GE/C-51/2021-22

Amount

M& L for laying cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic including demolition of existing PCC as in plinth protection complete all as specified and disposing debries outside MOD land all as directed by Engr-in-Charge.

M & L for 50 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth using extra cement, including demolition of existing PCC as in flooring all as specified and disposing debries outside MOD land complete all as specified.

M& L for Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick with mixture of grey cement & pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in C M 1:6 including cement concrete 1:2:4 type B 1 (20mm graded stone aggregate) as in levelling course 25mm thick including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed by Engr-in-Charge. Make Unistones/ Nitco/ Ultra Tiles.

M&L Machine cut kota stone slab of size 550mm x 550mm flooring 18-20 mm thick over and incl cement screed bed 20mm thick CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing mirror polished incl demolition of existing flooring/steps/jambs etc all as specified and as directed.

M & L Machine pressed precast concrete rubber moulded interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade including cement concrete 1:3:6 type C2 (40mm graded stone aggregate) as in sub base 75mm thick and 25 mm thick sand cushioning including demolition of existing flooring/hardstanding all as specified and disposing to debries etc all as directed by Engr-in-Charge. Make Unistones/ Nitco/ Ultra Tiles.

M&L for Providing precast cement concrete 1:2:4 type B1 using 12.50mm graded aggregate, louvres and jallies, 40mm thick (measured solid) set in cm 1:4, including all mouldings but excluding frame including demolition of existing RCC jali all as specified and disposing of debries etc as directed by Engr-in-Charge.

S and F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S & F Framed work such as MS angle, Tee, channel, FI etc in purlin /rafter (Fe 410-W(Gde-E250) quality-A incl demolition of existed items all as specified and directed.

M&L mild steel work as in tubular Purlin, Rafter etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including necessary welding etc complete all as specified and directed.

Supply and fix pre painted galvalume aluminum ZINC coating GI base corrugated steel 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw with minimum 150mm end lap and one corrugation side lap including dismantling the existing sheets complete all as specified and directed.

M&L for Preparation of New/old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified.

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

All as per item no 13 before but except bricks

M&L cement concrete 1:3:6 type C2 using 40mm graded aggregate in surface channels and drains etc incl demolition of existing drain, surface channel all as specified and disposing of debries etc as directed by Engr-in-Charge.

M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.

M&L Cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundations, filling and mass-concrete all as specified and disposing of debries as directed by Engr-in-Charge.

M&L cement concrete 1:2:4 type B1 using 20mm graded aggregate in surface channels and drains etc all as specified and disposing of debries etc as directed by Engr-in-Charge.

M&L for Providing cement concrete 1:2:4 type B0 using 12.50mm graded aggregae in roof kerbs of mud stops, rounded or chamfered on edges all as directed at site

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified.

M&L Complete removal exising old surfaces of wall / ceiling by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying two coats of weather proofing exterior acrylic emulsion paint from manufacturer complete all as specified and directed by Engineer-in-Charge.Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Dismantling of Rcc posts embedded in concrete completeall as specified.

M&L for Cement concrete 1:3:6 type C2 using 40mm aggragate in foundations, filling and mass-concrete

S&F high quality zinc coated GI Chain link fencing of required width in mesh size 50x50 mm made of GI wire dia not less than 3mm and fix with column with nut or bolts and strengtheing with 10mm TMT bars, conforing to standard grade steel complete all as specified and directed. NOTE:- (i) Payment of TMT bar shall be made in seperate items in this Schedule. (ii) The Engr-in-Charge along with rep of contractor shall verify the weight mesh and submit the copy along with photographic eveidence along with RAR and Purchase Voucher. (iii) The quoted rate shall be inclusive of Nut bolt required.

Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. all as specified and directed

M & L for Flush pointing in CM 1:4 to brick on edge pavings/drains/roofs etc all as specified and directed.

Supply and fixed pre-cast concrete blocks for kerb stone with solid block exc 10 cm in width type C-1 , 1:3:6 ( using 20 mm graded stone aggregate) set in CM 1:6 of any shape and size as approved by Garrison Engineer, including necessary excavation and earth work including returning filling in the earth and removal of surplus earth from site if any, kerb stone shall be fixed in true line and level or in curves for edging of road side path including embedding PCC pre cast block in ground to any depths as required and tamping soil around PCC bloacks complete all as directed at site incl two coat of enamel paint over a coat of primer of kerb stone blocks complete all as directed.

S&F MS work as in Fencing Posts, Swan necks, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of fencing wire or other covering. etc. also fastening and fixing complete incl cleats, brackets, complete of Fe 410-W (Gde e-250) quality B complete all as specified and directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts,including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. incl dismantling of unserviceable barbed wire as directed (each line wire to be measured) all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall and applying two coats of cement base paint including complete removal of old treatment complete all as specified.

Dismantling of Ms work in any description completeall as specified.

S & F in repairs 100mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc all as specified and directed.

S & F in repairs 75mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc all as specified and directed.

S & F in repairs Cast iron Bends/Tees of 100mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc all as specified and directed.

S & F in repairs cast iron Bends/Tees of 75mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc all as specified and directed.

S&F in repair of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints with necessary bends/tees/sockets etc fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified.

Taking down cement Plaster of any thickness from brick or stone walls and concrete etc including raking out joints, jacking for key, scrubbing down with water etc including removal of rubbish outside Defence land, complete all as specified

M & L for rendering 5 mm thick in cement plaster 1:3 onconcrete surfaces , in ceilings, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L for Preparation of new surfaces (Plastered or un-plastered) on ceiling and applying three coats of white wash, complete all as specified.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls applying three coats of white lime wash, complete all as specified.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls applying two coats of cement based paint, complete all as specified.

Schedule of Credit

GIAN ENGINEERS

SHREE RAM BUILD TECH

LAMBA ENTERPRISES

S D Constructions

a.k constructions

SHIVA ENTERPRISES

Akarsha Enterprises