REPAIR TO ROAD AND ROAD FURNITURE ETC AT KWC AND METCALFE HOUSE AREA UNDER GE I RND DELHI

Amount

M&L for repair to pot holes any depth, not exc, 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5Kg per 10 Sqm, putting in pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg/10 Sqm and blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30mm complete all specified and directed.

M&L for preparing of existing black top surface by brooming or brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dust etc and applying evenly a priming/ tack coat with bituminous primer of paving bitumen(VG-10) @ of 5 Kg /10 Sqm with mechanical sprayer and laying of Bituminous premixed Semi Dense Asphaltic Concrete 30 mm thick consolidated thickness with binder content of paving bitumen (VG-30) @ 5.5 % by weight of total mix including supply of filler (OPC cement) as per design mix, spread using Mechanical sensor paver rolled and compacted with 8 to 12 ton power road roller to a required camber and gradient complete all as specified and directed. The content of Bitumen specified in this item is maximum content,in case, the quantity of Bitumen required is less as per approved design mix, the minus price adjustment for less quantity of bitumen shall be made @Rs.50.00/Kg Note " Material shall be broght at site from approved / authorised Hot Mix plant at any distance. Hot mix plant shall be got approved fromGE(I).

M&L for painting hinting lines on roads n exc 15cm wide with hot applied thermoplastic compound paint confirm to MOST specified painting as per manufacturers direction specification, mechanically applied to form 1.5mm thick film on road lined including cleaning and drying the existing road surface dust, oil, grease and moisture free surface before applying the paint complete all as specified and directed.

S&F in repair HDPE Plastic Speed bump resistant to severe impacts and harsh weather conditions. Its interlocking sub units make it bind perfectly in a one firm bump. The precoated coloured material (Black/Yellow) and UV stabilizers keep them perpetually colourful, studded with reflectors on either side height 75 mm, weight not less than 2180 gm fixed with metallic bolts/MS studs/Anchor fastener and suitable adhesive as per requirement complete all as specified and directed.

S&F in repair solar road studs in red, yellow, white colour lights, 125mm x 125mm x 25mm water proof with six super bright LEDs with 10000 to 18000 med (Milli candela), view distance upto 1000 meters, flash rate not less than 2 Hz and bearing capacity of not less than 10 tonnes including one high capacity Ni-Cd (Nickel Cadmium) rechargable battery complete all as specified and directed.

S&F convex mirror of 800 mm dia size made of polycarbonate plastic, outdoor type mounted on stainless steel frame and fixed in position at height as recommended by NHAI or IRC including all fixing arrangements complete all as specified and directed.

S&F in repair two way highly reflective ABS plastic body road studs/Cat eye size 80 x 105 x 22mm in red, amber or white reflective panel wight not less than 312 grams fixed to road surface with MS stud/anchor bolts complete all as specified and directed.

S&F in repair stainless steel (Grade 304) hollow round or square pipe of minimum 16 gauge thickness fixed as in posts for sign board with frame work structure as design by Engr-in-Charge for fixing sign board, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete all as specified and directed. Note:- Excavation & earth work in post hole and PCC work will be measured and paid spearately in respective item of BOQ.

S&F in repair direction sign board of any size with 2mm thick aluminium composite panel comprising both side high intensity prismatic grade retro reflective sheeting as base and with cut out massage (legends borders letters / numerals etc) as directed with high intensity prismatic grade retro reflective sheeting both side of boards with epoxy powder coating, including fixed over framed work of stainless steel complete all as specified and directed. The following specifications for sign board to be used :- (i) Paper used for printing should be 170 GSM Reflective Vinyl. (ii) Printing of letter with Mutoh Eco Solvent. (iii) Base of material shall be used 3mm Alcabond.

S&F in repairs ABS round body delinators fitted with 02 Nos 100 mm dia highly reflective reflectors, made of PMMA material in red / white / yellow colour as required mounted on powder coated rectangular steel pipe 25mm x 75mm x 600mm long complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided including removing the demolished material out side MoD land in low lying areas complete all as specified and directed.

S&F at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L for factory made machine pressed, pre polished coloured interlocking paver block with Grey cement and pigment, any shape and size, 60 mm thick confirming to M-35 grade laid over and including 40mm thick (compacted thickness) sand cushion complete all as specified and directed.

M&L for prepolished coloured chequered cement concrete tiles 300x300x25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over & including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises etc complete all as specified and directed.

M&L for 1st quality glazed ceramic designer coloured tiles in stones / Mat finsih of size 450x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brick work with sub class `B` bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item ser No 20.00 above but except bricks complete all as specified and as directed. Note : Serviceable bricks obtained from item No 19.00 shall be reused

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepration of new plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25 cm watering and removing surplus soil to a distance n exc. 50 mtr complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded mechanically crushed stone aggregates as in post holes, foundation filling and mass concrete complete all as specified and directed.

Sree Ram Enterprises

SAWARIYA ENGINEERS AND CONTRACTORS

DR Buildcon