plated 15mm bore complete.
S&F stop valve, fancy type, chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe.
S&F 15mm GI tubing 'Medium grade' with all fittings and fixed with wall, ceiling or laid in floor complete.
All as per item No. 60 above but 20mm bore.
M&L for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified
S&F cast iron 'P' trap 100mm bore.
S&F 100mm bore, cast iron soil, waste and vent (sand cast) pipes in any length with or without ears, with cement joints, laid in trenches or in floors.
S&F for 75mm bore cast iron soil, waste and vent pipe (sand cast) in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval and fixed with cement joints complete.
S&F cast iron 100mm bore bend with oval access door.
S&F cast iron 100mm single branch piece with oval access door.
S&F cast iron bend of 75mm bore with oval access door.
S&F cast iron cowl for 100 mm bore pipe.
M&L for providing cement concrete bed to 150mm drain pipe including packing under and hauching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-1 (using 40mm graded stone aggregate) complete.
M&L for salt-glazed stone ware drain pipe, grade 'A' of internal dia of pipe 150mm laid in trenches and jointed as specified.
M&L salt glazed stoneware gully trap, square mouthed floor trap, plain with grating including jointing with solvent cement of 100mm dia complete.
M&L for point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including pressed steel boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLSH cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall for one light point controlled by one switch one way.
All as per item No. 73 above but for one ceiling fan/exhaust fan point controlled by one switch.
All as per item No. 73 above but one socket outlet 5 Amp controlled by one switch on independent board.
All as per item No. 73 above but one 3 pin 5Amps socket out let point on the same board controlled by one switch complete.
All as per item No 73 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete.
S&F ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete.
S&F switch piano flush type 5 Amps, single pole one way.
S&F socket out let 2/3 pin 5 Amps, flush type.
S&F switch piano flush type single pole one way15 Amps.
S&F socket outlet 2 in 1, 6 pin 5/15 Amps, flush type.
S&F for stepped type fan regulator 300 watt, 230 volts, 50 HZ, AC supply.
S&F for indoor decorative LED battens- integrated type 20 watt 4 feet white fixture, complete with driver and all accessories internally pre wired and including connecting up with twin core copper conductor cable complete.
S&F for indoor decorative LED battens- integrated type 20 watt 2 feet white fixture, complete with driver and all accessories internally pre wired and including connecting up with twin core copper conductor cable complete.
S&F sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete.
S&F MCB,SPN 40 Amp,10 KA complete.
S&F 240V 10KA 'B' curve MCB of single pole and current carrying capacity 6 to 32 A, in the MCB DB complete with connection testing and commissioning complete.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) in 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber of 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm in 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No. 5 of MES SSR Part-I (2020) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete including necessary earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.
M&L for preparation of newly plastered surface of walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade.
M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base including use of necessary form work.
M&L for 75 mm thick cement concrete in 1:2:4, type B-2 using 40mm graded aggregate as in floor including finishing surface even and smooth without using extra cement including use of necessary form work.
Supply for 38mm wide glass dividing strips 3mm thick, inserted in position, conforming to design as in floor.
SACHDEVA ENGINEERING WORKS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .