Balance work for Construction of Nuclear Medicine Block at SKIMS.

Amount

Carriage of materials by mechanical transport including loading, unloading and stacking.( Earth upto 5 km)

Earth work in excavation by mechanical means (Hydraulic excavator ) over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.( All kinds of soil)

Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.( All kinds of soil)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : including all carriage.

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).( Crushed)

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). ).( Crushed)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level,excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) ( (crushed) including all carriage.

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand) including the cost of required centering, shuttering complete. 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).(crushed)

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed by dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including sinishing the top smooth

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

Walls (any thickness) including attached pilasters, butteresses, plinth and string course etc.RCC work upto floor V-level (walls of 1st and 2nd floor)

Suspended floors, roofs, landings, balconies and access platform.(upto floor 5th level)

Lintels, beams, plinth beams, girders, bressumers and cantilevers. (upto floor 5th level)

Columns, Pillars, Piers, Abutments, Posts and Struts.(upto floor 5th level)

Stairs (Excluding landings) except spiral staircase.(upto floor 5th level)

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.(upto floor 5th level)

Edges of slabs and breaks in floors and walls.( Under 20 cm wide).(upto floor 5th level)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.( Thermo-Mechanically Treated bars.)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 410kg. of cement per cum of concrete. All work upto floor V level including walls of 1st and 2nd floor.and all carriage.

All works upto Plinth Level walls and foundation of delay tank.

All works above Plinth Level wall of 1st and 2nd floor.columns,slabs ,beams ,lintel etc upto floor v-level.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:( (Cement mortar 1:6 (1 cement : 6 coarse sand) including all carriage.

Extra for brick work in superstructure above plinth level upto floor V level (by manual means)

Half brick masonry with bricks of class designation 7.5 in foundation ans plinth in : (Cement mortar 1:4 (1 cement :4 coarse sand) including all carriage.

Extra for half brick masonry in superstructure above plinth level upto floor V level

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.( Granite of any colour and shade (Area of slab over 0.5 Sqm)( 18 mm thick)

Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.( Granite work.)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : (35 mm thick including ISI marked MS pressed bright finished butt hinges with necessary screws of required size.)

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) :( (Rectangular or square.)

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer (having superior brand), embossed on the body, door weight upto 36 kg to 80 kg and door width from 700 mm to 1000 mm, with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (300x16 mm)

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing 50cm long aluminium kicking plate 100x3.14 mm anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (Twin rubber stopper)

Providing and fixing aluminium casement stay ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing& Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality(1 mm thick)

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete as per approved design & make (best make of approved quality).

Structural steelwork in single section fixed with connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steelwork welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.( M.S. tube (medium) 40mm nominal bore.)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.( 40 mm thick with 20mm nominal size stone aggregate.) including all carriage.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.( Size of Tile 60x60 cm)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (25 mm thick.)

Kota sone slab 25mm thick in riser of steps, skirting, dado and pillars laid on 12 mm (averagea0 thick cement mortar 1:3 (1 ; cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. (Size of Tile 600x600 mm)

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 15622of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sum including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing ceramic glazed wall floor tiles 300x300 mm(thickness to be specified by the manufacturers) of 1st quality confirming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as White, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of Cement Mortar 1:4( 1 Cement: 4 Coarse Sand) including pointing the joints with white cement and matching pigments etc. Complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining,skirting and dado (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately).

Providing and fixing of 2mm thick imported vinyl flooring, 100% recycled flexible, homogeneous antistatic calendared compacted floor covering suitable for heavy traffic areas having total weight 2950 g/m2 in sheet of size 2mtrs. x 20 mtrs. in approved pattern & colour combination with EvercareTM – patented polyurethane surface treatment with unique performance in staining providing unrivalled chemical and scratching resistance. Having wear resistance of ≤ 4.0mm3 as per EN 660.2 and Wear Group ‘ T ‘ as per EN-649 and should have a residual indentation of <0.03mm confirming to EN-433. The laid flooring should have semi- directional design, colour dyed as a raw mixture to ensure even colour throughout the thickness and its surface should be densely compacted for improving wear and ease of maintenance with Anti-bacterial and Fungicidal properties. The laid flooring shall confirm the fire rating B1 class as per EN 13501-1. It should have low VOC contain as TVOC after 28 days <10 µg/m3 as per ISO 16000-6. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. The joints in the flooring should be sealed by using a PVC welding bar of matching colour to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring. The vinyl sheet shall be laid & fixed with water based adhesive preferably AROBOND-44 of M/s. Arofine make or VC 31 of M/s Pidilite Ind. or any other make as per manufacturer’s specification as per direction and the entire satisfaction of Engineer-in-charge complete

Providing of 3 mm average thick layer of cementitious salt smoothening compound of Ardex CL-11 or equivalent as recommended by the Vinyl sheet flooring manufacturer over and including a priming compound of Ardex P-51 or equivalent as recommended by the Vinyl sheet flooring manufacturer on concrete surface to provide a smooth & homogenous surface for laying of vinyl sheet flooring complete to the entire satisfaction of Engineer-in-charge

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.( 0.63 mm thick with zinc coating not less than 275 gram/m2)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.( 0.63 mm thick with zinc coating not less than 275 gram/m2)

Ridges plain (500 - 600mm).

Gutter .(600 mm over all girth).

12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand) including all carriage.

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement : 6 fine sand) including all carriage.

6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) including all carriage.

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove

Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium plastic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.( Two or more coats)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content,water thinable cement primer.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion(Powder coated aluminium (minimum thickness of powder coating 50 micron)

For fixed portion(Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium window & ventilators shutters and partition etc with EPDM rubber/neoprene gaskets etc complete as per the architectural drawing and the directions of engineer in charge. ( cost of aluminium snap beading shall be paid in basic item) With float glass pane of 5.50 mm thickness

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of W.C. kitchen and the like consisting of (1) 1st course of applying cement slurry @4.4Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding of junctions of vertical and horizontal surfaces. (2) IInd course of 20mm cement plaster 1:3( 1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions including roundong of junctions of vertical and horizontal surface. (3) IIIrd course of applying blown or/ residual Bitumin applied hot at 1.7 Kg per sqm. (4) Fourth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumin @1.7 Kg per sqm.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm eight including rounding of junctions of walls and slabs c)After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. With average thickness of 120mm and minimum thickness at khurra as 65 mm.

Providing and fixing of G.I pipe including G.I fittings and clamps including cutting and making good the walls.

15mm nominal bore

20mm nominal bore

25mm noiminal bore

40mm noiminal bore

Providing and fixing of C.P bib cock of approved make (Jaquar / Parko) Short Body.

Providing and fixing of C.P bib cock of approved make (Jaquar / Parko) Long Body.

Providing and fixing of CP angle value of approved make (Jaquar / Parko).

Providing and fixing of CP wall mixer of approved make (jaquar / Parko).

Providing and fixing of CP Basin Mixer elbow action mixer of approved make (jaquar / Parko).

Providing and fixing stainless steel A ISI 304 kitchen sink (18/8) with CI Brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required.(Size 610x510x200mm)

Providing and fixing of PVC connections of approved make 18" length.

Providiing and fixing of sink waste 100mm of approved make.

Providing and fixing of flexible waste pipe of approved make (32mm)

Providing and fixing of CP health faucet of approved make (Jaquar / Parko).

Providing and fixing of Mirror of superior quality of approved make.

Providing and fixing of c.p soap case of approved make

Providing and fixing of Cp grating of approved make

Providing and fixing of ball value of approved make

Providing and fixing of following fittings of approved make:

GI union 15mm

union 20mm

Union 25 mm

Union 40 mm

Reducer 25x20

Reducer 20x15

Reducer 25x40

Providing and fixing of water closet squatting pan ( Indian type WC pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures complete including cutting and making good the wall and floors whereever required. white viterous china orissa Pattern WC pan of size 580x440mm with integral type foot rests

Providing and fixing white viterous china pedastal type water closet (European type WC pan) with seat and lid, 10 litre low level white PVC cisern, including flush pipe with manually controlled device (Handle lever) conforming to IS:7231 with all fittings and fixtures complete including cutting and making good the walls and floors whereever required.

Providing and fixing white viterous china flat back or corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and Cp brass unions and GI clamps complete including painting of fittings and brackets, cuttings and making good the walls and floors whereever required. one urinal basin with 5 litre white PVC automatic flushing cistern.

Providing and fixing wash basin with Ci brackets 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required white vitreous china wash basin( size 550x400mm).

Providing and fixing of china pedastal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing of CP nipples of approved quality and manufacture:

Providing and fixing of toilet paper holder CP bras of approved quality and manufacture (jaquar/Parko/Hindware)

Providing and placing on terrace (at all floors levels) polyethylene water storage tank with cover and suitable locking arrangement and making necessary holes for inlet and outlet and overflow pipes but without fittings and base support.

Providing and fixing of glass shelves 600x120 mm of approved quality and manufacture.

Providing and fixing of brass ball cock of approved quality and manufacture..

P./f of tanky nipples of approved quality and manufacturer.(25mm)

Providing and fixing of PVC pipes of approved make C – Class (Prince, Finolex or equivalent as approved by engineer In Charge ) including rubber gasket etc.

Providing and fixing of PVC fittings of approved make:

Plain bend(150mm)

Plain tee(150mm)

Floor trap(75 mm)

Plain bend (75 mm)

Plain bend(40mm dia)

Plain bend(100mm)

Door Tee (100mm)

junction 75*150

junction 100*150

Construction of brick masonary manhole in cement manhole in cement mortar 1:4 mix with RCC top slab with 1:1.5:3 mix foundation concrete 1:4:8 mix, inside plastering 12mm with cement mortar 1:3 mix with floating coat of neat cement slurry and making channels with inside dimensions 90x80x45 cm including C.I Cover and frame.

GHULAM JEELANI BHAT

M.N.Enterprises