PROVN OF CHAIN LINK FENCING, 2X ENTRANCE GATES AND HARD STANDING FOR SCHOOL BUSES AT BLDG NO P-539 OF HQ MB AREA AND CERTAIN MINOR WORKS IN THE AREA OF AGE B/R-I UNDER GE (W) JABALPUR

Amount

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed by Engr-in-Charge

S&F for Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F, Mild steel screw bolts 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 5cm long complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and as directed.

Supply & Fixing in repair chain link fencing galvanised iron hot dipped including fixed with mild steel fillets of any mesh, size and type to any type of standards, rails, straining bolts including provision of binding wire or steel clips complete all as specified & directed.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by engre-in-charge.

Preparing new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engre-in-charge.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engre-in-charge.

Preparing new steel surface n.exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engre-in-charge.

Excavation in treanches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells exc 10 sqm on plan and getting out any type of soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation & mass concrete complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Returning filling in including, spreading, levelling, watering and well ramming in layer n. exc. 25 cm in soft/ loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M & L preparation of walls newly plastered surfaces & applying two coats of cement based paint over a coat of cement primer complete all as specified and as directed..

M&L Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like all as directed incl necessary form work complete all as specified and as directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

M & L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing fixed over and including screed bed 15 mm thick in CM 1 : 6 etc all complete all as specified and as directed.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F of aluminium powder coated section, as in frame for door, window, ventilators,fix glazing and partitions of standard section and thickness as directed , cut and jointed together with cadium plated steel screws, plugs for fixing screws, etc. complete all as specified and as directed by the Engineer-in-Charge. Note-(i) Fixing of frame shall be as per manufacturers instructions and all fitting shall be paid under this item (ii) Thickness of powder coating shall not be less than 50 micron. (iii) Frame shall be one or more rebate as per requirement at site.

Supply and fixing for aluminium alloy (powder-coated) door shutters with hollow aluminium sections as specified including aluminium powder coated snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, Mortice lock 4 levers (vertical type), two numbers of aluminium alloy anodized tower bolts 200mm long to each leaf, etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Shutter top 83.50mmx44.45mmx1.87mm thick. (b) Shutter bottom 104.00mmx44.45mmx 1.80mm thick (c) Shutter vertical 83.5mmx44.45mmx1.87mm thick (d) Shutter middle 100.00mmx 44.45mmx 2.00mm thick (e) Gauging clip weighing not less than 0.097kg/metre (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. 2. Glass pane shall be measured and paid separately.)

Supply and fixing for aluminium alloy powder-coate) window frame with shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows including aluminium alloy snap type beads, handles, aluminium barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a) Section for shutter 47.62x44.45x1.87 mm thick (b) Glazing clip weighing 0.259kg/mtr. (c) Windows shall be provided with 02 Nos. of tower bolt of size 125mm for single leaf shutter and 03 Nos. for double leaf. Handles shall be aluminium ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and 01 No on each openable leaf shall be provided. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. 2.Glass pane and wire gauge shall be measured and paid for separately.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S&F 3 mm figured glass, pin head type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S & F Sheet glass 5 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed..

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete complete all as specified and as directed..

S&F Galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacting and straining and fixing to any type of standard rails, including securing or tying at crossing etc as directed.

S&F of reinforced cement concrete pipes 450mm bore class NP-2 Laid and jointed complete with collars all as specified and as directed.

Excavation over areas not exc 1.5 mtr in depth for culvrerts, cesspit, manholes etc and getting out, complete all as specified.

M&L Formwork to sides of concrete foundation, footings and similar works vertical concrete (rough finished flat surfaces of concrete), complete all as specified.

Formwork to curved faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces complete

M&L for RCC M 25 (design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified

M&L for RCC M 25 (design mix) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc all as specified

M&L Plain cement concrete (1:3:6) type C-2, using 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified.

M&L Plain cement concrete (1:2:4) type B-1, using 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified.

S & F for Logo of appropriate size and pattern as directed Size not less (0.60x1.20 Mtr) made of ACP sheet complate all as specified and directed

M & L for fixing of Letter of an minimum ht 0.45 mtr and fixing of ACP sheet with adequate designing lights complate all as specified and directed

M&L for black colour Solid ACP wall lining consisting of 2mm thick plain colour ACP sheet inclusive of solvent cement and fixing at site on aluminium frame and all necessary fixings and prepration of surface as per specifications and drawing complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-290 ( Gde E-165).

S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc complete all as specified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S&F, Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

M&L MS work as in wind ties for roof including securing bolts, drilling holes, notching for wire etc complete all as directed.

Surface excavation n.exc not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 , using 40 mm graded stone aggregate as in sub base for paver block.

M & L Machine pressed coloured precast concrete rubbber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-35 Grade.

M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry and pointed in white on coloured cement to match as in floors etc layed over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick etc all complete (Make-H & R Johnson, Brand-Endura designer digital series)

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floors as sub base using extra cement in patches etc all as specified and directed by Engr-in-charge.

M & L for 50 mm thick Sand filling below the interlocking paver block including watering and consolidation complete all as specified and as directed

Moorum filling under floor or foundation incluiding spreading leveling watering in layers not exeeding 15 cm thick each complete all as specified and as directed.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets ,including fixing of hold fast in PCC 1:2:4 type B1 ( using 20 mm graded stone aggregate ) making good of disturbed portion complete all as specified and directed.

M & L for 20mm thick granite (of any type) work Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Stainless Steel letters or figures (Block, Roman, Itallic or Indian) of size not less than 30cm high fixed with Brass CP Machine Screw in Piller/Post/Gate including necessary Scaffolding complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 4 core complete all as specified and as directed

Supply and fixing LED street light fitting 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete 35 watt. all as required and directed.

Supply , laying and testing PVC insulated ,PC sheathed cable galvanised steel strip or wire armoured electric control cables with straanded copper conductor of size 2 core 4 sqmm all as required and directed.

Supply and fix in replacement of nature switch complete with timer contactor,relays,and suitble rating MCB for incoming and outgoing in built in suitable sheet metal enclosure,all fixing arrangement of three phase integrated models of capacity 8 KW (Cat Prt No SWADEEP -02 EC 8 KW 3P of HEALER enterprises or equivalent as approved by GE)

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. -1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply and fix junction box pole mounted type all as specified and as directed.

Supply and fix post top lantern light LED 20 Watt all as per required and directed by Engr In charge.

M and L for cutting of roads /trenchless technology method all as per required and directed by Engr In charge.

Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge.

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

RAVI ENTERPRISES

DEEPAK CONSTRUCTION

Kirti Chandeliya and Assosicates

M/s Kehar Engineers

KRD ASSOCIATE

Tiki Water proofing Co

M/S RAJ BUILDERS

a k builders