Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹33.4 L+₹99,815 (3.08%)Rejected-Finance D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹33.7 L+₹1.2 L (3.85%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹34.2 L+₹1.8 L (5.61%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹34.6 L+₹2.1 L (6.59%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹43.4 L
EMD Value
₹86,800
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW PIN 226002 C/O 56 APO
ADDN / ALTN TO FORT WALL AND PROVN OF SALUTING DAIS AT PARADE GROUND AT 11 GRRC UNDER GE (WEST) LUCKNOW
2023_MES_610648_2
GE/W/LKO/34 OF 2023-24
Open Tender
Civil Works
Item Rate
90 days
Lucknow
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE (WEST) LUCKNOW
₹86,800
Yes
27 Sept 2023
26 Aug 2023
18 Sept 2023
26 Aug 2023
16 Sept 2023
2 Sept 2023
26 Aug 2023 - 30 Aug 2023
Amount
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc for foundation etc and getting out in any type of soil complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Excavating over areas, exc 1.5 m deep and n.exc 3.0m deep and getting out in soft/loose soil complete all as specified and as directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Returning filling in and including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and as directed.
Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete acomplete all as specified and as directed.
M&L brick work with fly ash brick work straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 as per necessary design and pattern as approved by Engineer -in- Charge complete all as specified and directed.
Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.
M & L for RCC M-25 (Design Mix) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M & L for RCC M-25 (Design Mix) for Columns, pillars, piers, posts and struts, padestal etc complete all as specified and as directed.
M & L for RCC M-25 (Design Mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&l for RCC M-25 (Design Mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M & L for form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n. exc 200mm thick (horizontal or sloping), for flat rough finished surface of concrete complete all as specified and as directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M & L for formwork to sides of pillars, posts, struts, piers, columns, pedastal and stanchions complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.
M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
Material and Labour for rendering 15mm thick in CM 1:4 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of new plastered surface of wall and applying three coats of whitewash complete all as specified and as directed.
M & L for preparation of new plastered surface of wall and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and as directed.
M & L for preparation of new plastered surfaces of wall any description over 10cm width and girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.
Demolition of brick or stone/boulder masonry built in cement or cement lime mortar complete all as specified and directed.
M & L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) usingmarble dust with admixture of pigment to match with shade of granite including 15mm thick rendering in cement mortar 1.3 complete all as specified and as directed.
M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.
M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over 25mm thick sand cushioning and joint filled with fine sand incl levelling, tamping and sweeping etc complete all as specified and as directed.
M & L for PCC type B-1 (1:2:4) (20mm graded stone aggregate) as in benching and coping complete all as specified and as directed.
S&F stainless steel round balusters of 50mm dia and 70cm height including fixing in PCC bed block in cement concrete 1:2:4 of size 200 x 200 x 300mm/ over granite stone including necessary cutting of granite stone in proper shape and fixing and hanging arrangement for fixing chain etc complete all as specified and as directed.
S&F for 40 mm dia stainless steel pipe welded over balusters fix on steps complete all as specified and as directed.
M &L for roof tiles, Mangalore pattern, interlocking at side joints, laid over sloping roof over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M & L for 100mm dia GI tubing medium grade galvanised with all fitting and fixed/enbeding in brick wall complete or laid in floors complete all as specified and as directed.
M & L for filling soil including raising (or lowering) earth, spreading in layers n exc. 30 cm thick watering, ramming/rolling and finishing to required size, shape, etc n exc. 1.5 m high from base complete all as specified and as directed.
M&L hard core of broken stone of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to true surface complete all as specified and as directed.
M&L for 100mm thick PCC 1:3:6 type C1 (20MM graded stone aggregate as in sub-base complete all as specified and as directed.
Matrubhoomi Construction
m/s raghubar dayal
M/S PAVA ENGINEERS
M/S S S A ASSOCIATES
M/S KAUSHIK CONSTRUCTION
ANIL CONSTRUCTION
QUALITY CONSTRUCTIONS CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .