Loading
Loading…
Loading…
Tender Value
₹50.0 L
EMD Value
₹99,980
Closing Date
6 Jul 2026, 6:00 pm
GE DEOLALI
MILITARY ENGINEER SERVICES, ON SLOW ROAD, DEOLALI CAMP, NASHIK MAHARASHTRA PIN 422401
PAINTING AND POLISHING TO STEEL / WOODEN FURNITURE IN UNIT LINES/MD ACCNS UNDER THE AOR OF GE DEOLALI
2026_MES_772055_1
8194/E8
Open Tender
Miscellaneous Works
180 days
GE DEOLALI
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE DEOLALI
₹99,980
Yes
13 Jun 2026
13 Jun 2026
8 Jul 2026
13 Jun 2026
6 Jul 2026
29 Jun 2026
13 Jun 2026 - 20 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Material and labour for preparing of old/new polished wood based furniture articles as per the following steps:- Step 1 Sanding:- The wood components shall be rubbed with sand paper No 120 along the grains to remove any dust/ wax/unwanted stains from the surface, the sanding will be repeated with sand paper between 180-220 grit in order to achieve the smooth surface and the wood will be wiped clean with soft clean cloth complete all as specified and directed by Engr - In - Charge. Steps 2 : Staining : Any cracks or holes shall be filled with wood filler of good quality approved by Engr -In - Charge. After the wood filler has dried completly sanding with a stain of approved shade will be then applied to the prepared surface with the help of a soft malmal cloth or brush along the grain'. two to three coats of staining will be done letting the stain dry completly between each coats and sanding every time very fine grit sand paper ( 220-320) NOTE: Excess stain should be wiped off before drying and getting absorbed in wood. Step 3 Polishing : Wood will be finished with a good quality french polish ( mixture of shellac grains and methylated spirit in ratio 1: 10) two to three coats shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required,Polish shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed by GE DVL / Engr - In - Charge. Step 4 Varnishing : Two to three coats Varnish shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required,Varnish shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed by GE DVL / Engr - In - Charge. Make : Kohinoor/ wilson/Asian/Burger | |||||
| 1.01 | Book Case FD 45 | 205 | Each | - | - |
| 1.02 | Bin solid Linen FD 70 | 81 | Each | - | - |
| 1.03 | Bed W/Ply top w/o FMN FD 246/247 | 320 | Each | - | - |
| 1.04 | Chair dining FD 279 | 1,950 | Each | - | - |
| 1.05 | Chair Easy FD 229 | 720 | Each | - | - |
| 1.06 | chair writing FD-280/250 | 350 | Each | - | - |
| 1.07 | Chair CB W/O Arms DB 3972 | 120 | Each | - | - |
| 1.08 | Chair Easy Cushioned FD 358 | 160 | Each | - | - |
| 1.09 | Display Board 1220x 1220mm TP | 76 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.09 MB
generalpages1.pdf
Tender Documents • 0.30 MB
bothParticularSpecifications.pdf
Additional Documents • 0.10 MB
BOQ_864521.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
