Repair to Road site Raising Footpath Firing range Drain pipes and fencing in Ojhar Repair to Roof and Certain MISC B R items in tech area Borgad and MISC repairs to small firing range at AF Station Deolali

Amount

(Serial item no 1 to 35 shall be excecuted at Ojhar) Demolition of cement concrete (unreinforced) in ground floors, pavings and walls of any description (below or above ground level).Complete disposal at beyond A1 defence land all as specified and directed by Engineer-in-charge.

M&L for cement concrete 1: 4 : 8 type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete. complete all as specified and as directed by Engineer-In-Charge.

S&F Precast concrete Kerb stone of size 300mm length x 450mm height and 150mm (R75) thickness or required size, Make : Hindustan, KK, Universal or equlivilent manufactured by M-30 grade of concrete by using vibro compection process with jointless FRP moulds, so as to get shuttering finish . all as specified and directed by Engr in Charge.

M&L for preparation of new concrete surface of any description over 10cm girth or width two coat of Exterior acrylic emulsion paint over one coat of priming paints plaster coat complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out hard/dense soil.

M&L hardcore of gouge n exc n exc 63mm broken stone or boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded crushed aggregate as sub base. complete all as specified.Completed all as specified and directed by Engineer-in-charge.

Supply and spreading sand under floors or in foundation including watering and consolidation

M & L for Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape ,size and colour confirming to IS 15658-2006of 80 mm thickness, M-40 Grade, Make : Hindustan , Universal, Mehtab or equlvilent all as specified and directed Engr-in-Charge.

M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed aggregate as filling, mass concrete complete all as specified and directed by Engineer-in-charge.

Demolition and breaking up AC Pipes of upto 200mm dia laid in trenches all as specified & as directed by Engr-in-Charge.

S&F PVC (SWR) pipe 160mm bore of pipe, single socket in any length with rubber ring joint, laid in floor all as specified and directed by Engr-in-Charge.

Labour only for taking out existing sand mixed with wooden saw dust, from the embankment of firing range , screenig through net then mixing the saw dust in proportion of 1:1, then again forming embankment at original place of firing range by raising height including ramming/rolling and finished to required size & shape etc not exceeding 1.5m high form the base Complete all as specified and as directed by Engineer-In-Charge. Note:- The additional saw dust and sand shall be added to the taking down materials after screening to maintain proportion 1:1 (Sand : Saw dust) , which are actually brought at site by Contractor, measured by deptt and paid separetly under below item No 17 & 18)

All as per item no- 13 above but height exceeding 1.5m hight and upto 3m complete all as specified and as directed by Engineer-In-Charge

All as per item no- 13 above but height exceeding 3m hight and upto 4.5m complete all as specified and as directed by Engineer-In-Charge

All as per item no- 13 above but height exceeding 4.50m hight and upto 6.00m complete all as specified and as directed by Engineer-In-Charge

Supply only screened river fine sand free from clay, silt and another foreign materials complete all as specified and as directed by Engineer-In-Charge.

Supply only wooden saw dust Complete all as specified and as directed by Engineer-In-Charge.

Dismantling posts or struts (wood ,steel or RCC) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete

Dismantling MS work as in Flat iorn and tie bars

Dismantling of galvanised, 2 strand steel barbed wire any dia and any position complete all as directed by Engr-in-Charge.

Dismantling fencing wire mesh any type

Excavation in post hole each not exceeding 0.5 cum getting out in hard/dense soil and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed by Engineer-In-Charge.

M & L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete.Complete all as specified and directed by Engineer-in-charge.

S&F for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.;flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F Mild steel flat iron and tie bars for fencing , fixed independently support for securing fencing wire/chain link fencing duly drilled hole and similar articles etc confirming to Fe 410 or Fe 310 complete all as specified and as directed by Engineer-In-Charge.

S&F Framed work such asd grills, grating, gates, including pintle hinges, stops, handmade sliding bolts ets including welding complte all as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end and the screwed the other to be fitted with washers and one hexagonal or square up to 5cm long of suitable dia n exc 12 mm . complete all as specified and as directed by Engineer-In-Charge.

Supplied only chain link MS galvanised fencing , any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.

Re-Fixing only chain link fencing after replacement of Post including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire .

M&L for Preparation of new or previously untreated surfaces of steel or iron surfaces exceeding 10cm width or girth and applying two coats of aluminium paint over one coat of red oxide primer.Complete all as specified and as directed by Engineer-In-Charge.

All as per item No 32 above but width or girth n.exc. 10 cm width or girth complete all as specified and as directed by Engineer-In-Charge.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed .

Supply and fix in repair for 18 mm thick block board , grade 2 quality ,interior grade , commercial type , fixed with screws to timber frame work .compete all as specified as directed by Engineer -in -charge

(Serial item no 36 to 46 shall be excecuted at Borgad) Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, pillars etc complete all as directed.

Demolition of Reainforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius builts in cement mortar 1:6 complete all as specified and directed.

M&L in repair providing precast cement concrete type B-0 1:2:4 (using 12.5 mm graded aggregate ) as in louvres and jallies 50mm thick including alll mouldings set in cement mortar 1:4 complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as In coping with & including necessary form work complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coats of exterior acrylic emulsion (apex) weather coat anti fungal over one coat of primer complete as specified and directed

S&F mild steel TMT round bars 10mm dia and over, cut to length , bent to shape required, including cranking , binding spirally for hooping end and binding with and including mild steel wire not less than 0.9 mm dia complete all as specified and directed.

All as per item no-43. above but 5mm dia and over up to & including 10mm dia in strips specers & binders.

Taking down carefully existing bitumen tarfelt including plaster of any description over the surfaces of roof erraces including flashings and unctions of parapets/curb walls etc and removing of the rubbisn to a distance exc 500m out exc 1.00km and depositing where directed complete all as specified and as directed

M&L for cleaning the newly plastered sufaces throughly with wire brushes and providing water proofing treatment all as directed and given here in after (a) Bituminious primer @ 0.3 ltr per sqm confirming to IS 3384-1986 in roof surfaces prior layin APP (b) Providing water proofing treatment with five layered membrane 3mm thick weighing not less than 3.5 kf/sqm APP modified bituminous membrane reainforced with non voven polyster mat of weight 160 gms/sqm as centre core applied by thermo fusion using LPG torch on the bottom portion of the membrane. (c) Applying two coat of bituminous aluminium paint @100gms per sqm over mebrane

(Serial item no 47 to 55 shall be excecuted at Deolali) S & F in repairs Galvanised. 2 strand, steel steel barbed wire 2.24mm dia barbed wire 2.24mm dia barbed with 2mm dia barbs at and fixing to any type of standard rails straining bolts, including, securing or bolts, including, securing or bolts, including, securing or bolts, including, securing or tying at crossings with and provision of galvanised mild pins including taking down existing barbed wire of any description , etc. as directed (each pins, etc. as directed (each line wire to be measured).

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as directed.

M & L rendering 15 mm thick on fairfaces of bk or stone masonary surfaces in CM 1:4 finished even and fair without using extra cement.

M & L for prepariation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant priming paints suitable for external surfaces all as specified and directed by Engineer-in-Charge.

Labour only for taking out existing sand mixed with wooden saw dust from the embankment of firing range, screening through net then mixing with screened sand obtained from range alongwith newly supplied fine sand and saw dust in proportion of 1:1:2 (i.e screned materials : New fine sand : new saw dust = 1:1:2) then again forming embankment at original place of firing range by raising height including ramming/rolling and finished to required size & shape etc not exceeding 1.50M high from the base complete all as specified and directed by Engineer-in-Charge Note : (i) The wooden saw dust and extra sand needed shall be paid separately under below item No. 54 and 55.

All as per item No. 51 above but height exceeding 1.5M hieght and upto 3.00M complete all as specified and directed by Engineer-in-Charge.

All as per item No. 51 above but height exceeding 3..00 hieght and upto 4.50 M complete all as specified and directed by Engineer-in-Charge.

Supply only screened river fine sand complete all as specified and as directed by Engineer-in-Charge.

Supply only wooden saw dust complete all as specified and as directed by Engineer-in-Charge.

M/s.TIRUPATI BUILDERS

SHRI SULAI ELECTRICALS

YASHRAJ ELECTRICALS

United Enterprises

VINIT ASHOK KORE

N.U. MIRZA