P, L COMPACTION FOR DBM 50 MM THICK (HMP MIX), BC 30 MM THICK COMPACTED (HMP MIX) AND APPLY PRIME COAT, TACK COAT, RD MARKING WITH THERMOPLASTIC PAINT FROM KM 5.00 TO KM 15.00 FOR SUR WKS ON RD HUNLI-METENGLING-HAYULING OF 62 RCC UNDER 752 BRTF

Amount

PROVIDING, LAYING AND COMPACTION FOR DBM 50 MM THICK (HMP MIX), BC 30 MM THICK COMPACTED (HMP MIX) AND APPLYING PRIME COAT, TACK COAT, ROAD MARKING WITH THERMOPLASTIC PAINT FROM KM 5.00 TO KM 15.00 FOR SURF WORKS ON ROAD HUNLI-METENGLING-HAYULING OF 62 RCC UNDER 752 BRTF

Providing, laying and compaction of 50 mm thick DBM (Dense Bituminous Macadam) layer over WMM Surface including preparation and correction of existing surface with pre-coated stone chips grading confirming to Table: 500-10 and aggregates satisfying the physical requirement of table 500-08 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 4.7% bitumen VG-30 (Viscosity Grade-30) by weight of total mix and 2% filler by weight of total mix and 2% filler by weight of mix complete in all respect and all as specified and directed by Engineer-in-Charge.

Providing, laying and compaction of 30 mm thick BC (Bituminous Concrete) layer including preparation and correction of existing surface with pre-coated stone chips grading confirming to Table: 500-17 and aggregates satisfying the physical requirement of table 500-16 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 5.6% bitumen VG-30 (Viscosity Grade-30) by weight of total mix and 2% filler by weight of total mix and 2% filler by weight of mix complete in all respect and all as specified and directed by Engineer-in-Charge.

Providing and applying Prime Coat over WMM surface by mechanical mean confirming to clause 502 of MORT&H specification with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spreading primer @ of 7.5 kg/10 sqm (RS-1 grade) using emulsion pressure distributer, all complete as per clause 502 of MoRT&H Specification of Road & Bridge (5th Revision) complete in all respect all as specifed and directed by Engineer-In-Charge.

Providing and applying Tack Coat over Bitumen Emulsion using emulsion pressure distributer @2.5 Kg/10 Sqm (RS-1 grade) or using low viscosity grade paving bitumen of VG-10 grade using bitumen pressure distributer on prepared bituminous / granular surface cleaned with mechanical broom, all complete as per clause 503 of MoRT&H Specification for Road & Bridge (5th Revision) complete in all respect all as specified and directed by Engineer-In-Charge.

Providing and applying Road marking with thermoplastic paint (2.5 mm thick) conforming to MOST: 803.4 including preparation of surface complete in all Respect as specified and directed by Engineer -In -Charge.

Ganpati Builders

M/s. GRRB ASSOCIATES